lkml.org 
[lkml]   [2019]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] platform/chrome: wilco_ec: Add USB PowerShare Policy control
Date
USB PowerShare is a policy which affects charging via the special
USB PowerShare port (marked with a small lightning bolt or battery icon)
when in low power states:
- In S0, the port will always provide power.
- In S0ix, if power_share is enabled, then power will be supplied to
the port when on AC or if battery is > 50%. Else no power is supplied.
- In S5, if power_share is enabled, then power will be supplied to
the port when on AC. Else no power is supplied.

Signed-off-by: Nick Crews <ncrews@chromium.org>
---
drivers/platform/chrome/wilco_ec/Makefile | 2 +-
drivers/platform/chrome/wilco_ec/core.c | 9 ++
drivers/platform/chrome/wilco_ec/sysfs.c | 129 ++++++++++++++++++++++
include/linux/platform_data/wilco-ec.h | 3 +
4 files changed, 142 insertions(+), 1 deletion(-)
create mode 100644 drivers/platform/chrome/wilco_ec/sysfs.c

diff --git a/drivers/platform/chrome/wilco_ec/Makefile b/drivers/platform/chrome/wilco_ec/Makefile
index 063e7fb4ea17..1281dd7737c4 100644
--- a/drivers/platform/chrome/wilco_ec/Makefile
+++ b/drivers/platform/chrome/wilco_ec/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0

-wilco_ec-objs := core.o mailbox.o
+wilco_ec-objs := core.o mailbox.o sysfs.o
obj-$(CONFIG_WILCO_EC) += wilco_ec.o
wilco_ec_debugfs-objs := debugfs.o
obj-$(CONFIG_WILCO_EC_DEBUGFS) += wilco_ec_debugfs.o
diff --git a/drivers/platform/chrome/wilco_ec/core.c b/drivers/platform/chrome/wilco_ec/core.c
index 05e1e2be1c91..abd15d04e57b 100644
--- a/drivers/platform/chrome/wilco_ec/core.c
+++ b/drivers/platform/chrome/wilco_ec/core.c
@@ -89,8 +89,16 @@ static int wilco_ec_probe(struct platform_device *pdev)
goto unregister_debugfs;
}

+ ret = wilco_ec_add_sysfs(ec);
+ if (ret < 0) {
+ dev_err(dev, "Failed to create sysfs entries: %d", ret);
+ goto unregister_rtc;
+ }
+
return 0;

+unregister_rtc:
+ platform_device_unregister(ec->rtc_pdev);
unregister_debugfs:
if (ec->debugfs_pdev)
platform_device_unregister(ec->debugfs_pdev);
@@ -102,6 +110,7 @@ static int wilco_ec_remove(struct platform_device *pdev)
{
struct wilco_ec_device *ec = platform_get_drvdata(pdev);

+ wilco_ec_remove_sysfs(ec);
platform_device_unregister(ec->rtc_pdev);
if (ec->debugfs_pdev)
platform_device_unregister(ec->debugfs_pdev);
diff --git a/drivers/platform/chrome/wilco_ec/sysfs.c b/drivers/platform/chrome/wilco_ec/sysfs.c
new file mode 100644
index 000000000000..ec5211257a58
--- /dev/null
+++ b/drivers/platform/chrome/wilco_ec/sysfs.c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Google LLC
+ *
+ * Sysfs properties used to modify EC-controlled features on Wilco devices.
+ * The entries will appear under /sys/bus/platform/devices/GOOG000C:00/
+ *
+ * USB PowerShare is a policy which affects charging via the special
+ * USB PowerShare port (marked with a small lightning bolt or battery icon)
+ * when in low power states:
+ * - In S0, the port will always provide power.
+ * - In S0ix, if power_share is enabled, then power will be supplied to
+ * the port when on AC or if battery is > 50%. Else no power is supplied.
+ * - In S5, if power_share is enabled, then power will be supplied to
+ * the port when on AC. Else no power is supplied.
+ */
+
+#include <linux/platform_data/wilco-ec.h>
+#include <linux/sysfs.h>
+
+#define CMD_USB_POWER_SHARE 0x39
+
+enum usb_power_share_op {
+ POWER_SHARE_GET = 0,
+ POWER_SHARE_SET = 1,
+};
+
+struct usb_power_share_request {
+ u8 cmd; /* Always CMD_USB_POWER_SHARE */
+ u8 reserved;
+ u8 op; /* One of enum usb_power_share_op */
+ u8 val; /* When setting, either 0 or 1 */
+} __packed;
+
+struct usb_power_share_response {
+ u8 reserved;
+ u8 status; /* Set by EC to 0 on success, other value on failure */
+ u8 val; /* When getting, set by EC to either 0 or 1 */
+} __packed;
+
+static int send_usb_power_share(struct wilco_ec_device *ec,
+ struct usb_power_share_request *rq,
+ struct usb_power_share_response *rs)
+{
+ struct wilco_ec_message msg;
+ int ret;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.type = WILCO_EC_MSG_LEGACY;
+ msg.request_data = rq;
+ msg.request_size = sizeof(*rq);
+ msg.response_data = rs;
+ msg.response_size = sizeof(*rs);
+ ret = wilco_ec_mailbox(ec, &msg);
+ if (ret < 0)
+ return ret;
+
+ if (rs->status)
+ return -EIO;
+
+ return 0;
+}
+
+static ssize_t usb_power_share_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct wilco_ec_device *ec = dev_get_drvdata(dev);
+ struct usb_power_share_request rq;
+ struct usb_power_share_response rs;
+ int ret;
+
+ rq.cmd = CMD_USB_POWER_SHARE;
+ rq.op = POWER_SHARE_GET;
+
+ ret = send_usb_power_share(ec, &rq, &rs);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", rs.val);
+}
+
+static ssize_t usb_power_share_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct wilco_ec_device *ec = dev_get_drvdata(dev);
+ struct usb_power_share_request rq;
+ struct usb_power_share_response rs;
+ int ret;
+ u8 val;
+
+ ret = kstrtou8(buf, 10, &val);
+ if (ret < 0)
+ return ret;
+
+ if (val != 0 && val != 1)
+ return -EINVAL;
+
+ rq.cmd = CMD_USB_POWER_SHARE;
+ rq.op = POWER_SHARE_SET;
+ rq.val = val;
+
+ ret = send_usb_power_share(ec, &rq, &rs);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(usb_power_share);
+
+static struct attribute *wilco_dev_attrs[] = {
+ &dev_attr_usb_power_share.attr,
+ NULL,
+};
+
+static struct attribute_group wilco_dev_attr_group = {
+ .attrs = wilco_dev_attrs,
+};
+
+int wilco_ec_add_sysfs(struct wilco_ec_device *ec)
+{
+ return sysfs_create_group(&ec->dev->kobj, &wilco_dev_attr_group);
+}
+
+void wilco_ec_remove_sysfs(struct wilco_ec_device *ec)
+{
+ sysfs_create_group(&ec->dev->kobj, &wilco_dev_attr_group);
+}
diff --git a/include/linux/platform_data/wilco-ec.h b/include/linux/platform_data/wilco-ec.h
index 1ff224793c99..05d011605b85 100644
--- a/include/linux/platform_data/wilco-ec.h
+++ b/include/linux/platform_data/wilco-ec.h
@@ -123,4 +123,7 @@ struct wilco_ec_message {
*/
int wilco_ec_mailbox(struct wilco_ec_device *ec, struct wilco_ec_message *msg);

+int wilco_ec_add_sysfs(struct wilco_ec_device *ec);
+void wilco_ec_remove_sysfs(struct wilco_ec_device *ec);
+
#endif /* WILCO_EC_H */
--
2.20.1
\
 
 \ /
  Last update: 2019-04-05 22:09    [W:0.045 / U:33.496 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site