[lkml]   [2019]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[RFC PATCH] ACPI: PM: Enable wake-up device GPEs for suspend-to-idle
I noticed that recently multiple systems (chromebooks) couldn't wake
from S0ix using LID or Keyboard after updating to a newer kernel, I
bisected and the issue is seen starting the following commit:

commit f941d3e41da7 ("ACPI: EC / PM: Disable non-wakeup GPEs for

and found that the issue gets fixed if I revert it. I debugged and
found that although PNP0C0D:00 (representing the LID) is wake capable
and should wakeup the system per the code in acpi_wakeup_gpe_init()
and in drivers/acpi/button.c:

localhost /sys # cat /proc/acpi/wakeup
Device S-state Status Sysfs node
LID0 S4 *enabled platform:PNP0C0D:00
CREC S5 *disabled platform:GOOG0004:00
*disabled platform:cros-ec-accel.0
*disabled platform:cros-ec-accel.1
*disabled platform:cros-ec-gyro.0
*disabled platform:cros-ec-ring.0
D015 S3 *enabled i2c:i2c-ELAN0000:00
PENH S3 *enabled platform:PRP0001:00
XHCI S3 *enabled pci:0000:00:14.0
GLAN S4 *disabled
WIFI S3 *disabled pci:0000:00:14.3
localhost /sys #

On debugging, I found that its corresponding GPE is not being enabled.
The particular GPE's "gpe_register_info->enable_for_wake" does not have any
bits set when acpi_enable_all_wakeup_gpes() comes around to use it. I
looked at code and could not find any other code path that should set the
bits in "enable_for_wake" bitmask for the wake enabled devices for s2idle
(I do see that it happens for S3 in acpi_sleep_prepare()).

Thus I used the same call to enable the GPEs for wake enabled devices,
and verified that this fixes the regression I was seeing on multiple of
my devices.

Signed-off-by: Rajat Jain <>
drivers/acpi/sleep.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 403c4ff15349..e52f1238d2d6 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -977,6 +977,8 @@ static int acpi_s2idle_prepare(void)
if (acpi_sci_irq_valid())

+ acpi_enable_wakeup_devices(ACPI_STATE_S0);
/* Change the configuration of GPEs to avoid spurious wakeup. */
@@ -1027,6 +1029,8 @@ static void acpi_s2idle_restore(void)

+ acpi_disable_wakeup_devices(ACPI_STATE_S0);
if (acpi_sci_irq_valid())

 \ /
  Last update: 2019-05-13 21:18    [W:0.054 / U:4.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site