lkml.org 
[lkml]   [2019]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/5] dt-bindings: display: stm32: add supply property to DSI controller
Date
This patch adds documentation of a new property phy-dsi-supply to the
STM32 DSI controller.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
---
Documentation/devicetree/bindings/display/st,stm32-ltdc.txt | 3 +++
1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
index 3eb1b48..60c54da 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
@@ -40,6 +40,8 @@ Mandatory nodes specific to STM32 DSI:
- panel or bridge node: A node containing the panel or bridge description as
documented in [6].
- port: panel or bridge port node, connected to the DSI output port (port@1).
+Optional properties:
+- phy-dsi-supply: phandle of the regulator that provides the supply voltage.

Note: You can find more documentation in the following references
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -101,6 +103,7 @@ Example 2: DSI panel
clock-names = "pclk", "ref";
resets = <&rcc STM32F4_APB2_RESET(DSI)>;
reset-names = "apb";
+ phy-dsi-supply = <&reg18>;

ports {
#address-cells = <1>;
--
2.7.4
\
 
 \ /
  Last update: 2019-05-10 16:21    [W:0.881 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site