Messages in this thread Patch in this message | | | From | Anson Huang <> | Subject | [PATCH RESEND 2/5] ARM: dts: imx7d-sdb: Assign corresponding power supply for LDOs | Date | Sun, 12 May 2019 09:57:24 +0000 |
| |
On i.MX7D SDB board, sw2 supplies 1p0d/1p2 LDO, this patch assigns corresponding power supply for 1p0d/1p2 LDO to avoid confusion by below log:
vdd1p0d: supplied by regulator-dummy vdd1p2: supplied by regulator-dummy
With this patch, the power supply is more accurate:
vdd1p0d: supplied by SW2 vdd1p2: supplied by SW2
Signed-off-by: Anson Huang <Anson.Huang@nxp.com> --- No code change, just resend patch with correct encoding. --- arch/arm/boot/dts/imx7d-sdb.dts | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 202922e..efc83bc 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -379,6 +379,14 @@ status = "okay"; }; +®_1p0d { + vin-supply = <&sw2_reg>; +}; + +®_1p2 { + vin-supply = <&sw2_reg>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; -- 2.7.4
| |