[lkml]   [2019]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 1/3] ARM: dts: stm32: add stpmic1 support on stm32mp157c ed1 board

Le 04/08/2019 02:05 PM, Linus Walleij a écrit :
> On Wed, Apr 3, 2019 at 3:41 PM Pascal PAILLET-LME <> wrote:
>> This patch adds stpmic1 support on stm32mp157c ed1 board.
>> The STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10
>> regulators, 3 power switches, a watchdog and an input for a power on key.
>> Signed-off-by: Pascal Paillet <>
> OK
>> + /delete-property/dmas;
>> + /delete-property/dma-names;
> Maybe you can add a comment both to the commit message and the
> DTS file as to why you are doing this?
> I hope you are not trying to work around a bug in the driver by
> stripping out DMA configuration from the device tree, because then
> it is probably a better idea to fix the bug.
This is not a workaround. The PMIC can use the DMA over I2C bus.
Our goal is to avoid using a DMA channel for a consumer that generates a
very few traffic. Dma channels may lack for other use cases.

If you agree, you can add the to the commit message.
> Yours,
> Linus Walleij

thank you,
Best Regards,
 \ /
  Last update: 2019-04-08 14:28    [W:0.070 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site