lkml.org 
[lkml]   [2019]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 3/2] fdomain: Use SCSI host private data instead of global variables
Date
Move global variables into SCSI host private data in order to support
multiple cards.

Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/scsi/fdomain.c | 593 +++++++++++++++++++++++++------------------------
1 file changed, 307 insertions(+), 286 deletions(-)

diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c
index fe9e373c27a8..83294cf6b668 100644
--- a/drivers/scsi/fdomain.c
+++ b/drivers/scsi/fdomain.c
@@ -384,29 +384,32 @@ enum out_port_type {

/* .bss will zero all the static variables below */
static int port_base;
-static unsigned long bios_base;
-static void __iomem * bios_mem;
-static int bios_major;
-static int bios_minor;
-static int PCI_bus;
-#ifdef CONFIG_PCI
-static struct pci_dev *PCI_dev;
-#endif
-static int Quantum; /* Quantum board variant */
static int interrupt_level;
-static volatile int in_command;
-static struct scsi_cmnd *current_SC;
-static enum chip_type chip = unknown;
-static int adapter_mask;
static int this_id;
static int setup_called;

+struct fdomain {
+ int port_base;
+ unsigned long bios_base;
+ void __iomem *bios_mem;
+ int bios_major;
+ int bios_minor;
+ int PCI_bus;
+#ifdef CONFIG_PCI
+ struct pci_dev *PCI_dev;
+#endif
+ int Quantum; /* Quantum board variant */
+ int interrupt_level;
+ volatile int in_command;
+ struct scsi_cmnd *current_SC;
+ enum chip_type chip;
+ int adapter_mask;
+ int this_id;
#if DEBUG_RACE
-static volatile int in_interrupt_flag;
+ volatile int in_interrupt_flag;
#endif
-
-static int FIFO_Size = 0x2000; /* 8k FIFO for
- pre-tmc18c30 chips */
+ int FIFO_Size;
+};

static irqreturn_t do_fdomain_16x0_intr( int irq, void *dev_id );
/* Allow insmod parameters to be like LILO parameters. For example:
@@ -518,22 +521,22 @@ static struct signature {

static void print_banner( struct Scsi_Host *shpnt )
{
- if (!shpnt) return; /* This won't ever happen */
+ struct fdomain *fd = shost_priv(shpnt);

- if (bios_major < 0 && bios_minor < 0) {
+ if (fd->bios_major < 0 && fd->bios_minor < 0) {
printk(KERN_INFO "scsi%d: <fdomain> No BIOS; using scsi id %d\n",
shpnt->host_no, shpnt->this_id);
} else {
printk(KERN_INFO "scsi%d: <fdomain> BIOS version ", shpnt->host_no);

- if (bios_major >= 0) printk("%d.", bios_major);
+ if (fd->bios_major >= 0) printk("%d.", fd->bios_major);
else printk("?.");

- if (bios_minor >= 0) printk("%d", bios_minor);
+ if (fd->bios_minor >= 0) printk("%d", fd->bios_minor);
else printk("?.");

printk( " at 0x%lx using scsi id %d\n",
- bios_base, shpnt->this_id );
+ fd->bios_base, shpnt->this_id );
}

/* If this driver works for later FD PCI
@@ -542,11 +545,11 @@ static void print_banner( struct Scsi_Host *shpnt )
it's PCI it's a TMC-3260 - JTM */
printk(KERN_INFO "scsi%d: <fdomain> %s chip at 0x%x irq ",
shpnt->host_no,
- chip == tmc1800 ? "TMC-1800" : (chip == tmc18c50 ? "TMC-18C50" : (chip == tmc18c30 ? (PCI_bus ? "TMC-36C70 (PCI bus)" : "TMC-18C30") : "Unknown")),
- port_base);
+ fd->chip == tmc1800 ? "TMC-1800" : (fd->chip == tmc18c50 ? "TMC-18C50" : (fd->chip == tmc18c30 ? (fd->PCI_bus ? "TMC-36C70 (PCI bus)" : "TMC-18C30") : "Unknown")),
+ fd->port_base);

- if (interrupt_level)
- printk("%d", interrupt_level);
+ if (fd->interrupt_level)
+ printk("%d", fd->interrupt_level);
else
printk("<none>");

@@ -568,8 +571,7 @@ int fdomain_setup(char *str)
port_base = ints[0] >= 1 ? ints[1] : 0;
interrupt_level = ints[0] >= 2 ? ints[2] : 0;
this_id = ints[0] >= 3 ? ints[3] : 0;
-
- bios_major = bios_minor = -1; /* Use geometry for BIOS version >= 3.4 */
+
++setup_called;
return 1;
}
@@ -582,22 +584,24 @@ static void do_pause(unsigned amount) /* Pause for amount*10 milliseconds */
mdelay(10*amount);
}

-static inline void fdomain_make_bus_idle( void )
+static inline void fdomain_make_bus_idle(struct fdomain *fd)
{
- outb(0, port_base + SCSI_Cntl);
- outb(0, port_base + SCSI_Mode_Cntl);
- if (chip == tmc18c50 || chip == tmc18c30)
- outb(0x21 | PARITY_MASK, port_base + TMC_Cntl); /* Clear forced intr. */
+ outb(0, fd->port_base + SCSI_Cntl);
+ outb(0, fd->port_base + SCSI_Mode_Cntl);
+ if (fd->chip == tmc18c50 || fd->chip == tmc18c30)
+ outb(0x21 | PARITY_MASK, fd->port_base + TMC_Cntl); /* Clear forced intr. */
else
- outb(0x01 | PARITY_MASK, port_base + TMC_Cntl);
+ outb(0x01 | PARITY_MASK, fd->port_base + TMC_Cntl);
}

-static int fdomain_is_valid_port( int port )
+static int fdomain_is_valid_port(struct fdomain *fd, int port)
{
#if DEBUG_DETECT
printk( " (%x%x),",
inb( port + MSB_ID_Code ), inb( port + LSB_ID_Code ) );
#endif
+ fd->chip = unknown;
+ fd->FIFO_Size = 0x2000; /* 8k FIFO for pre-tmc18c30 chips */

/* The MCA ID is a unique id for each MCA compatible board. We
are using ISA boards, but Future Domain provides the MCA ID
@@ -608,10 +612,10 @@ static int fdomain_is_valid_port( int port )
if (inb( port + LSB_ID_Code ) != 0xe9) { /* test for 0x6127 id */
if (inb( port + LSB_ID_Code ) != 0x27) return 0;
if (inb( port + MSB_ID_Code ) != 0x61) return 0;
- chip = tmc1800;
+ fd->chip = tmc1800;
} else { /* test for 0xe960 id */
if (inb( port + MSB_ID_Code ) != 0x60) return 0;
- chip = tmc18c50;
+ fd->chip = tmc18c50;

/* Try to toggle 32-bit mode. This only
works on an 18c30 chip. (User reports
@@ -622,8 +626,8 @@ static int fdomain_is_valid_port( int port )
if ((inb( port + Configuration2 ) & 0x80) == 0x80) {
outb( 0x00, port + IO_Control );
if ((inb( port + Configuration2 ) & 0x80) == 0x00) {
- chip = tmc18c30;
- FIFO_Size = 0x800; /* 2k FIFO */
+ fd->chip = tmc18c30;
+ fd->FIFO_Size = 0x800; /* 2k FIFO */
}
}
/* If that failed, we are an 18c50. */
@@ -632,14 +636,14 @@ static int fdomain_is_valid_port( int port )
return 1;
}

-static int fdomain_test_loopback( void )
+static int fdomain_test_loopback(int port_base)
{
int i;
int result;

for (i = 0; i < 255; i++) {
- outb( i, port_base + Write_Loopback );
- result = inb( port_base + Read_Loopback );
+ outb(i, port_base + Write_Loopback);
+ result = inb(port_base + Read_Loopback);
if (i != result)
return 1;
}
@@ -662,7 +666,7 @@ static int fdomain_test_loopback( void )
configure a PCI system so that one of these IRQs will be used by the
Future Domain card. */

-static int fdomain_get_irq( int base )
+static int fdomain_get_irq(struct fdomain *fd, int base)
{
int options = inb(base + Configuration1);

@@ -675,12 +679,12 @@ static int fdomain_get_irq( int base )
boards on the PCI bus, so just assume we
have the right board. */

- if (chip != tmc18c30 && !PCI_bus && addresses[(options & 0xc0) >> 6 ] != bios_base)
+ if (fd->chip != tmc18c30 && !fd->PCI_bus && addresses[(options & 0xc0) >> 6 ] != fd->bios_base)
return 0;
return ints[(options & 0x0e) >> 1];
}

-static int fdomain_isa_detect( int *irq, int *iobase )
+static int fdomain_isa_detect(struct fdomain *fd)
{
int i, j;
int base = 0xdeadbeef;
@@ -695,18 +699,18 @@ static int fdomain_isa_detect( int *irq, int *iobase )
if (!p)
continue;
#if DEBUG_DETECT
- printk( " %lx(%lx),", addresses[i], bios_base );
+ printk( " %lx(%lx),", addresses[i], fd->bios_base );
#endif
for (j = 0; j < SIGNATURE_COUNT; j++) {
if (check_signature(p + signatures[j].sig_offset,
signatures[j].signature,
signatures[j].sig_length )) {
- bios_major = signatures[j].major_bios_version;
- bios_minor = signatures[j].minor_bios_version;
- PCI_bus = (signatures[j].flag == 1);
- Quantum = (signatures[j].flag > 1) ? signatures[j].flag : 0;
- bios_base = addresses[i];
- bios_mem = p;
+ fd->bios_major = signatures[j].major_bios_version;
+ fd->bios_minor = signatures[j].minor_bios_version;
+ fd->PCI_bus = (signatures[j].flag == 1);
+ fd->Quantum = (signatures[j].flag > 1) ? signatures[j].flag : 0;
+ fd->bios_base = addresses[i];
+ fd->bios_mem = p;
goto found;
}
}
@@ -714,7 +718,7 @@ static int fdomain_isa_detect( int *irq, int *iobase )
}

found:
- if (bios_major == 2) {
+ if (fd->bios_major == 2) {
/* The TMC-1660/TMC-1680 has a RAM area just after the BIOS ROM.
Assuming the ROM is enabled (otherwise we wouldn't have been
able to read the ROM signature :-), then the ROM sets up the
@@ -723,16 +727,16 @@ static int fdomain_isa_detect( int *irq, int *iobase )
DOS (this geometry has nothing to do with physical geometry).
*/

- switch (Quantum) {
+ switch (fd->Quantum) {
case 2: /* ISA_200S */
case 3: /* ISA_250MG */
- base = readb(bios_mem + 0x1fa2) + (readb(bios_mem + 0x1fa3) << 8);
+ base = readb(fd->bios_mem + 0x1fa2) + (readb(fd->bios_mem + 0x1fa3) << 8);
break;
case 4: /* ISA_200S (another one) */
- base = readb(bios_mem + 0x1fa3) + (readb(bios_mem + 0x1fa4) << 8);
+ base = readb(fd->bios_mem + 0x1fa3) + (readb(fd->bios_mem + 0x1fa4) << 8);
break;
default:
- base = readb(bios_mem + 0x1fcc) + (readb(bios_mem + 0x1fcd) << 8);
+ base = readb(fd->bios_mem + 0x1fcc) + (readb(fd->bios_mem + 0x1fcd) << 8);
break;
}

@@ -744,12 +748,12 @@ static int fdomain_isa_detect( int *irq, int *iobase )
if (base == ports[i]) {
if (!request_region(base, 0x10, "fdomain"))
break;
- if (!fdomain_is_valid_port(base)) {
+ if (!fdomain_is_valid_port(fd, base)) {
release_region(base, 0x10);
break;
}
- *irq = fdomain_get_irq( base );
- *iobase = base;
+ fd->interrupt_level = fdomain_get_irq(fd, base);
+ fd->port_base = base;
return 1;
}
}
@@ -783,7 +787,7 @@ static int fdomain_isa_detect( int *irq, int *iobase )
#if DEBUG_DETECT
printk( " %x,", base );
#endif
- flag = fdomain_is_valid_port(base);
+ flag = fdomain_is_valid_port(fd, base);
if (flag)
break;
release_region(base, 0x10);
@@ -796,20 +800,18 @@ static int fdomain_isa_detect( int *irq, int *iobase )

if (!flag) return 0; /* iobase not found */

- *irq = fdomain_get_irq( base );
- *iobase = base;
+ fd->interrupt_level = fdomain_get_irq(fd, base);
+ fd->port_base = base;

return 1; /* success */
}

#else /* PCMCIA */

-static int fdomain_isa_detect( int *irq, int *iobase )
+static int fdomain_isa_detect(struct fdomain *fd)
{
- if (irq)
- *irq = 0;
- if (iobase)
- *iobase = 0;
+ fd->interrupt_level = 0;
+ fd->port_base = 0;
return 0;
}

@@ -821,7 +823,7 @@ static int fdomain_isa_detect( int *irq, int *iobase )
the PCI configuration registers. */

#ifdef CONFIG_PCI
-static int fdomain_pci_bios_detect( int *irq, int *iobase, struct pci_dev **ret_pdev )
+static int fdomain_pci_bios_detect(struct fdomain *fd)
{
unsigned int pci_irq; /* PCI interrupt line */
unsigned long pci_base; /* PCI I/O base address */
@@ -863,27 +865,26 @@ static int fdomain_pci_bios_detect( int *irq, int *iobase, struct pci_dev **ret_
/* Now we have the I/O base address and interrupt from the PCI
configuration registers. */

- *irq = pci_irq;
- *iobase = pci_base;
- *ret_pdev = pdev;
+ fd->interrupt_level = pci_irq;
+ fd->port_base = pci_base;

#if DEBUG_DETECT
printk( "scsi: <fdomain> TMC-3260 detect:"
- " IRQ = %d, I/O base = 0x%x [0x%lx]\n", *irq, *iobase, pci_base );
+ " IRQ = %d, I/O base = 0x%x [0x%lx]\n", fd->interrupt_level, fd->port_base, pci_base );
#endif

- if (!fdomain_is_valid_port(pci_base)) {
+ if (!fdomain_is_valid_port(fd, pci_base)) {
printk(KERN_ERR "scsi: <fdomain> PCI card detected, but driver not loaded (invalid port)\n" );
release_region(pci_base, 0x10);
goto fail;
}

/* Fill in a few global variables. Ugh. */
- bios_major = bios_minor = -1;
- PCI_bus = 1;
- PCI_dev = pdev;
- Quantum = 0;
- bios_base = 0;
+ fd->bios_major = fd->bios_minor = -1;
+ fd->PCI_bus = 1;
+ fd->PCI_dev = pdev;
+ fd->Quantum = 0;
+ fd->bios_base = 0;

return 1;
fail:
@@ -893,12 +894,24 @@ static int fdomain_pci_bios_detect( int *irq, int *iobase, struct pci_dev **ret_

#endif

+void fdomain_16x0_reset(int port_base)
+{
+ outb(1, port_base + SCSI_Cntl);
+ do_pause( 2 );
+ outb(0, port_base + SCSI_Cntl);
+ do_pause( 115 );
+ outb(0, port_base + SCSI_Mode_Cntl);
+ outb(PARITY_MASK, port_base + TMC_Cntl);
+}
+
struct Scsi_Host *__fdomain_16x0_detect(struct scsi_host_template *tpnt )
{
int retcode;
struct Scsi_Host *shpnt;
- struct pci_dev *pdev = NULL;
+ struct fdomain fd_tmp;
+ struct fdomain *fd;

+ memset(&fd_tmp, 0, sizeof(struct fdomain));
if (setup_called) {
#if DEBUG_DETECT
printk( "scsi: <fdomain> No BIOS, using port_base = 0x%x, irq = %d\n",
@@ -909,23 +922,27 @@ struct Scsi_Host *__fdomain_16x0_detect(struct scsi_host_template *tpnt )
printk( "scsi: <fdomain> Bad LILO/INSMOD parameters?\n" );
return NULL;
}
- if (!fdomain_is_valid_port( port_base )) {
+ if (!fdomain_is_valid_port(&fd_tmp, port_base)) {
printk( "scsi: <fdomain> Cannot locate chip at port base 0x%x\n",
port_base );
printk( "scsi: <fdomain> Bad LILO/INSMOD parameters?\n" );
release_region(port_base, 0x10);
return NULL;
}
+ fd_tmp.port_base = port_base;
+ fd_tmp.interrupt_level = interrupt_level;
+ fd_tmp.this_id = this_id;
+ fd_tmp.bios_major = fd_tmp.bios_minor = -1; /* Use geometry for BIOS version >= 3.4 */
} else {
int flag = 0;

#ifdef CONFIG_PCI
/* Try PCI detection first */
- flag = fdomain_pci_bios_detect( &interrupt_level, &port_base, &pdev );
+ flag = fdomain_pci_bios_detect(&fd_tmp);
#endif
if (!flag) {
/* Then try ISA bus detection */
- flag = fdomain_isa_detect( &interrupt_level, &port_base );
+ flag = fdomain_isa_detect(&fd_tmp);

if (!flag) {
printk( "scsi: <fdomain> Detection failed (no card)\n" );
@@ -934,62 +951,64 @@ struct Scsi_Host *__fdomain_16x0_detect(struct scsi_host_template *tpnt )
}
}

- fdomain_16x0_host_reset(NULL);
+ fdomain_16x0_reset(fd_tmp.port_base);

- if (fdomain_test_loopback()) {
- printk(KERN_ERR "scsi: <fdomain> Detection failed (loopback test failed at port base 0x%x)\n", port_base);
+ if (fdomain_test_loopback(fd_tmp.port_base)) {
+ printk(KERN_ERR "scsi: <fdomain> Detection failed (loopback test failed at port base 0x%x)\n", fd_tmp.port_base);
if (setup_called) {
printk(KERN_ERR "scsi: <fdomain> Bad LILO/INSMOD parameters?\n");
}
goto fail;
}

- if (this_id) {
- tpnt->this_id = (this_id & 0x07);
- adapter_mask = (1 << tpnt->this_id);
+ if (fd_tmp.this_id) {
+ tpnt->this_id = (fd_tmp.this_id & 0x07);
+ fd_tmp.adapter_mask = (1 << tpnt->this_id);
} else {
- if (PCI_bus || (bios_major == 3 && bios_minor >= 2) || bios_major < 0) {
+ if (fd_tmp.PCI_bus || (fd_tmp.bios_major == 3 && fd_tmp.bios_minor >= 2) || fd_tmp.bios_major < 0) {
tpnt->this_id = 7;
- adapter_mask = 0x80;
+ fd_tmp.adapter_mask = 0x80;
} else {
tpnt->this_id = 6;
- adapter_mask = 0x40;
+ fd_tmp.adapter_mask = 0x40;
}
}

/* Print out a banner here in case we can't
get resources. */

- shpnt = scsi_host_alloc( tpnt, 0 );
+ shpnt = scsi_host_alloc(tpnt, sizeof(struct fdomain));
if(shpnt == NULL) {
- release_region(port_base, 0x10);
+ release_region(fd_tmp.port_base, 0x10);
return NULL;
}
- shpnt->irq = interrupt_level;
- shpnt->io_port = port_base;
+ fd = shost_priv(shpnt);
+ memcpy(fd, &fd_tmp, sizeof(struct fdomain));
+ shpnt->irq = fd->interrupt_level;
+ shpnt->io_port = fd->port_base;
shpnt->n_io_port = 0x10;
print_banner( shpnt );

/* Log IRQ with kernel */
- if (!interrupt_level) {
+ if (!fd->interrupt_level) {
printk(KERN_ERR "scsi: <fdomain> Card Detected, but driver not loaded (no IRQ)\n" );
goto fail;
} else {
/* Register the IRQ with the kernel */

- retcode = request_irq( interrupt_level,
- do_fdomain_16x0_intr, pdev?IRQF_SHARED:0, "fdomain", shpnt);
+ retcode = request_irq(fd->interrupt_level,
+ do_fdomain_16x0_intr, fd->PCI_dev?IRQF_SHARED:0, "fdomain", fd);

if (retcode < 0) {
if (retcode == -EINVAL) {
- printk(KERN_ERR "scsi: <fdomain> IRQ %d is bad!\n", interrupt_level );
+ printk(KERN_ERR "scsi: <fdomain> IRQ %d is bad!\n", fd->interrupt_level);
printk(KERN_ERR " This shouldn't happen!\n" );
printk(KERN_ERR " Send mail to faith@acm.org\n" );
} else if (retcode == -EBUSY) {
- printk(KERN_ERR "scsi: <fdomain> IRQ %d is already in use!\n", interrupt_level );
+ printk(KERN_ERR "scsi: <fdomain> IRQ %d is already in use!\n", fd->interrupt_level);
printk(KERN_ERR " Please use another IRQ!\n" );
} else {
- printk(KERN_ERR "scsi: <fdomain> Error getting IRQ %d\n", interrupt_level );
+ printk(KERN_ERR "scsi: <fdomain> Error getting IRQ %d\n", fd->interrupt_level);
printk(KERN_ERR " This shouldn't happen!\n" );
printk(KERN_ERR " Send mail to faith@acm.org\n" );
}
@@ -999,8 +1018,8 @@ struct Scsi_Host *__fdomain_16x0_detect(struct scsi_host_template *tpnt )
}
return shpnt;
fail:
- pci_dev_put(pdev);
- release_region(port_base, 0x10);
+ pci_dev_put(fd->PCI_dev);
+ release_region(fd->port_base, 0x10);
return NULL;
}

@@ -1036,7 +1055,7 @@ static int fdomain_arbitrate( void )
#endif

outb(0x00, port_base + SCSI_Cntl); /* Disable data drivers */
- outb(adapter_mask, port_base + SCSI_Data_NoACK); /* Set our id bit */
+ outb(fd->adapter_mask, port_base + SCSI_Data_NoACK); /* Set our id bit */
outb(0x04 | PARITY_MASK, port_base + TMC_Cntl); /* Start arbitration */

timeout = 500;
@@ -1048,7 +1067,7 @@ static int fdomain_arbitrate( void )
} while (--timeout);

/* Make bus idle */
- fdomain_make_bus_idle();
+ fdomain_make_bus_idle(fd);

#if EVERY_ACCESS
printk( "Arbitration failed, status = %x\n", status );
@@ -1060,7 +1079,7 @@ static int fdomain_arbitrate( void )
}
#endif

-static int fdomain_select( int target )
+static int fdomain_select(struct fdomain *fd, int target)
{
int status;
unsigned long timeout;
@@ -1068,25 +1087,25 @@ static int fdomain_select( int target )
static int flag = 0;
#endif

- outb(0x82, port_base + SCSI_Cntl); /* Bus Enable + Select */
- outb(adapter_mask | (1 << target), port_base + SCSI_Data_NoACK);
+ outb(0x82, fd->port_base + SCSI_Cntl); /* Bus Enable + Select */
+ outb(fd->adapter_mask | (1 << target), fd->port_base + SCSI_Data_NoACK);

/* Stop arbitration and enable parity */
- outb(PARITY_MASK, port_base + TMC_Cntl);
+ outb(PARITY_MASK, fd->port_base + TMC_Cntl);

timeout = 350; /* 350 msec */

do {
- status = inb(port_base + SCSI_Status); /* Read adapter status */
+ status = inb(fd->port_base + SCSI_Status); /* Read adapter status */
if (status & 1) { /* Busy asserted */
/* Enable SCSI Bus (on error, should make bus idle with 0) */
- outb(0x80, port_base + SCSI_Cntl);
+ outb(0x80,fd-> port_base + SCSI_Cntl);
return 0;
}
mdelay(1); /* wait one msec */
} while (--timeout);
/* Make bus idle */
- fdomain_make_bus_idle();
+ fdomain_make_bus_idle(fd);
#if EVERY_ACCESS
if (!target) printk( "Selection failed\n" );
#endif
@@ -1101,26 +1120,27 @@ static int fdomain_select( int target )
return 1;
}

-static void my_done(int error)
+static void my_done(struct fdomain *fd, int error)
{
- if (in_command) {
- in_command = 0;
- outb(0x00, port_base + Interrupt_Cntl);
- fdomain_make_bus_idle();
- current_SC->result = error;
- if (current_SC->scsi_done)
- current_SC->scsi_done( current_SC );
+ if (fd->in_command) {
+ fd->in_command = 0;
+ outb(0x00, fd->port_base + Interrupt_Cntl);
+ fdomain_make_bus_idle(fd);
+ fd->current_SC->result = error;
+ if (fd->current_SC->scsi_done)
+ fd->current_SC->scsi_done(fd->current_SC);
else panic( "scsi: <fdomain> current_SC->scsi_done() == NULL" );
} else {
panic( "scsi: <fdomain> my_done() called outside of command\n" );
}
#if DEBUG_RACE
- in_interrupt_flag = 0;
+ fd->in_interrupt_flag = 0;
#endif
}

static irqreturn_t do_fdomain_16x0_intr(int irq, void *dev_id)
{
+ struct fdomain *fd = dev_id;
unsigned long flags;
int status;
int done = 0;
@@ -1133,23 +1153,23 @@ static irqreturn_t do_fdomain_16x0_intr(int irq, void *dev_id)
running. */

/* Check for other IRQ sources */
- if ((inb(port_base + TMC_Status) & 0x01) == 0)
+ if ((inb(fd->port_base + TMC_Status) & 0x01) == 0)
return IRQ_NONE;

/* It is our IRQ */
- outb(0x00, port_base + Interrupt_Cntl);
+ outb(0x00, fd->port_base + Interrupt_Cntl);

/* We usually have one spurious interrupt after each command. Ignore it. */
- if (!in_command || !current_SC) { /* Spurious interrupt */
+ if (!fd->in_command || !fd->current_SC) { /* Spurious interrupt */
#if EVERY_ACCESS
printk( "Spurious interrupt, in_command = %d, current_SC = %x\n",
- in_command, current_SC );
+ fd->in_command, fd->current_SC);
#endif
return IRQ_NONE;
}

/* Abort calls my_done, so we do nothing here. */
- if (current_SC->SCp.phase & aborted) {
+ if (fd->current_SC->SCp.phase & aborted) {
#if DEBUG_ABORT
printk( "scsi: <fdomain> Interrupt after abort, ignoring\n" );
#endif
@@ -1158,212 +1178,212 @@ static irqreturn_t do_fdomain_16x0_intr(int irq, void *dev_id)
}

#if DEBUG_RACE
- ++in_interrupt_flag;
+ ++fd->in_interrupt_flag;
#endif

- if (current_SC->SCp.phase & in_arbitration) {
- status = inb(port_base + TMC_Status); /* Read adapter status */
+ if (fd->current_SC->SCp.phase & in_arbitration) {
+ status = inb(fd->port_base + TMC_Status); /* Read adapter status */
if (!(status & 0x02)) {
#if EVERY_ACCESS
printk( " AFAIL " );
#endif
- spin_lock_irqsave(current_SC->device->host->host_lock, flags);
- my_done( DID_BUS_BUSY << 16 );
- spin_unlock_irqrestore(current_SC->device->host->host_lock, flags);
+ spin_lock_irqsave(fd->current_SC->device->host->host_lock, flags);
+ my_done(fd, DID_BUS_BUSY << 16);
+ spin_unlock_irqrestore(fd->current_SC->device->host->host_lock, flags);
return IRQ_HANDLED;
}
- current_SC->SCp.phase = in_selection;
+ fd->current_SC->SCp.phase = in_selection;

- outb(0x40 | FIFO_COUNT, port_base + Interrupt_Cntl);
+ outb(0x40 | FIFO_COUNT, fd->port_base + Interrupt_Cntl);

- outb(0x82, port_base + SCSI_Cntl); /* Bus Enable + Select */
- outb(adapter_mask | (1 << scmd_id(current_SC)), port_base + SCSI_Data_NoACK);
+ outb(0x82, fd->port_base + SCSI_Cntl); /* Bus Enable + Select */
+ outb(fd->adapter_mask | (1 << scmd_id(fd->current_SC)), fd->port_base + SCSI_Data_NoACK);

/* Stop arbitration and enable parity */
- outb(0x10 | PARITY_MASK, port_base + TMC_Cntl);
+ outb(0x10 | PARITY_MASK, fd->port_base + TMC_Cntl);
#if DEBUG_RACE
- in_interrupt_flag = 0;
+ fd->in_interrupt_flag = 0;
#endif
return IRQ_HANDLED;
- } else if (current_SC->SCp.phase & in_selection) {
- status = inb(port_base + SCSI_Status);
+ } else if (fd->current_SC->SCp.phase & in_selection) {
+ status = inb(fd->port_base + SCSI_Status);
if (!(status & 0x01)) {
/* Try again, for slow devices */
- if (fdomain_select( scmd_id(current_SC) )) {
+ if (fdomain_select(fd,scmd_id(fd->current_SC))) {
#if EVERY_ACCESS
printk( " SFAIL " );
#endif
- spin_lock_irqsave(current_SC->device->host->host_lock, flags);
- my_done( DID_NO_CONNECT << 16 );
- spin_unlock_irqrestore(current_SC->device->host->host_lock, flags);
+ spin_lock_irqsave(fd->current_SC->device->host->host_lock, flags);
+ my_done(fd, DID_NO_CONNECT << 16);
+ spin_unlock_irqrestore(fd->current_SC->device->host->host_lock, flags);
return IRQ_HANDLED;
} else {
#if EVERY_ACCESS
printk( " AltSel " );
#endif
/* Stop arbitration and enable parity */
- outb(0x10 | PARITY_MASK, port_base + TMC_Cntl);
+ outb(0x10 | PARITY_MASK, fd->port_base + TMC_Cntl);
}
}
- current_SC->SCp.phase = in_other;
- outb(0x90 | FIFO_COUNT, port_base + Interrupt_Cntl);
- outb(0x80, port_base + SCSI_Cntl);
+ fd->current_SC->SCp.phase = in_other;
+ outb(0x90 | FIFO_COUNT, fd->port_base + Interrupt_Cntl);
+ outb(0x80, fd->port_base + SCSI_Cntl);
#if DEBUG_RACE
- in_interrupt_flag = 0;
+ fd->in_interrupt_flag = 0;
#endif
return IRQ_HANDLED;
}

/* current_SC->SCp.phase == in_other: this is the body of the routine */

- status = inb(port_base + SCSI_Status);
+ status = inb(fd->port_base + SCSI_Status);

if (status & 0x10) { /* REQ */

switch (status & 0x0e) {

case 0x08: /* COMMAND OUT */
- outb(current_SC->cmnd[current_SC->SCp.sent_command++],
- port_base + Write_SCSI_Data);
+ outb(fd->current_SC->cmnd[fd->current_SC->SCp.sent_command++],
+ fd->port_base + Write_SCSI_Data);
#if EVERY_ACCESS
printk( "CMD = %x,",
- current_SC->cmnd[ current_SC->SCp.sent_command - 1] );
+ fd->current_SC->cmnd[fd->current_SC->SCp.sent_command - 1]);
#endif
break;
case 0x00: /* DATA OUT -- tmc18c50/tmc18c30 only */
- if (chip != tmc1800 && !current_SC->SCp.have_data_in) {
- current_SC->SCp.have_data_in = -1;
- outb(0xd0 | PARITY_MASK, port_base + TMC_Cntl);
+ if (fd->chip != tmc1800 && !fd->current_SC->SCp.have_data_in) {
+ fd->current_SC->SCp.have_data_in = -1;
+ outb(0xd0 | PARITY_MASK, fd->port_base + TMC_Cntl);
}
break;
case 0x04: /* DATA IN -- tmc18c50/tmc18c30 only */
- if (chip != tmc1800 && !current_SC->SCp.have_data_in) {
- current_SC->SCp.have_data_in = 1;
- outb(0x90 | PARITY_MASK, port_base + TMC_Cntl);
+ if (fd->chip != tmc1800 && !fd->current_SC->SCp.have_data_in) {
+ fd->current_SC->SCp.have_data_in = 1;
+ outb(0x90 | PARITY_MASK, fd->port_base + TMC_Cntl);
}
break;
case 0x0c: /* STATUS IN */
- current_SC->SCp.Status = inb(port_base + Read_SCSI_Data);
+ fd->current_SC->SCp.Status = inb(fd->port_base + Read_SCSI_Data);
#if EVERY_ACCESS
- printk( "Status = %x, ", current_SC->SCp.Status );
+ printk( "Status = %x, ", fd->current_SC->SCp.Status );
#endif
#if ERRORS_ONLY
- if (current_SC->SCp.Status
- && current_SC->SCp.Status != 2
- && current_SC->SCp.Status != 8) {
+ if (fd->current_SC->SCp.Status
+ && fd->current_SC->SCp.Status != 2
+ && fd->current_SC->SCp.Status != 8) {
printk( "scsi: <fdomain> target = %d, command = %x, status = %x\n",
- current_SC->device->id,
- current_SC->cmnd[0],
- current_SC->SCp.Status );
+ fd->current_SC->device->id,
+ fd->current_SC->cmnd[0],
+ fd->current_SC->SCp.Status );
}
#endif
break;
case 0x0a: /* MESSAGE OUT */
- outb(MESSAGE_REJECT, port_base + Write_SCSI_Data); /* Reject */
+ outb(MESSAGE_REJECT, fd->port_base + Write_SCSI_Data); /* Reject */
break;
case 0x0e: /* MESSAGE IN */
- current_SC->SCp.Message = inb(port_base + Read_SCSI_Data);
+ fd->current_SC->SCp.Message = inb(fd->port_base + Read_SCSI_Data);
#if EVERY_ACCESS
- printk( "Message = %x, ", current_SC->SCp.Message );
+ printk( "Message = %x, ", fd->current_SC->SCp.Message );
#endif
- if (!current_SC->SCp.Message) ++done;
+ if (!fd->current_SC->SCp.Message) ++done;
#if DEBUG_MESSAGES || EVERY_ACCESS
- if (current_SC->SCp.Message) {
+ if (fd->current_SC->SCp.Message) {
printk( "scsi: <fdomain> message = %x\n",
- current_SC->SCp.Message );
+ fd->current_SC->SCp.Message );
}
#endif
break;
}
}

- if (chip == tmc1800 && !current_SC->SCp.have_data_in
- && (current_SC->SCp.sent_command >= current_SC->cmd_len)) {
+ if (fd->chip == tmc1800 && !fd->current_SC->SCp.have_data_in
+ && (fd->current_SC->SCp.sent_command >= fd->current_SC->cmd_len)) {

- if(current_SC->sc_data_direction == DMA_TO_DEVICE)
+ if (fd->current_SC->sc_data_direction == DMA_TO_DEVICE)
{
- current_SC->SCp.have_data_in = -1;
- outb(0xd0 | PARITY_MASK, port_base + TMC_Cntl);
+ fd->current_SC->SCp.have_data_in = -1;
+ outb(0xd0 | PARITY_MASK, fd->port_base + TMC_Cntl);
}
else
{
- current_SC->SCp.have_data_in = 1;
- outb(0x90 | PARITY_MASK, port_base + TMC_Cntl);
+ fd->current_SC->SCp.have_data_in = 1;
+ outb(0x90 | PARITY_MASK, fd->port_base + TMC_Cntl);
}
}

- if (current_SC->SCp.have_data_in == -1) { /* DATA OUT */
- while ((data_count = FIFO_Size - inw(port_base + FIFO_Data_Count)) > 512) {
+ if (fd->current_SC->SCp.have_data_in == -1) { /* DATA OUT */
+ while ((data_count = fd->FIFO_Size - inw(fd->port_base + FIFO_Data_Count)) > 512) {
#if EVERY_ACCESS
printk( "DC=%d, ", data_count ) ;
#endif
- if (data_count > current_SC->SCp.this_residual)
- data_count = current_SC->SCp.this_residual;
+ if (data_count > fd->current_SC->SCp.this_residual)
+ data_count = fd->current_SC->SCp.this_residual;
if (data_count > 0) {
#if EVERY_ACCESS
printk( "%d OUT, ", data_count );
#endif
if (data_count == 1) {
- outb(*current_SC->SCp.ptr++, port_base + Write_FIFO);
- --current_SC->SCp.this_residual;
+ outb(*fd->current_SC->SCp.ptr++, fd->port_base + Write_FIFO);
+ --fd->current_SC->SCp.this_residual;
} else {
data_count >>= 1;
- outsw(port_base + Write_FIFO, current_SC->SCp.ptr, data_count);
- current_SC->SCp.ptr += 2 * data_count;
- current_SC->SCp.this_residual -= 2 * data_count;
+ outsw(fd->port_base + Write_FIFO, fd->current_SC->SCp.ptr, data_count);
+ fd->current_SC->SCp.ptr += 2 * data_count;
+ fd->current_SC->SCp.this_residual -= 2 * data_count;
}
}
- if (!current_SC->SCp.this_residual) {
- if (current_SC->SCp.buffers_residual) {
- --current_SC->SCp.buffers_residual;
- ++current_SC->SCp.buffer;
- current_SC->SCp.ptr = sg_virt(current_SC->SCp.buffer);
- current_SC->SCp.this_residual = current_SC->SCp.buffer->length;
+ if (!fd->current_SC->SCp.this_residual) {
+ if (fd->current_SC->SCp.buffers_residual) {
+ --fd->current_SC->SCp.buffers_residual;
+ ++fd->current_SC->SCp.buffer;
+ fd->current_SC->SCp.ptr = sg_virt(fd->current_SC->SCp.buffer);
+ fd->current_SC->SCp.this_residual = fd->current_SC->SCp.buffer->length;
} else
break;
}
}
}

- if (current_SC->SCp.have_data_in == 1) { /* DATA IN */
- while ((data_count = inw(port_base + FIFO_Data_Count)) > 0) {
+ if (fd->current_SC->SCp.have_data_in == 1) { /* DATA IN */
+ while ((data_count = inw(fd->port_base + FIFO_Data_Count)) > 0) {
#if EVERY_ACCESS
printk( "DC=%d, ", data_count );
#endif
- if (data_count > current_SC->SCp.this_residual)
- data_count = current_SC->SCp.this_residual;
+ if (data_count > fd->current_SC->SCp.this_residual)
+ data_count = fd->current_SC->SCp.this_residual;
if (data_count) {
#if EVERY_ACCESS
printk( "%d IN, ", data_count );
#endif
if (data_count == 1) {
- *current_SC->SCp.ptr++ = inb(port_base + Read_FIFO);
- --current_SC->SCp.this_residual;
+ *fd->current_SC->SCp.ptr++ = inb(fd->port_base + Read_FIFO);
+ --fd->current_SC->SCp.this_residual;
} else {
data_count >>= 1; /* Number of words */
- insw(port_base + Read_FIFO, current_SC->SCp.ptr, data_count);
- current_SC->SCp.ptr += 2 * data_count;
- current_SC->SCp.this_residual -= 2 * data_count;
+ insw(fd->port_base + Read_FIFO, fd->current_SC->SCp.ptr, data_count);
+ fd->current_SC->SCp.ptr += 2 * data_count;
+ fd->current_SC->SCp.this_residual -= 2 * data_count;
}
}
- if (!current_SC->SCp.this_residual
- && current_SC->SCp.buffers_residual) {
- --current_SC->SCp.buffers_residual;
- ++current_SC->SCp.buffer;
- current_SC->SCp.ptr = sg_virt(current_SC->SCp.buffer);
- current_SC->SCp.this_residual = current_SC->SCp.buffer->length;
+ if (!fd->current_SC->SCp.this_residual
+ && fd->current_SC->SCp.buffers_residual) {
+ --fd->current_SC->SCp.buffers_residual;
+ ++fd->current_SC->SCp.buffer;
+ fd->current_SC->SCp.ptr = sg_virt(fd->current_SC->SCp.buffer);
+ fd->current_SC->SCp.this_residual = fd->current_SC->SCp.buffer->length;
}
}
}

if (done) {
#if EVERY_ACCESS
- printk( " ** IN DONE %d ** ", current_SC->SCp.have_data_in );
+ printk( " ** IN DONE %d ** ", fd->current_SC->SCp.have_data_in );
#endif

#if ERRORS_ONLY
- if (current_SC->cmnd[0] == REQUEST_SENSE && !current_SC->SCp.Status) {
- char *buf = scsi_sglist(current_SC);
+ if (fd->current_SC->cmnd[0] == REQUEST_SENSE && !fd->current_SC->SCp.Status) {
+ char *buf = scsi_sglist(fd->current_SC);
if ((unsigned char)(*(buf + 2)) & 0x0f) {
unsigned char key;
unsigned char code;
@@ -1390,24 +1410,24 @@ static irqreturn_t do_fdomain_16x0_intr(int irq, void *dev_id)
#if EVERY_ACCESS
printk( "BEFORE MY_DONE. . ." );
#endif
- spin_lock_irqsave(current_SC->device->host->host_lock, flags);
- my_done( (current_SC->SCp.Status & 0xff)
- | ((current_SC->SCp.Message & 0xff) << 8) | (DID_OK << 16) );
- spin_unlock_irqrestore(current_SC->device->host->host_lock, flags);
+ spin_lock_irqsave(fd->current_SC->device->host->host_lock, flags);
+ my_done(fd, (fd->current_SC->SCp.Status & 0xff)
+ | ((fd->current_SC->SCp.Message & 0xff) << 8) | (DID_OK << 16) );
+ spin_unlock_irqrestore(fd->current_SC->device->host->host_lock, flags);
#if EVERY_ACCESS
printk( "RETURNING.\n" );
#endif

} else {
- if (current_SC->SCp.phase & disconnect) {
- outb(0xd0 | FIFO_COUNT, port_base + Interrupt_Cntl);
- outb(0x00, port_base + SCSI_Cntl);
+ if (fd->current_SC->SCp.phase & disconnect) {
+ outb(0xd0 | FIFO_COUNT, fd->port_base + Interrupt_Cntl);
+ outb(0x00, fd->port_base + SCSI_Cntl);
} else {
- outb(0x90 | FIFO_COUNT, port_base + Interrupt_Cntl);
+ outb(0x90 | FIFO_COUNT, fd->port_base + Interrupt_Cntl);
}
}
#if DEBUG_RACE
- in_interrupt_flag = 0;
+ fd->in_interrupt_flag = 0;
#endif
return IRQ_HANDLED;
}
@@ -1415,7 +1435,9 @@ static irqreturn_t do_fdomain_16x0_intr(int irq, void *dev_id)
static int fdomain_16x0_queue_lck(struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
{
- if (in_command) {
+ struct fdomain *fd = shost_priv(SCpnt->device->host);
+
+ if (fd->in_command) {
panic( "scsi: <fdomain> fdomain_16x0_queue() NOT REENTRANT!\n" );
}
#if EVERY_ACCESS
@@ -1426,38 +1448,38 @@ static int fdomain_16x0_queue_lck(struct scsi_cmnd *SCpnt,
scsi_bufflen(SCpnt));
#endif

- fdomain_make_bus_idle();
+ fdomain_make_bus_idle(fd);

- current_SC = SCpnt; /* Save this for the done function */
- current_SC->scsi_done = done;
+ fd->current_SC = SCpnt; /* Save this for the done function */
+ fd->current_SC->scsi_done = done;

/* Initialize static data */

- if (scsi_sg_count(current_SC)) {
- current_SC->SCp.buffer = scsi_sglist(current_SC);
- current_SC->SCp.ptr = sg_virt(current_SC->SCp.buffer);
- current_SC->SCp.this_residual = current_SC->SCp.buffer->length;
- current_SC->SCp.buffers_residual = scsi_sg_count(current_SC) - 1;
+ if (scsi_sg_count(fd->current_SC)) {
+ fd->current_SC->SCp.buffer = scsi_sglist(fd->current_SC);
+ fd->current_SC->SCp.ptr = sg_virt(fd->current_SC->SCp.buffer);
+ fd->current_SC->SCp.this_residual = fd->current_SC->SCp.buffer->length;
+ fd->current_SC->SCp.buffers_residual = scsi_sg_count(fd->current_SC) - 1;
} else {
- current_SC->SCp.ptr = NULL;
- current_SC->SCp.this_residual = 0;
- current_SC->SCp.buffer = NULL;
- current_SC->SCp.buffers_residual = 0;
+ fd->current_SC->SCp.ptr = NULL;
+ fd->current_SC->SCp.this_residual = 0;
+ fd->current_SC->SCp.buffer = NULL;
+ fd->current_SC->SCp.buffers_residual = 0;
}

- current_SC->SCp.Status = 0;
- current_SC->SCp.Message = 0;
- current_SC->SCp.have_data_in = 0;
- current_SC->SCp.sent_command = 0;
- current_SC->SCp.phase = in_arbitration;
+ fd->current_SC->SCp.Status = 0;
+ fd->current_SC->SCp.Message = 0;
+ fd->current_SC->SCp.have_data_in = 0;
+ fd->current_SC->SCp.sent_command = 0;
+ fd->current_SC->SCp.phase = in_arbitration;

/* Start arbitration */
- outb(0x00, port_base + Interrupt_Cntl);
- outb(0x00, port_base + SCSI_Cntl); /* Disable data drivers */
- outb(adapter_mask, port_base + SCSI_Data_NoACK); /* Set our id bit */
- ++in_command;
- outb(0x20, port_base + Interrupt_Cntl);
- outb(0x14 | PARITY_MASK, port_base + TMC_Cntl); /* Start arbitration */
+ outb(0x00, fd->port_base + Interrupt_Cntl);
+ outb(0x00, fd->port_base + SCSI_Cntl); /* Disable data drivers */
+ outb(fd->adapter_mask, fd->port_base + SCSI_Data_NoACK); /* Set our id bit */
+ ++fd->in_command;
+ outb(0x20, fd->port_base + Interrupt_Cntl);
+ outb(0x14 | PARITY_MASK, fd->port_base + TMC_Cntl); /* Start arbitration */

return 0;
}
@@ -1470,18 +1492,20 @@ static void print_info(struct scsi_cmnd *SCpnt)
unsigned int imr;
unsigned int irr;
unsigned int isr;
+ struct fdomain *fd;

if (!SCpnt || !SCpnt->device || !SCpnt->device->host) {
printk(KERN_WARNING "scsi: <fdomain> Cannot provide detailed information\n");
return;
}
+ fd = shost_priv(SCpnt->device->host);

printk(KERN_INFO "%s\n", fdomain_16x0_info( SCpnt->device->host ) );
print_banner(SCpnt->device->host);
switch (SCpnt->SCp.phase) {
- case in_arbitration: printk("arbitration"); break;
- case in_selection: printk("selection"); break;
- case in_other: printk("other"); break;
+ case fd->in_arbitration: printk("arbitration"); break;
+ case fd->in_selection: printk("selection"); break;
+ case fd->in_other: printk("other"); break;
default: printk("unknown"); break;
}

@@ -1496,7 +1520,7 @@ static void print_info(struct scsi_cmnd *SCpnt)
SCpnt->SCp.have_data_in,
SCpnt->timeout );
#if DEBUG_RACE
- printk( "in_interrupt_flag = %d\n", in_interrupt_flag );
+ printk( "in_interrupt_flag = %d\n", fd->in_interrupt_flag );
#endif

imr = (inb( 0x0a1 ) << 8) + inb( 0x21 );
@@ -1511,38 +1535,39 @@ static void print_info(struct scsi_cmnd *SCpnt)

/* Print out interesting information */
printk( "IMR = 0x%04x", imr );
- if (imr & (1 << interrupt_level))
+ if (imr & (1 << fd->interrupt_level))
printk( " (masked)" );
printk( ", IRR = 0x%04x, ISR = 0x%04x\n", irr, isr );

- printk( "SCSI Status = 0x%02x\n", inb(port_base + SCSI_Status));
- printk( "TMC Status = 0x%02x", inb(port_base + TMC_Status));
- if (inb((port_base + TMC_Status) & 1))
+ printk( "SCSI Status = 0x%02x\n", inb(fd->port_base + SCSI_Status));
+ printk( "TMC Status = 0x%02x", inb(fd->port_base + TMC_Status));
+ if (inb((fd->port_base + TMC_Status) & 1))
printk( " (interrupt)" );
printk( "\n" );
- printk("Interrupt Status = 0x%02x", inb(port_base + Interrupt_Status));
- if (inb(port_base + Interrupt_Status) & 0x08)
+ printk("Interrupt Status = 0x%02x", inb(fd->port_base + Interrupt_Status));
+ if (inb(fd->port_base + Interrupt_Status) & 0x08)
printk( " (enabled)" );
printk( "\n" );
- if (chip == tmc18c50 || chip == tmc18c30) {
- printk("FIFO Status = 0x%02x\n", inb(port_base + FIFO_Status));
+ if (fd->chip == tmc18c50 || fd->chip == tmc18c30) {
+ printk("FIFO Status = 0x%02x\n", inb(fd->port_base + FIFO_Status));
printk( "Int. Condition = 0x%02x\n",
- inb( port_base + Interrupt_Cond ) );
+ inb(fd->port_base + Interrupt_Cond));
}
- printk( "Configuration 1 = 0x%02x\n", inb( port_base + Configuration1 ) );
- if (chip == tmc18c50 || chip == tmc18c30)
+ printk("Configuration 1 = 0x%02x\n", inb(fd->port_base + Configuration1));
+ if (fd->chip == tmc18c50 || fd->chip == tmc18c30)
printk( "Configuration 2 = 0x%02x\n",
- inb( port_base + Configuration2 ) );
+ inb(fd->port_base + Configuration2));
}
#endif

static int fdomain_16x0_abort(struct scsi_cmnd *SCpnt)
{
+ struct fdomain *fd = shost_priv(SCpnt->device->host);
#if EVERY_ACCESS || ERRORS_ONLY || DEBUG_ABORT
printk( "scsi: <fdomain> abort " );
#endif

- if (!in_command) {
+ if (!fd->in_command) {
#if EVERY_ACCESS || ERRORS_ONLY
printk( " (not in command)\n" );
#endif
@@ -1553,28 +1578,22 @@ static int fdomain_16x0_abort(struct scsi_cmnd *SCpnt)
print_info( SCpnt );
#endif

- fdomain_make_bus_idle();
- current_SC->SCp.phase |= aborted;
- current_SC->result = DID_ABORT << 16;
+ fdomain_make_bus_idle(fd);
+ fd->current_SC->SCp.phase |= aborted;
+ fd->current_SC->result = DID_ABORT << 16;

/* Aborts are not done well. . . */
- my_done(DID_ABORT << 16);
+ my_done(fd, DID_ABORT << 16);
return SUCCESS;
}

int fdomain_16x0_host_reset(struct scsi_cmnd *SCpnt)
{
+ struct fdomain *fd = shost_priv(SCpnt->device->host);
unsigned long flags;

local_irq_save(flags);
-
- outb(1, port_base + SCSI_Cntl);
- do_pause( 2 );
- outb(0, port_base + SCSI_Cntl);
- do_pause( 115 );
- outb(0, port_base + SCSI_Mode_Cntl);
- outb(PARITY_MASK, port_base + TMC_Cntl);
-
+ fdomain_16x0_reset(fd->port_base);
local_irq_restore(flags);
return SUCCESS;
}
@@ -1591,6 +1610,7 @@ static int fdomain_16x0_biosparam(struct scsi_device *sdev,
unsigned char heads;
unsigned char sectors;
} i;
+ struct fdomain *fd = shost_priv(sdev->host);

/* NOTES:
The RAM area starts at 0x1f00 from the bios_base address.
@@ -1641,8 +1661,8 @@ static int fdomain_16x0_biosparam(struct scsi_device *sdev,
}
drive = MINOR(bdev->bd_dev) >> 4;

- if (bios_major == 2) {
- switch (Quantum) {
+ if (fd->bios_major == 2) {
+ switch (fd->Quantum) {
case 2: /* ISA_200S */
/* The value of 25 has never been verified.
It should probably be 15. */
@@ -1658,14 +1678,14 @@ static int fdomain_16x0_biosparam(struct scsi_device *sdev,
offset = 0x1f31 + drive * 25;
break;
}
- memcpy_fromio( &i, bios_mem + offset, sizeof( struct drive_info ) );
+ memcpy_fromio( &i, fd->bios_mem + offset, sizeof( struct drive_info ) );
info_array[0] = i.heads;
info_array[1] = i.sectors;
info_array[2] = i.cylinders;
- } else if (bios_major == 3
- && bios_minor >= 0
- && bios_minor < 4) { /* 3.0 and 3.2 BIOS */
- memcpy_fromio( &i, bios_mem + 0x1f71 + drive * 10,
+ } else if (fd->bios_major == 3
+ && fd->bios_minor >= 0
+ && fd->bios_minor < 4) { /* 3.0 and 3.2 BIOS */
+ memcpy_fromio( &i, fd->bios_mem + 0x1f71 + drive * 10,
sizeof( struct drive_info ) );
info_array[0] = i.heads + 1;
info_array[1] = i.sectors;
@@ -1736,12 +1756,13 @@ static int fdomain_16x0_biosparam(struct scsi_device *sdev,
#ifndef PCMCIA
static int fdomain_16x0_release(struct Scsi_Host *shpnt)
{
+ struct fdomain *fd = shost_priv(shpnt);
if (shpnt->irq)
- free_irq(shpnt->irq, shpnt);
+ free_irq(shpnt->irq, fd);
if (shpnt->io_port && shpnt->n_io_port)
release_region(shpnt->io_port, shpnt->n_io_port);
- if (PCI_bus)
- pci_dev_put(PCI_dev);
+ if (fd->PCI_bus)
+ pci_dev_put(fd->PCI_dev);
return 0;
}
#endif
--
Ondrej Zary
\
 
 \ /
  Last update: 2019-04-08 21:37    [W:0.715 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site