lkml.org 
[lkml]   [2019]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 04/12] arm64: dts: allwinner: orange-pi-3: Enable HDMI output
On Sat, Apr 06, 2019 at 01:45:06AM +0200, megous@megous.com wrote:
> From: Ondrej Jirman <megous@megous.com>
>
> Orange Pi 3 has a DDC_CEC_EN signal connected to PH2, that enables
> the DDC I2C bus. Before EDID can be read, we need to pull PH2 high.
>
> Signed-off-by: Ondrej Jirman <megous@megous.com>
> ---
> .../dts/allwinner/sun50i-h6-orangepi-3.dts | 35 +++++++++++++++++++
> 1 file changed, 35 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
> index 7a2424fcaed7..644946749088 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
> @@ -21,6 +21,17 @@
> stdout-path = "serial0:115200n8";
> };
>
> + connector {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_con_in: endpoint {
> + remote-endpoint = <&hdmi_out_con>;
> + };
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
>
> @@ -36,6 +47,15 @@
> };
> };
>
> + reg_ddc: ddc-io {
> + compatible = "regulator-fixed";
> + regulator-name = "ddc-io";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + enable-active-high;
> + gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
> + };
> +

This is indented with spaces and generates checkpatch warnings.

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-04-08 09:24    [W:0.274 / U:16.568 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site