lkml.org 
[lkml]   [2019]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 01/13] dt-bindings: media: Add binding for MT2712 MIPI-CSI2
On Tue, May 14, 2019 at 02:13:38PM +0800, Stu Hsieh wrote:
> Add MIPI-CSI2 dt-binding for Mediatek MT2712 SoC
>
> Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
> ---
> .../bindings/media/mediatek-mipicsi-camsv.txt | 53 ++++++++++++++++++
> .../media/mediatek-mipicsi-common.txt | 19 +++++++
> .../bindings/media/mediatek-mipicsi.txt | 54 +++++++++++++++++++
> 3 files changed, 126 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/mediatek-mipicsi-camsv.txt
> create mode 100644 Documentation/devicetree/bindings/media/mediatek-mipicsi-common.txt
> create mode 100644 Documentation/devicetree/bindings/media/mediatek-mipicsi.txt
>
> diff --git a/Documentation/devicetree/bindings/media/mediatek-mipicsi-camsv.txt b/Documentation/devicetree/bindings/media/mediatek-mipicsi-camsv.txt
> new file mode 100644
> index 000000000000..5f34974f12ac
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek-mipicsi-camsv.txt
> @@ -0,0 +1,53 @@
> +* Mediatek MIPI-CSI2 receiver camsv
> +
> +Mediatek MIPI-CSI2 receiver camsv transfer data to DRAM in Mediatek SoCs
> +
> +Required properties:

compatible?

> +- reg : physical base address of the mipicsi receiver registers and length of
> + memory mapped region.

How many regions? Looks like 2.

> +- clocks: device clocks, see
> + Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> +- interrupts : interrupt number to the interrupt controller.
> +
> +Example:
> + seninf1_mux_camsv0: seninf_mux_camsv@15002100 {

Node names should be generic.

mipi-csi@...

Or maybe not as that's the last block...

> + reg = <0 0x15002120 0 0x40>,
> + <0 0x15004000 0 0x1000>;
> + clocks = <&imgsys CLK_IMG_CAM_SV_EN>;
> + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + seninf2_mux_camsv1: seninf_mux_camsv@15002500 {
> + reg = <0 0x15002520 0 0x40>,
> + <0 0x15005000 0 0x1000>;
> + clocks = <&imgsys CLK_IMG_CAM_SV_EN>;
> + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + seninf3_mux_camsv2: seninf_mux_camsv@15002900 {
> + reg = <0 0x15002920 0 0x40>,
> + <0 0x15006000 0 0x1000>;
> + clocks = <&imgsys CLK_IMG_CAM_SV1_EN>;
> + interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + seninf4_mux_camsv3: seninf_mux_camsv@15002D00 {
> + reg = <0 0x15002D20 0 0x40>,
> + <0 0x15007000 0 0x1000>;
> + clocks = <&imgsys CLK_IMG_CAM_SV1_EN>;
> + interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + seninf5_mux_camsv4: seninf_mux_camsv@15003100 {
> + reg = <0 0x15003120 0 0x40>,
> + <0 0x15008000 0 0x1000>;
> + clocks = <&imgsys CLK_IMG_CAM_SV2_EN>;
> + interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + seninf6_mux_camsv5: seninf_mux_camsv@15003500 {
> + reg = <0 0x15003520 0 0x40>,
> + <0 0x15009000 0 0x1000>;
> + clocks = <&imgsys CLK_IMG_CAM_SV2_EN>;
> + interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_LOW>;
> + };
> diff --git a/Documentation/devicetree/bindings/media/mediatek-mipicsi-common.txt b/Documentation/devicetree/bindings/media/mediatek-mipicsi-common.txt
> new file mode 100644
> index 000000000000..a67c744b75f0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek-mipicsi-common.txt
> @@ -0,0 +1,19 @@
> +* Mediatek MIPI-CSI2 receiver common
> +
> +Mediatek MIPI-CSI2 receiver is the MIPI Signal capture hardware present in Mediatek SoCs
> +
> +Required properties:
> +- compatible: should be "mediatek,mt2712-mipicsi-common"
> +- reg : physical base address of the mipicsi receiver registers and length of
> + memory mapped region.
> +- clocks: device clocks, see
> + Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> +
> +
> +Example:
> + mipicsi: mipicsi@15002000 {
> + compatible = "mediatek,mt2712-mipicsi-common", "syscon";
> + reg = <0 0x15002000 0 0x10>;
> + clocks = <&imgsys CLK_IMG_SENINF_CAM_EN>,
> + <&imgsys CLK_IMG_SENINF_SCAM_EN>;
> + };
> diff --git a/Documentation/devicetree/bindings/media/mediatek-mipicsi.txt b/Documentation/devicetree/bindings/media/mediatek-mipicsi.txt
> new file mode 100644
> index 000000000000..24741ed62b25
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek-mipicsi.txt
> @@ -0,0 +1,54 @@
> +* Mediatek MIPI-CSI2 receiver
> +
> +Mediatek MIPI-CSI2 receiver is the MIPI Signal capture hardware present in Mediatek SoCs

What's the difference with this and the prior block? Same text...

> +
> +Required properties:
> +- compatible: should be "mediatek,mt2712-mipicsi"
> +- reg : physical base address of the mipicsi receiver registers and length of
> + memory mapped region.
> +- power-domains: a phandle to the power domain, see
> + Documentation/devicetree/bindings/power/power_domain.txt for details.
> +- mediatek,larb: must contain the local arbiters in the current Socs, see
> + Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> + for details.
> +- iommus: should point to the respective IOMMU block with master port as
> + argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
> + for details.
> +- mediatek,seninf_mux_camsv: seninf_mux_camsv the data go through of the mipicsi port

s/_/-/

How many entries? Needs a reference to the binding doc.

> +- mediatek,mipicsiid: the id of the mipicsi port

If this is for the 'mediatek,mipicsi' block, then just make the id a
cell value in the 'mediatek,mipicsi' prop.

> +- mediatek,mipicsi: the common component of the two mipicsi port
> +
> +Example:

I'd prefer one complete example showing all 3 components in this file
rather than piecemeal.

> + mipicsi0: mipicsi@10217000 {
> + compatible = "mediatek,mt2712-mipicsi";
> + mediatek,mipicsi = <&mipicsi>;
> + iommus = <&iommu0 M4U_PORT_CAM_DMA0>,
> + <&iommu0 M4U_PORT_CAM_DMA1>;
> + mediatek,larb = <&larb2>;
> + power-domains = <&scpsys MT2712_POWER_DOMAIN_ISP>;
> +
> + mediatek,seninf_mux_camsv = <&seninf1_mux_camsv0
> + &seninf2_mux_camsv1
> + &seninf3_mux_camsv2
> + &seninf4_mux_camsv3>;
> + reg = <0 0x10217000 0 0x60>,
> + <0 0x15002100 0 0x4>,
> + <0 0x15002300 0 0x100>;
> + mediatek,mipicsiid = <0>;
> + status="disabled";

Don't should status in examples.

> + };
> +
> + mipicsi1: mipicsi@10218000 {

This example doesn't add anything.

> + compatible = "mediatek,mt2712-mipicsi";
> + mediatek,mipicsi = <&mipicsi>;
> + iommus = <&iommu0 M4U_PORT_CAM_DMA2>;
> + mediatek,larb = <&larb2>;
> + power-domains = <&scpsys MT2712_POWER_DOMAIN_ISP>;
> + mediatek,seninf_mux_camsv = <&seninf5_mux_camsv4
> + &seninf6_mux_camsv5>;
> + reg = <0 0x10218000 0 0x60>,
> + <0 0x15002500 0 0x4>,
> + <0 0x15002700 0 0x100>;
> + mediatek,mipicsiid = <1>;
> + status="disabled";
> + };
> \ No newline at end of file

Fix this...

> --
> 2.18.0
>

\
 
 \ /
  Last update: 2019-05-14 21:28    [W:0.087 / U:2.360 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site