lkml.org 
[lkml]   [2019]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv1 6/8] arm64: dts: qcom: msm8996: Add PSCI cpuidle low power states
On Fri, May 10, 2019 at 04:59:44PM +0530, Amit Kucheria wrote:
> Add device bindings for cpuidle states for cpu devices.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/msm8996.dtsi | 28 +++++++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index c761269caf80..b615bcb9e351 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -95,6 +95,7 @@
> compatible = "qcom,kryo";
> reg = <0x0 0x0>;
> enable-method = "psci";
> + cpu-idle-states = <&LITTLE_CPU_PD>;
> next-level-cache = <&L2_0>;
> L2_0: l2-cache {
> compatible = "cache";
> @@ -107,6 +108,7 @@
> compatible = "qcom,kryo";
> reg = <0x0 0x1>;
> enable-method = "psci";
> + cpu-idle-states = <&LITTLE_CPU_PD>;
> next-level-cache = <&L2_0>;
> };
>
> @@ -115,6 +117,7 @@
> compatible = "qcom,kryo";
> reg = <0x0 0x100>;
> enable-method = "psci";
> + cpu-idle-states = <&BIG_CPU_PD>;
> next-level-cache = <&L2_1>;
> L2_1: l2-cache {
> compatible = "cache";
> @@ -127,6 +130,7 @@
> compatible = "qcom,kryo";
> reg = <0x0 0x101>;
> enable-method = "psci";
> + cpu-idle-states = <&BIG_CPU_PD>;
> next-level-cache = <&L2_1>;
> };
>
> @@ -151,6 +155,30 @@
> };
> };
> };
> +
> + idle-states {
> + entry-method="psci";

Please add a space before and after "=".

> +
> + LITTLE_CPU_PD: little-power-down {

In Documentation/devicetree/bindings/arm/idle-states.txt
they seem to use labels such as CPU_SLEEP_0_0 for the first
cluster and CPU_SLEEP_1_0 for the second cluster.

Please also consider my comment in patch 4/8.

> + compatible = "arm,idle-state";
> + idle-state-name = "standalone-power-collapse";
> + arm,psci-suspend-param = <0x00000004>;
> + entry-latency-us = <40>;
> + exit-latency-us = <40>;

Where did you get the latency values from?
Downstream seems to use qcom,latency-us = <80> for "fpc".

(Sure downstream also defines "fpc-def", but that seems to require
additional psci code/calls that doesn't exist upstream.)

> + min-residency-us = <300>;
> + local-timer-stop;

Are you sure that the local timer is stopped?
the equivalent DT property to "local-timer-stop" in downstream is
"qcom,use-broadcast-timer", and this property seems to be missing
from this node:
https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/arch/arm/boot/dts/qcom/msm8996-pm.dtsi?h=msm-4.4#n158

You could try to remove "local-timer-stop", if it is really needed,
then the system should hang without this property.


> + };
> +
> + BIG_CPU_PD: big-power-down {
> + compatible = "arm,idle-state";
> + idle-state-name = "standalone-power-collapse";
> + arm,psci-suspend-param = <0x00000004>;
> + entry-latency-us = <40>;
> + exit-latency-us = <40>;

Where did you get the latency values from?
Downstream seems to use qcom,latency-us = <80> for "fpc".

(Sure downstream also defines "fpc-def", but that seems to require
additional psci code/calls that doesn't exist upstream.)

> + min-residency-us = <300>;
> + local-timer-stop;

Are you sure that the local timer is stopped?
the equivalent DT property to "local-timer-stop" in downstream is
"qcom,use-broadcast-timer", and this property seems to be missing
from this node:
https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/arch/arm/boot/dts/qcom/msm8996-pm.dtsi?h=msm-4.4#n247

You could try to remove "local-timer-stop", if it is really needed,
then the system should hang without this property.


> + };
> + };
> };
>
> thermal-zones {
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2019-05-14 18:13    [W:0.090 / U:59.140 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site