lkml.org 
[lkml]   [2019]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH v3 4/6] dt-bindings: soc/fsl: qe: document new fsl,qe-snums binding
Date
On Mon, 2019-05-13 at 11:14 +0000, Rasmus Villemoes wrote:
> CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
>
>
> Reading table 4-30, and its footnotes, of the QUICC Engine Block
> Reference Manual shows that the set of snum _values_ is not
> necessarily just a function of the _number_ of snums, as given in the
> fsl,qe-num-snums property.
>
> As an alternative, to make it easier to add support for other variants
> of the QUICC engine IP, this introduces a new binding fsl,qe-snums,
> which automatically encodes both the number of snums and the actual
> values to use.
>
> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
> ---
> Rob, thanks for the review of v2. However, since I moved the example
> from the commit log to the binding (per Joakim's request), I didn't

Thanks, looks good now.

> add a Reviewed-by tag for this revision.
>
> .../devicetree/bindings/soc/fsl/cpm_qe/qe.txt | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt
> index d7afaff5faff..05ec2a838c54 100644
> --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt
> +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt
> @@ -18,7 +18,8 @@ Required properties:
> - reg : offset and length of the device registers.
> - bus-frequency : the clock frequency for QUICC Engine.
> - fsl,qe-num-riscs: define how many RISC engines the QE has.
> -- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the
> +- fsl,qe-snums: This property has to be specified as '/bits/ 8' value,
> + defining the array of serial number (SNUM) values for the virtual
> threads.
>
> Optional properties:
> @@ -34,6 +35,11 @@ Recommended properties
> - brg-frequency : the internal clock source frequency for baud-rate
> generators in Hz.
>
> +Deprecated properties
> +- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use
> + for the threads. Use fsl,qe-snums instead to not only specify the
> + number of snums, but also their values.
> +
> Example:
> qe@e0100000 {
> #address-cells = <1>;
> @@ -44,6 +50,11 @@ Example:
> reg = <e0100000 480>;
> brg-frequency = <0>;
> bus-frequency = <179A7B00>;
> + fsl,qe-snums = /bits/ 8 <
> + 0x04 0x05 0x0C 0x0D 0x14 0x15 0x1C 0x1D
> + 0x24 0x25 0x2C 0x2D 0x34 0x35 0x88 0x89
> + 0x98 0x99 0xA8 0xA9 0xB8 0xB9 0xC8 0xC9
> + 0xD8 0xD9 0xE8 0xE9>;
> }
>
> * Multi-User RAM (MURAM)
> --
> 2.20.1
>

\
 
 \ /
  Last update: 2019-05-13 13:40    [W:0.119 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site