lkml.org 
[lkml]   [2019]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 1/6] arm64: dts: allwinner: h6: move MMC pinctrl to dtsi
Hi,

On Mon, 8 Apr 2019 at 12:42, Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> On Mon, Apr 08, 2019 at 11:26:14AM +0200, Clément Péron wrote:
> > There is only one pinmuxing available for each MMC controller.
> >
> > Move the pinctrl to the SOC
> >
> > Signed-off-by: Clément Péron <peron.clem@gmail.com>
> > ---
> > arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi | 2 --
> > arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 4 ----
> > arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 4 ++++
> > 3 files changed, 4 insertions(+), 6 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
> > index b2526dac2fcf..62e27948a3fa 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
> > @@ -56,8 +56,6 @@
> > };
> >
> > &mmc0 {
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&mmc0_pins>;
> > vmmc-supply = <&reg_cldo1>;
> > cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
> > bus-width = <4>;
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
> > index bdb8470fc8dc..4802902e128f 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
> > @@ -104,8 +104,6 @@
> > };
> >
> > &mmc0 {
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&mmc0_pins>;
> > vmmc-supply = <&reg_cldo1>;
> > cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
> > bus-width = <4>;
> > @@ -113,8 +111,6 @@
> > };
> >
> > &mmc2 {
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&mmc2_pins>;
> > vmmc-supply = <&reg_cldo1>;
> > vqmmc-supply = <&reg_bldo2>;
> > non-removable;
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > index 3e4bb0b0de69..006d3b6418af 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > @@ -278,6 +278,8 @@
> > resets = <&ccu RST_BUS_MMC0>;
> > reset-names = "ahb";
> > interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> > + pinctrl-names = "default";
>
> This is indented with spaces and not tabulations. This error is
> reported by checkpatch.
>
> > + pinctrl-0 = <&mmc0_pins>;
> > status = "disabled";
> > #address-cells = <1>;
> > #size-cells = <0>;
> > @@ -306,6 +308,8 @@
> > resets = <&ccu RST_BUS_MMC2>;
> > reset-names = "ahb";
> > interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&mmc0_pins>;
>
> I guess you meant mmc2?
Yes

>
> Can you test your patches before sending them please?
I made a test before posting the patch but I think my U-boot correctly
mux the pins before linux.
That's why I didn't catch it.
Anyway it's really trival and I should have seen it.
My apologizes for this,
Clément

>
> Maxime
>
> --
> Maxime Ripard, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com

\
 
 \ /
  Last update: 2019-04-08 16:39    [W:0.046 / U:0.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site