lkml.org 
[lkml]   [2019]   [May]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2] arm64: dts: ls1028a: Add USB dt nodes
On Fri, Apr 26, 2019 at 05:54:26AM +0000, Ran Wang wrote:
> This patch adds USB dt nodes for LS1028A.
>
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
> ---
> Changes in v2:
> - Rename node from usb3@... to usb@... to meet DTSpec
>
> arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 20 ++++++++++++++++++++
> 1 files changed, 20 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 8dd3501..188cfb8 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -144,6 +144,26 @@
> clocks = <&sysclk>;
> };
>
> + usb0:usb@3100000 {
^ space needed

> + compatible= "snps,dwc3";

Needs an SoC specific compatible.

> + reg= <0x0 0x3100000 0x0 0x10000>;
> + interrupts= <0 80 0x4>;
> + dr_mode= "host";
> + snps,dis_rxdet_inp3_quirk;
> + snps,quirk-frame-length-adjustment = <0x20>;
> + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
> + };
> +
> + usb1:usb@3110000 {
> + compatible= "snps,dwc3";
> + reg= <0x0 0x3110000 0x0 0x10000>;
> + interrupts= <0 81 0x4>;
> + dr_mode= "host";
> + snps,dis_rxdet_inp3_quirk;
> + snps,quirk-frame-length-adjustment = <0x20>;
> + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
> + };
> +
> i2c0: i2c@2000000 {
> compatible = "fsl,vf610-i2c";
> #address-cells = <1>;
> --
> 1.7.1
>

\
 
 \ /
  Last update: 2019-05-02 01:54    [W:0.150 / U:1.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site