lkml.org 
[lkml]   [2019]   [Apr]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v5 2/5] dt-bindings: phy: add binding for Allwinner USB3 PHY
From


于 2019年4月6日 GMT+08:00 下午3:14:02, Rob Herring <robh@kernel.org> 写到:
>On Sat, Apr 06, 2019 at 04:57:33AM +0800, Icenowy Zheng wrote:
>> The new Allwinner H6 SoC contains a USB3 PHY that is wired to the
>> external USB3 pins of the SoC.
>>
>> Add a device tree binding for the PHY.
>>
>> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
>> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
>> ---
>> Changes in v5:
>> - Dropped Vbus regulator and added connector subnode.
>>
>> Changes in v4:
>> - Changed Vbus regulator property to vbus-supply.
>>
>> Changes in v3:
>> - Added Chen-Yu's Review tag.
>>
>> No changes in v2, v1.
>>
>> .../bindings/phy/sun50i-usb3-phy.txt | 28
>+++++++++++++++++++
>> 1 file changed, 28 insertions(+)
>> create mode 100644
>Documentation/devicetree/bindings/phy/sun50i-usb3-phy.txt
>>
>> diff --git
>a/Documentation/devicetree/bindings/phy/sun50i-usb3-phy.txt
>b/Documentation/devicetree/bindings/phy/sun50i-usb3-phy.txt
>> new file mode 100644
>> index 000000000000..eeedc53e6360
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/sun50i-usb3-phy.txt
>> @@ -0,0 +1,28 @@
>> +Allwinner sun50i USB3 PHY
>> +-----------------------
>> +
>> +Required properties:
>> +- compatible : should be one of
>> + * allwinner,sun60i-h6-usb3-phy
>> +- reg : a list of offset + length pairs
>> +- #phy-cells : from the generic phy bindings, must be 0
>> +- clocks : phandle + clock specifier for the phy clock
>> +- resets : phandle + reset specifier for the phy reset
>> +
>> +Optional nodes:
>> +- connector : A sub-node required for representing the connector
>connected
>> + to the USB PHY. See ../connector/usb-connector.txt for
>details.
>> +
>> +Example:
>> + usb3phy: phy@5210000 {
>> + compatible = "allwinner,sun50i-h6-usb3-phy";
>> + reg = <0x5210000 0x10000>;
>> + clocks = <&ccu CLK_USB_PHY1>;
>> + resets = <&ccu RST_USB_PHY1>;
>> + #phy-cells = <0>;
>> +
>> + connector {
>> + compatible = "usb-a-connector";
>> + label = "USB3";
>
>The binding defines that a connector is a child of USB controller or

Please note that the word used is not "USB controller", but "USB interface
controller".

A USB controller is something that deal with USB protocol, and connect to a USB
PHY with ULPI/UTMI/PIPE interface. It's not connected to the connector
directly at all. Then the PHY is connected to the interface controller (if present), or
the connector, with D+, D- and SS pins.

>some port controller (such as USB-C ctrlr) with OF graph to USB
>controller. So either way, this is wrong unless this is more than just
>a
>phy.
>
>Rob
>
>_______________________________________________
>linux-arm-kernel mailing list
>linux-arm-kernel@lists.infradead.org
>http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

--
使用 K-9 Mail 发送自我的Android设备。

\
 
 \ /
  Last update: 2019-04-06 09:25    [W:1.000 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site