lkml.org 
[lkml]   [2019]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/3] dt-bindings: backlight: add lm3630a bindings
Hi Dan,

On Tue, Apr 02, 2019 at 08:44:22AM -0500, Dan Murphy wrote:
> Also one other comment I noticed when reviewing the code that there is no definition to
> which child led properties are optional and which are required?

With the new YAML bindings, there is a separate toplevel 'required' tag in
the schema. Here is a snippet from my last submission that illustrates
this:

properties:
compatible:
const: ti,lm3630a

reg:
maxItems: 1

ti,linear-mapping-mode:
description: |
Enable linear mapping mode. If disabled, then it will use exponential
mapping mode in which the ramp up/down appears to have a more uniform
transition to the human eye.
type: boolean

required:
- compatible
- reg

So 'ti,linear-mapping-mode' is optional in this example.

> > + led-sources:
> > + description: |
> > + List of device current outputs the LED is connected to.
> > + allOf:
> > + - $ref: /schemas/types.yaml#/definitions/uint32-array
> > + - minItems: 1
> > + maxItems: 2
> > + items:
> > + minimum: 0
> > + maximum: 1
> > +
>
> label and led-sources are already defined in the common.txt no need to redefine them here.

We'll still need to define the led-sources and label in this binding
with the new format even though it will also be in the LED common
bindings. We won't have to put the common things like the description
since that information will come from the common binding. We only need
to specify the additional constraints like the min/max number of items
and the min/max value for each item for this particular example.

Brian

\
 
 \ /
  Last update: 2019-04-07 13:29    [W:0.081 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site