lkml.org 
[lkml]   [2019]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 0/8] arm64: meson: Add support for USB on Amlogic G12A
From
Date
Hi Greg, Felipe, Minas,

Gentle ping about these remaining patches, who is supposed to
pick them ?

Thanks,
Neil

On 25/03/2019 10:39, Neil Armstrong wrote:
> This patchset adds support for USB on Amlogic G12A SoCs.
>
> This patchset is composed with :
> - bindings of the PHYs
> - bindings of the USB Control Glue
> - PHY Drivers
> - USB Control Glue driver
>
> Device Tree nodes will be added in a separate patchset.
>
> The Amlogic G12A USB Complex is composed of :
> - 2 USB Controllers :
> * DWC3 for USB2 and USB3 Host functionality
> * DWC2 for USB2 Peripheral functionality
> - 2 USB2 OTG PHYs, only a single one will be routed to either DWC2 to DWC3
> - 1 USB3 PHY shared with PCIE funcionnality
> - A Glue to control PHY routing, setup and OTG detection
>
> The Glue configures the UTMI 8bit interfaces for the USB2 PHYs, including
> routing of the OTG PHY between the DWC3 and DWC2 controllers, and
> setups the on-chip OTG mode selection for this PHY.
>
> This drivers supports the on-probe setup of the OTG mode, and manually
> via the USB Role interface. The IRQ mode change detect is yet to be added
> in a future patchset, mainly due to lack of hardware to validate on.
>
> Changes since v4 at [3]:
> - remove remaining phy_put/clk_put() of patch 8
> - handled phy_power_off/on() in suspend/resume
> - Collected review tag on patch 8
>
> Changes since v3 at [2]:
> - Documented and replaced magic values in USB2 PHY driver
>
> Changes since v2 at [1]:
> - Collected review tags
> - Removed syscon.h in usb2 phy driver
> - Added comment on the USB3/PCIe switch
> - Renamed dwc3_meson_g12a_usb_init_mode in glue driver
> - Changed indentation in dwc3_meson_g12a_role_set
> - Switched to of_get_compatible_child in glue code
> - Added devm_add_action_or_reset() to disable clock in case of probe failure
> - Checks priv->vbus before enabling regulator
> - Switched phy_init/phy_power_on
> - Removed priv->phys[i] NULL checks in suspend code
> - Removed clk_disable_unprepare/clk_put in remove code
>
> Changes since v1 at [0]:
> - USB2 PHY Bindings: collected tags and updated commit log
> - USB3/PCIE PHY Bindings: collected tag and updated reset list
> - DWC2 Compatible: collected tags
> - DWC3 Glue Bindings:
> - removed clock-names and reset-names for single entries
> - removed ports graph for PHYs and replaced by phys list with phy-names
> - added dr_mode and optional vbus-supply
> - fixed example
> - USB2 PHY Driver: removed USB_SUPPORT and otg.h include
> - USB3/PCIE PHY Driver: removed USB_SUPPORT, fixed comment and unused reg variable
> - USB Glue Driver:
> - Moved debugfs I/F to USB_ROLE_SWITCH framework
> - Integrated USB Glue Control Registers offset
> - Removed of graph parsing to use devm_phy_optional_get()
> - Fixed PHY mode handling and OTG switching
> - Simplified PHY calls by removing the NULL test
> - Added optional vbus regulator handling
>
> [1] https://lkml.kernel.org/r/20190212151413.24632-1-narmstrong@baylibre.com
> [2] https://lkml.kernel.org/r/20190304103846.2060-1-narmstrong@baylibre.com
> [3] https://lkml.kernel.org/r/20190318101153.7531-1-narmstrong@baylibre.com
> [4] https://lkml.kernel.org/r/20190318132655.30040-1-narmstrong@baylibre.com
>
> Neil Armstrong (8):
> dt-bindings: phy: Add Amlogic G12A USB2 PHY Bindings
> dt-bindings: phy: Add Amlogic G12A USB3+PCIE Combo PHY Bindings
> dt-bindings: usb: dwc2: Add Amlogic G12A DWC2 Compatible
> dt-bindings: usb: dwc3: Add Amlogic G12A DWC3 Glue Bindings
> phy: amlogic: add Amlogic G12A USB2 PHY Driver
> phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver
> usb: dwc2: Add Amlogic G12A DWC2 Params
> usb: dwc3: Add Amlogic G12A DWC3 glue
>
> .../bindings/phy/meson-g12a-usb2-phy.txt | 22 +
> .../bindings/phy/meson-g12a-usb3-pcie-phy.txt | 22 +
> .../devicetree/bindings/usb/amlogic,dwc3.txt | 88 +++
> .../devicetree/bindings/usb/dwc2.txt | 1 +
> drivers/phy/amlogic/Kconfig | 22 +
> drivers/phy/amlogic/Makefile | 2 +
> drivers/phy/amlogic/phy-meson-g12a-usb2.c | 341 ++++++++++
> .../phy/amlogic/phy-meson-g12a-usb3-pcie.c | 413 ++++++++++++
> drivers/usb/dwc2/params.c | 12 +
> drivers/usb/dwc3/Kconfig | 10 +
> drivers/usb/dwc3/Makefile | 1 +
> drivers/usb/dwc3/dwc3-meson-g12a.c | 604 ++++++++++++++++++
> 12 files changed, 1538 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt
> create mode 100644 Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
> create mode 100644 drivers/phy/amlogic/phy-meson-g12a-usb2.c
> create mode 100644 drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
> create mode 100644 drivers/usb/dwc3/dwc3-meson-g12a.c
>

\
 
 \ /
  Last update: 2019-04-08 11:39    [W:0.062 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site