lkml.org 
[lkml]   [2019]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 1/1] rtc: ds3232: get SRAM access using NVMEM Framework
Hi,

On 05/04/2019 11:14:35+0000, Han Nandor wrote:
> DS3232 RTC has 236 bytes of persistent memory.
>
> Add RTC SRAM read and write access using
> the NVMEM Framework.
>
> Signed-off-by: Nandor Han <nandor.han@vaisala.com>
> ---
>
> Description
> -----------
> Provides DS3232 RTC SRAM access using NVMEM framework.
>
> Testing
> -------
> The test was done on a custom board which contains a
> DS3232 RTC device.
> Kernel Version: 4.14.60 (Just for clarity, the patch is against master)
>
> 1. Verify that SRAM is accessible using NVMEM interface: PASS
> `
> # hexdump /sys/bus/nvmem/devices/ds3232_sram0/nvmem
> 0000000 0000 0000 0000 0000 0000 0000 0000 0000
> *
> 00000e0
> `
> 2. Modify the content.
> `
> # echo testing > /sys/bus/nvmem/devices/ds3232_sram0/nvmem
> #
> `
> 3. Power cycle the board and verify that contents are preserved: PASS
> `
> # hexdump -n 10 -C /sys/bus/nvmem/devices/ds3232_sram0/nvmem
> 00000000 74 65 73 74 69 6e 67 0a 00 00 |testing...|
> 0000000a
> `
>

Thanks for that nice description!

> drivers/rtc/rtc-ds3232.c | 41 ++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 39 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/rtc/rtc-ds3232.c b/drivers/rtc/rtc-ds3232.c
> index 7184e5145f12..fe615aedaa9a 100644
> --- a/drivers/rtc/rtc-ds3232.c
> +++ b/drivers/rtc/rtc-ds3232.c
> @@ -24,6 +24,8 @@
> #include <linux/regmap.h>
> #include <linux/hwmon.h>
>
> +#include "rtc-core.h"
> +

The drivers should not have to include that header, see
fd5cd21d995e67f87b3eb4adf938be85fe83ef4b (from 4.16).

> #define DS3232_REG_SECONDS 0x00
> #define DS3232_REG_MINUTES 0x01
> #define DS3232_REG_HOURS 0x02
> @@ -48,12 +50,17 @@
> # define DS3232_REG_SR_A1F 0x01
>
> #define DS3232_REG_TEMPERATURE 0x11
> +#define DS3232_REG_SRAM_START 0x14
> +#define DS3232_REG_SRAM_END 0xFF
> +
> +#define DS3232_REG_SRAM_SIZE 236
>

> struct ds3232 {
> struct device *dev;
> struct regmap *regmap;
> int irq;
> struct rtc_device *rtc;
> + struct nvmem_config nvmem_cfg;
>

You don't actually need to keep that structure for the whole life of the
device as it is copied as soon as it is registered. I usually prefer to
have it on the stack.

> bool suspended;
> };
> @@ -461,6 +468,24 @@ static const struct rtc_class_ops ds3232_rtc_ops = {
> .alarm_irq_enable = ds3232_alarm_irq_enable,
> };
>
> +static int ds3232_nvmem_read(void *priv, unsigned int offset, void *val,
> + size_t bytes)
> +{
> + struct ds3232 *ds3232 = (struct ds3232 *)priv;
> +
> + return regmap_bulk_read(ds3232->regmap, DS3232_REG_SRAM_START + offset,
> + val, bytes);
> +}
> +
> +static int ds3232_nvmem_write(void *priv, unsigned int offset, void *val,
> + size_t bytes)
> +{
> + struct ds3232 *ds3232 = (struct ds3232 *)priv;
> +
> + return regmap_bulk_write(ds3232->regmap, DS3232_REG_SRAM_START + offset,
> + val, bytes);
> +}
> +
> static int ds3232_probe(struct device *dev, struct regmap *regmap, int irq,
> const char *name)
> {
> @@ -476,6 +501,14 @@ static int ds3232_probe(struct device *dev, struct regmap *regmap, int irq,
> ds3232->dev = dev;
> dev_set_drvdata(dev, ds3232);
>
> + ds3232->nvmem_cfg.name = "ds3232_sram";
> + ds3232->nvmem_cfg.stride = 1;
> + ds3232->nvmem_cfg.size = DS3232_REG_SRAM_SIZE;
> + ds3232->nvmem_cfg.word_size = 1;
> + ds3232->nvmem_cfg.reg_read = ds3232_nvmem_read;
> + ds3232->nvmem_cfg.reg_write = ds3232_nvmem_write;
> + ds3232->nvmem_cfg.priv = ds3232;

Please also set the type (battery backed).

> +
> ret = ds3232_check_rtc_status(dev);
> if (ret)
> return ret;
> @@ -490,6 +523,10 @@ static int ds3232_probe(struct device *dev, struct regmap *regmap, int irq,
> if (IS_ERR(ds3232->rtc))
> return PTR_ERR(ds3232->rtc);
>
> + ds3232->rtc->dev.of_node = dev->of_node;

Please don't mess with rtc->dev.

> + ds3232->rtc->nvmem_config = &ds3232->nvmem_cfg;
> + rtc_nvmem_register(ds3232->rtc);

This part will not compile on v5.1-rc1.

> +
> if (ds3232->irq > 0) {
> ret = devm_request_threaded_irq(dev, ds3232->irq, NULL,
> ds3232_irq,
> @@ -542,7 +579,7 @@ static int ds3232_i2c_probe(struct i2c_client *client,
> static const struct regmap_config config = {
> .reg_bits = 8,
> .val_bits = 8,
> - .max_register = 0x13,
> + .max_register = DS3232_REG_SRAM_END,
> };
>
> regmap = devm_regmap_init_i2c(client, &config);
> @@ -609,7 +646,7 @@ static int ds3234_probe(struct spi_device *spi)
> static const struct regmap_config config = {
> .reg_bits = 8,
> .val_bits = 8,
> - .max_register = 0x13,
> + .max_register = DS3232_REG_SRAM_END,
> .write_flag_mask = 0x80,
> };
> struct regmap *regmap;
> --
> 2.17.2
>

--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2019-04-05 23:45    [W:0.780 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site