lkml.org 
[lkml]   [2019]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 06/11] drm/meson: Add G12A Support for the Overlay video plane
From
Date
On 09/04/2019 10:42, Jerome Brunet wrote:
> On Mon, 2019-03-25 at 15:18 +0100, Neil Armstrong wrote:
>> Amlogic G12A SoC supports the same set of Video Planes, but now
>> are handled by the new OSD plane blender module.
>>
>> This patch uses the same VD1 plane for G12A, using the exact same scaler
>> and VD11 setup registers, except using the new blender register to
>> disable the plane.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>> drivers/gpu/drm/meson/meson_overlay.c | 10 ++++++++--
>> 1 file changed, 8 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/meson/meson_overlay.c b/drivers/gpu/drm/meson/meson_overlay.c
>> index b54a22e483b9..bdbf925ff3e8 100644
>> --- a/drivers/gpu/drm/meson/meson_overlay.c
>> +++ b/drivers/gpu/drm/meson/meson_overlay.c
>> @@ -516,8 +516,14 @@ static void meson_overlay_atomic_disable(struct drm_plane *plane,
>> priv->viu.vd1_enabled = false;
>>
>> /* Disable VD1 */
>> - writel_bits_relaxed(VPP_VD1_POSTBLEND | VPP_VD1_PREBLEND, 0,
>> - priv->io_base + _REG(VPP_MISC));
>> + if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
>> + writel_relaxed(0, priv->io_base + _REG(VD1_BLEND_SRC_CTRL));
>> + writel_relaxed(0, priv->io_base + _REG(VD2_BLEND_SRC_CTRL));
>> + writel_relaxed(0, priv->io_base + _REG(VD1_IF0_GEN_REG + 0x17b0));
>> + writel_relaxed(0, priv->io_base + _REG(VD2_IF0_GEN_REG + 0x17b0));
>
> Is it possible to add a comment explaining this 0x17b0 value ?

It's the same register shift as in crtc, will add a define.

>
>> + } else
>> + writel_bits_relaxed(VPP_VD1_POSTBLEND | VPP_VD1_PREBLEND, 0,
>> + priv->io_base + _REG(VPP_MISC));
>>
>> }
>>
>
>

Will fix in a follow-up patch,

Neil

\
 
 \ /
  Last update: 2019-04-09 11:20    [W:0.144 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site