lkml.org 
[lkml]   [2019]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/5] dt-bindings: phy: dp83867: Describe how driver behaves w.r.t rgmii delay
Date
Add a note to make it more clear how the driver behaves when "rgmii" vs
"rgmii-id", "rgmii-idrx", or "rgmii-idtx" interface modes are selected.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
---
Documentation/devicetree/bindings/net/ti,dp83867.txt | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt
index 9ef9338aaee1..e97f54aeac77 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83867.txt
+++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt
@@ -11,6 +11,12 @@ Required properties:
- ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h
for applicable values

+Note: If the interface type is PHY_INTERFACE_MODE_RGMII the TX/RX clock delays
+ will be left at their default values, as set by the PHY's pin strapping.
+ The default strapping will use a delay of 2.00 ns. Thus
+ PHY_INTERFACE_MODE_RGMII by default does not behave as RGMII with no
+ internal delay, but as PHY_INTERFACE_MODE_RGMII_ID.
+
Optional property:
- ti,min-output-impedance - MAC Interface Impedance control to set
the programmable output impedance to
--
2.14.5
\
 
 \ /
  Last update: 2019-05-10 23:47    [W:1.598 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site