lkml.org 
[lkml]   [2019]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 05/12] net: stmmac: sun8i: add support for Allwinner H6 EMAC
Date
From: Icenowy Zheng <icenowy@aosc.io>

The EMAC on Allwinner H6 is just like the one on A64. The "internal PHY"
on H6 is on a co-packaged AC200 chip, and it's not really internal (it's
connected via RMII at PA GPIO bank).

Add support for the Allwinner H6 EMAC in the dwmac-sun8i driver.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
.../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index 195669f550f0..e3e3dc44b33b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -147,6 +147,21 @@ static const struct emac_variant emac_variant_a64 = {
.tx_delay_max = 7,
};

+static const struct emac_variant emac_variant_h6 = {
+ .default_syscon_value = 0x50000,
+ .syscon_field = &sun8i_syscon_reg_field,
+ /*
+ * The "Internal PHY" of H6 is not on the die. It's on the co-packaged
+ * AC200 chip instead.
+ */
+ .soc_has_internal_phy = false,
+ .support_mii = true,
+ .support_rmii = true,
+ .support_rgmii = true,
+ .rx_delay_max = 31,
+ .tx_delay_max = 7,
+};
+
#define EMAC_BASIC_CTL0 0x00
#define EMAC_BASIC_CTL1 0x04
#define EMAC_INT_STA 0x08
@@ -1210,6 +1225,8 @@ static const struct of_device_id sun8i_dwmac_match[] = {
.data = &emac_variant_r40 },
{ .compatible = "allwinner,sun50i-a64-emac",
.data = &emac_variant_a64 },
+ { .compatible = "allwinner,sun50i-h6-emac",
+ .data = &emac_variant_h6 },
{ }
};
MODULE_DEVICE_TABLE(of, sun8i_dwmac_match);
--
2.21.0
\
 
 \ /
  Last update: 2019-04-06 01:47    [W:0.231 / U:13.168 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site