lkml.org 
[lkml]   [2019]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/3] Input: add a driver for GPIO controllable vibrators
Hi Luca,

On Sun, Apr 07, 2019 at 05:58:41PM +0200, Luca Weiss wrote:
> Provide a simple driver for GPIO controllable vibrators.
> It will be used by the Fairphone 2.
>
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
> drivers/input/misc/Kconfig | 12 ++
> drivers/input/misc/Makefile | 1 +
> drivers/input/misc/gpio-vibra.c | 214 ++++++++++++++++++++++++++++++++
> 3 files changed, 227 insertions(+)
> create mode 100644 drivers/input/misc/gpio-vibra.c
>
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index e15ed1bb8558..6dfe9e2fe5b1 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -290,6 +290,18 @@ config INPUT_GPIO_DECODER
> To compile this driver as a module, choose M here: the module
> will be called gpio_decoder.
>
> +config INPUT_GPIO_VIBRA
> + tristate "GPIO vibrator support"
> + depends on GPIOLIB || COMPILE_TEST
> + select INPUT_FF_MEMLESS
> + help
> + Say Y here to get support for GPIO based vibrator devices.
> +
> + If unsure, say N.
> +
> + To compile this driver as a module, choose M here: the module will be
> + called gpio-vibra.
> +
> config INPUT_IXP4XX_BEEPER
> tristate "IXP4XX Beeper support"
> depends on ARCH_IXP4XX
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index b936c5b1d4ac..f38ebbdb05e2 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -36,6 +36,7 @@ obj-$(CONFIG_INPUT_DRV2667_HAPTICS) += drv2667.o
> obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o
> obj-$(CONFIG_INPUT_GPIO_BEEPER) += gpio-beeper.o
> obj-$(CONFIG_INPUT_GPIO_DECODER) += gpio_decoder.o
> +obj-$(CONFIG_INPUT_GPIO_VIBRA) += gpio-vibra.o
> obj-$(CONFIG_INPUT_HISI_POWERKEY) += hisi_powerkey.o
> obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
> obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o
> diff --git a/drivers/input/misc/gpio-vibra.c b/drivers/input/misc/gpio-vibra.c
> new file mode 100644
> index 000000000000..14f9534668c8
> --- /dev/null
> +++ b/drivers/input/misc/gpio-vibra.c
> @@ -0,0 +1,214 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * GPIO vibrator driver
> + *
> + * Copyright (C) 2019 Luca Weiss <luca@z3ntu.xyz>
> + *
> + * Based on PWM vibrator driver:
> + * Copyright (C) 2017 Collabora Ltd.
> + *
> + * Based on previous work from:
> + * Copyright (C) 2012 Dmitry Torokhov <dmitry.torokhov@gmail.com>
> + *
> + * Based on PWM beeper driver:
> + * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
> + */
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/input.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/slab.h>
> +
> +enum vibrator_state {
> + VIBRATOR_OFF,
> + VIBRATOR_ON
> +};

I'd probably go with simple "bool running".

> +
> +struct gpio_vibrator {
> + struct input_dev *input;
> + struct gpio_desc *gpio;
> + struct regulator *vcc;
> +
> + struct work_struct play_work;
> + enum vibrator_state state;
> + bool vcc_on;
> +};
> +
> +static int gpio_vibrator_start(struct gpio_vibrator *vibrator)
> +{
> + struct device *pdev = vibrator->input->dev.parent;
> + int err;
> +
> + if (!vibrator->vcc_on) {
> + err = regulator_enable(vibrator->vcc);
> + if (err) {
> + dev_err(pdev, "failed to enable regulator: %d", err);
> + return err;
> + }
> + vibrator->vcc_on = true;
> + }
> +
> + gpiod_set_value(vibrator->gpio, 1);

Since this is called by work item and thus from context that can sleep,
we can use gpiod_set_value_cansleep() so that "slow" GPIOs can be used
with the driver.

> +
> + return 0;
> +}
> +
> +static void gpio_vibrator_stop(struct gpio_vibrator *vibrator)
> +{
> + gpiod_set_value(vibrator->gpio, 0);
> +
> + if (vibrator->vcc_on) {
> + regulator_disable(vibrator->vcc);
> + vibrator->vcc_on = false;
> + }
> +}
> +
> +static void gpio_vibrator_play_work(struct work_struct *work)
> +{
> + struct gpio_vibrator *vibrator = container_of(work,
> + struct gpio_vibrator, play_work);
> +
> + if (vibrator->state == VIBRATOR_ON)
> + gpio_vibrator_start(vibrator);
> + else
> + gpio_vibrator_stop(vibrator);
> +}
> +
> +static int gpio_vibrator_play_effect(struct input_dev *dev, void *data,
> + struct ff_effect *effect)
> +{
> + struct gpio_vibrator *vibrator = input_get_drvdata(dev);
> +
> + int level = effect->u.rumble.strong_magnitude;
> +
> + if (!level)
> + level = effect->u.rumble.weak_magnitude;
> +
> + if (level)
> + vibrator->state = VIBRATOR_ON;
> + else
> + vibrator->state = VIBRATOR_OFF;
> +
> + schedule_work(&vibrator->play_work);
> +
> + return 0;
> +}
> +
> +static void gpio_vibrator_close(struct input_dev *input)
> +{
> + struct gpio_vibrator *vibrator = input_get_drvdata(input);
> +
> + cancel_work_sync(&vibrator->play_work);
> + gpio_vibrator_stop(vibrator);

Do you want to update vibrator->state here?

> +}
> +
> +static int gpio_vibrator_probe(struct platform_device *pdev)
> +{
> + struct gpio_vibrator *vibrator;
> + int err;
> +
> + vibrator = devm_kzalloc(&pdev->dev, sizeof(*vibrator), GFP_KERNEL);
> + if (!vibrator)
> + return -ENOMEM;
> +
> + vibrator->input = devm_input_allocate_device(&pdev->dev);
> + if (!vibrator->input)
> + return -ENOMEM;
> +
> + vibrator->vcc = devm_regulator_get(&pdev->dev, "vcc");
> + err = PTR_ERR_OR_ZERO(vibrator->vcc);
> + if (err) {
> + if (err != -EPROBE_DEFER)
> + dev_err(&pdev->dev, "Failed to request regulator: %d",
> + err);
> + return err;
> + }
> +
> + vibrator->gpio = devm_gpiod_get(&pdev->dev, "enable", GPIOD_OUT_LOW);
> + err = PTR_ERR_OR_ZERO(vibrator->gpio);
> + if (err) {
> + if (err != -EPROBE_DEFER)
> + dev_err(&pdev->dev, "Failed to request main gpio: %d",
> + err);
> + return err;
> + }
> +
> + INIT_WORK(&vibrator->play_work, gpio_vibrator_play_work);
> +
> + vibrator->input->name = "gpio-vibrator";
> + vibrator->input->id.bustype = BUS_HOST;
> + vibrator->input->dev.parent = &pdev->dev;

No need to set as you used devm_input_device_alloc().

> + vibrator->input->close = gpio_vibrator_close;
> +
> + input_set_drvdata(vibrator->input, vibrator);
> + input_set_capability(vibrator->input, EV_FF, FF_RUMBLE);
> +
> + err = input_ff_create_memless(vibrator->input, NULL,
> + gpio_vibrator_play_effect);
> + if (err) {
> + dev_err(&pdev->dev, "Couldn't create FF dev: %d", err);
> + return err;
> + }
> +
> + err = input_register_device(vibrator->input);
> + if (err) {
> + dev_err(&pdev->dev, "Couldn't register input dev: %d", err);
> + return err;
> + }
> +
> + platform_set_drvdata(pdev, vibrator);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused gpio_vibrator_suspend(struct device *dev)
> +{
> + struct gpio_vibrator *vibrator = dev_get_drvdata(dev);
> +
> + cancel_work_sync(&vibrator->play_work);
> + if (vibrator->state == VIBRATOR_ON)
> + gpio_vibrator_stop(vibrator);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused gpio_vibrator_resume(struct device *dev)
> +{
> + struct gpio_vibrator *vibrator = dev_get_drvdata(dev);
> +
> + if (vibrator->state == VIBRATOR_ON)
> + gpio_vibrator_start(vibrator);
> +
> + return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(gpio_vibrator_pm_ops,
> + gpio_vibrator_suspend, gpio_vibrator_resume);
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id gpio_vibra_dt_match_table[] = {
> + { .compatible = "gpio-vibrator" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, gpio_vibra_dt_match_table);
> +#endif
> +
> +static struct platform_driver gpio_vibrator_driver = {
> + .probe = gpio_vibrator_probe,
> + .driver = {
> + .name = "gpio-vibrator",
> + .pm = &gpio_vibrator_pm_ops,
> + .of_match_table = of_match_ptr(gpio_vibra_dt_match_table),
> + },
> +};
> +module_platform_driver(gpio_vibrator_driver);
> +
> +MODULE_AUTHOR("Luca Weiss <luca@z3ntu.xy>");
> +MODULE_DESCRIPTION("GPIO vibrator driver");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:gpio-vibrator");
> --
> 2.21.0
>

Thanks.

--
Dmitry

\
 
 \ /
  Last update: 2019-04-08 00:20    [W:0.076 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site