lkml.org 
[lkml]   [2019]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL
Date
Hi Alexandre,

> This reverts commit c17e9377aa81664d94b4f2102559fcf2a01ec8e7.
>
> The lpc32xx clock driver is not able to actually change the PLL rate as
> this would require reparenting ARM_CLK, DDRAM_CLK, PERIPH_CLK to SYSCLK,
> then stop the PLL, update the register, restart the PLL and wait for the
> PLL to lock and finally reparent ARM_CLK, DDRAM_CLK, PERIPH_CLK to HCLK
> PLL.
>
> Currently, the HCLK driver simply updates the registers but this has no
> real effect and all the clock rate calculation end up being wrong. This is
> especially annoying for the peripheral (e.g. UARTs, I2C, SPI).
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>


Gregory

> ---
> arch/arm/boot/dts/lpc32xx.dtsi | 3 ---
> 1 file changed, 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
> index 20b38f4ade37..a49c97e5a38a 100644
> --- a/arch/arm/boot/dts/lpc32xx.dtsi
> +++ b/arch/arm/boot/dts/lpc32xx.dtsi
> @@ -323,9 +323,6 @@
>
> clocks = <&xtal_32k>, <&xtal>;
> clock-names = "xtal_32k", "xtal";
> -
> - assigned-clocks = <&clk LPC32XX_CLK_HCLK_PLL>;
> - assigned-clock-rates = <208000000>;
> };
> };
>
> --
> 2.21.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

\
 
 \ /
  Last update: 2019-05-10 15:17    [W:0.146 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site