lkml.org 
[lkml]   [2019]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] clk: meson: g12a: fix gp0 and hifi ranges
Date
While some SoC samples are able to lock with a PLL factor of 55, others
samples can't. ATM, a minimum of 60 appears to work on all the samples
I have tried.

Even with 60, it sometimes takes a long time for the PLL to eventually
lock. The documentation says that the minimum rate of these PLLs DCO
should be 3GHz, a factor of 125. Let's use that to be on the safe side.

With factor range changed, the PLL seems to lock quickly (enough) so far.
It is still unclear if the range was the only reason for the delay.

Fixes: 085a4ea93d54 ("clk: meson: g12a: add peripheral clock controller")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
drivers/clk/meson/g12a.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index 206fafd299ea..d11606d5ddbd 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -463,7 +463,7 @@ static struct clk_regmap g12a_cpu_clk_trace = {
};

static const struct pll_mult_range g12a_gp0_pll_mult_range = {
- .min = 55,
+ .min = 125,
.max = 255,
};

--
2.20.1
\
 
 \ /
  Last update: 2019-05-13 14:47    [W:0.047 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site