lkml.org 
[lkml]   [2019]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 10/12] pinctrl: sunxi: Support I/O bias voltage setting on H6
Date
From: Ondrej Jirman <megous@megous.com>

H6 SoC has a "pio group withstand voltage mode" register (datasheet
description), that needs to be used to select either 1.8V or 3.3V
I/O mode, based on what voltage is powering the respective pin
banks and is thus used for I/O signals.

Add support for configuring this register according to the voltage
of the pin bank regulator (if enabled).

This is similar to the support for I/O bias voltage setting patch
for A80 and the same concerns apply. (see commit 402bfb3c135213dc
Support I/O bias voltage setting on A80).

Signed-off-by: Ondrej Jirman <megous@megous.com>
---
drivers/pinctrl/sunxi/pinctrl-sun50i-h6.c | 1 +
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 14 ++++++++++++++
drivers/pinctrl/sunxi/pinctrl-sunxi.h | 3 +++
3 files changed, 18 insertions(+)

diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-h6.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-h6.c
index ef4268cc6227..30b1befa8ed8 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun50i-h6.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-h6.c
@@ -591,6 +591,7 @@ static const struct sunxi_pinctrl_desc h6_pinctrl_data = {
.irq_banks = 4,
.irq_bank_map = h6_irq_bank_map,
.irq_read_needs_mux = true,
+ .io_bias_cfg_variant = IO_BIAS_CFG_V2,
};

static int h6_pinctrl_probe(struct platform_device *pdev)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index 9f329fec77cf..59a4ed396d92 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -607,6 +607,8 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl,
unsigned pin,
struct regulator *supply)
{
+ unsigned short bank = pin / PINS_PER_BANK;
+ unsigned long flags;
u32 val, reg;
int uV;

@@ -639,6 +641,18 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl,
reg = readl(pctl->membase + sunxi_grp_config_reg(pin));
reg &= ~IO_BIAS_MASK;
writel(reg | val, pctl->membase + sunxi_grp_config_reg(pin));
+ } else if (pctl->desc->io_bias_cfg_variant == IO_BIAS_CFG_V2) {
+ val = uV <= 1800000 ? 1 : 0;
+
+ dev_info(pctl->dev,
+ "Setting voltage bias to %sV on bank P%c\n",
+ val ? "1.8" : "3.3", 'A' + bank);
+
+ raw_spin_lock_irqsave(&pctl->lock, flags);
+ reg = readl(pctl->membase + PIO_POW_MOD_SEL_REG);
+ reg &= ~(1 << bank);
+ writel(reg | val << bank, pctl->membase + PIO_POW_MOD_SEL_REG);
+ raw_spin_unlock_irqrestore(&pctl->lock, flags);
}

return 0;
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.h b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
index 476772f91dba..3a66376f141b 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
@@ -95,7 +95,10 @@
#define PINCTRL_SUN7I_A20 BIT(7)
#define PINCTRL_SUN8I_R40 BIT(8)

+#define PIO_POW_MOD_SEL_REG 0x340
+
#define IO_BIAS_CFG_V1 1
+#define IO_BIAS_CFG_V2 2

struct sunxi_desc_function {
unsigned long variant;
--
2.21.0
\
 
 \ /
  Last update: 2019-04-06 01:47    [W:0.207 / U:17.264 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site