lkml.org 
[lkml]   [2019]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 1/1] ARM: dts: colibri: introduce dts with UHS-I support enabled
Date
Introduce DTS for Colibri iMX6DL with proper configuration for VGEN3,
which allows that rail to be automatically switched to 1.8 volts for
proper UHS-I operation mode.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
---
arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 245 +-----------------
arch/arm/boot/dts/imx6dl-colibri-eval-v3.dtsi | 213 +++++++++++++++
.../boot/dts/imx6dl-colibri-uhs-eval-v3.dts | 29 +++
arch/arm/boot/dts/imx6qdl-colibri.dtsi | 36 ++-
4 files changed, 278 insertions(+), 245 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6dl-colibri-eval-v3.dtsi
create mode 100644 arch/arm/boot/dts/imx6dl-colibri-uhs-eval-v3.dts

diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
index 9a5d6c94cca4..14d7f359d8d6 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -1,258 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
- * Copyright 2014-2016 Toradex AG
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2019 Toradex AG
*/

/dts-v1/;

-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6dl.dtsi"
-#include "imx6qdl-colibri.dtsi"
+#include "imx6dl-colibri-eval-v3.dtsi"

/ {
model = "Toradex Colibri iMX6DL/S on Colibri Evaluation Board V3";
compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl",
"fsl,imx6dl";
-
- /* Will be filled by the bootloader */
- memory@10000000 {
- device_type = "memory";
- reg = <0x10000000 0>;
- };
-
- aliases {
- i2c0 = &i2c2;
- i2c1 = &i2c3;
- };
-
- aliases {
- rtc0 = &rtc_i2c;
- rtc1 = &snvs_rtc;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- /* Fixed crystal dedicated to mcp251x */
- clk16m: clock-16m {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <16000000>;
- clock-output-names = "clk16m";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_keys>;
-
- wakeup {
- label = "Wake-Up";
- gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */
- linux,code = <KEY_WAKEUP>;
- debounce-interval = <10>;
- wakeup-source;
- };
- };
-
- lcd_display: disp0 {
- compatible = "fsl,imx-parallel-display";
- #address-cells = <1>;
- #size-cells = <0>;
- interface-pix-fmt = "bgr666";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu1_lcdif>;
- status = "okay";
-
- port@0 {
- reg = <0>;
-
- lcd_display_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- lcd_display_out: endpoint {
- remote-endpoint = <&lcd_panel_in>;
- };
- };
- };
-
- panel: panel {
- /*
- * edt,et057090dhu: EDT 5.7" LCD TFT
- * edt,et070080dh6: EDT 7.0" LCD TFT
- */
- compatible = "edt,et057090dhu";
- backlight = <&backlight>;
-
- port {
- lcd_panel_in: endpoint {
- remote-endpoint = <&lcd_display_out>;
- };
- };
- };
-};
-
-&backlight {
- brightness-levels = <0 127 191 223 239 247 251 255>;
- default-brightness-level = <1>;
- status = "okay";
-};
-
-/* Colibri SSP */
-&ecspi4 {
- status = "okay";
-
- mcp251x0: mcp251x@0 {
- compatible = "microchip,mcp2515";
- reg = <0>;
- clocks = <&clk16m>;
- interrupt-parent = <&gpio3>;
- interrupts = <27 0x2>;
- spi-max-frequency = <10000000>;
- status = "okay";
- };
-};
-
-&hdmi {
- status = "okay";
-};
-
-/*
- * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
- */
-&i2c3 {
- status = "okay";
-
- /* M41T0M6 real time clock on carrier board */
- rtc_i2c: rtc@68 {
- compatible = "st,m41t0";
- reg = <0x68>;
- };
-};
-
-&ipu1_di0_disp0 {
- remote-endpoint = <&lcd_display_in>;
-};
-
-&pwm1 {
- status = "okay";
-};
-
-&pwm2 {
- status = "okay";
-};
-
-&pwm3 {
- status = "okay";
-};
-
-&pwm4 {
- status = "okay";
-};
-
-&reg_usb_host_vbus {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&uart3 {
- status = "okay";
-};
-
-&usbh1 {
- vbus-supply = <&reg_usb_host_vbus>;
- status = "okay";
-};
-
-&usbotg {
- status = "okay";
};

/* Colibri MMC */
&usdhc1 {
status = "okay";
};
-
-&weim {
- status = "okay";
-
- /* weim memory map: 32MB on CS0, CS1, CS2 and CS3 */
- ranges = <0 0 0x08000000 0x02000000
- 1 0 0x0a000000 0x02000000
- 2 0 0x0c000000 0x02000000
- 3 0 0x0e000000 0x02000000>;
-
- /* SRAM on Colibri nEXT_CS0 */
- sram@0,0 {
- compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram";
- reg = <0 0 0x00010000>;
- #address-cells = <1>;
- #size-cells = <1>;
- bank-width = <2>;
- fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
- 0x00000000 0x04000040 0x00000000>;
- };
-
- /* SRAM on Colibri nEXT_CS1 */
- sram@1,0 {
- compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram";
- reg = <1 0 0x00010000>;
- #address-cells = <1>;
- #size-cells = <1>;
- bank-width = <2>;
- fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
- 0x00000000 0x04000040 0x00000000>;
- };
-};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dtsi
new file mode 100644
index 000000000000..3e73fcaca057
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dtsi
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2014-2016 Toradex AG
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6dl.dtsi"
+#include "imx6qdl-colibri.dtsi"
+
+/ {
+ /* Will be filled by the bootloader */
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0>;
+ };
+
+ aliases {
+ i2c0 = &i2c2;
+ i2c1 = &i2c3;
+ };
+
+ aliases {
+ rtc0 = &rtc_i2c;
+ rtc1 = &snvs_rtc;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ /* Fixed crystal dedicated to mcp251x */
+ clk16m: clock-16m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16000000>;
+ clock-output-names = "clk16m";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ wakeup {
+ label = "Wake-Up";
+ gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */
+ linux,code = <KEY_WAKEUP>;
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+ };
+
+ lcd_display: disp0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "bgr666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ panel: panel {
+ /*
+ * edt,et057090dhu: EDT 5.7" LCD TFT
+ * edt,et070080dh6: EDT 7.0" LCD TFT
+ */
+ compatible = "edt,et057090dhu";
+ backlight = <&backlight>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+};
+
+&backlight {
+ brightness-levels = <0 127 191 223 239 247 251 255>;
+ default-brightness-level = <1>;
+ status = "okay";
+};
+
+/* Colibri SSP */
+&ecspi4 {
+ status = "okay";
+
+ mcp251x0: mcp251x@0 {
+ compatible = "microchip,mcp2515";
+ reg = <0>;
+ clocks = <&clk16m>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <27 0x2>;
+ spi-max-frequency = <10000000>;
+ status = "okay";
+ };
+};
+
+&hdmi {
+ status = "okay";
+};
+
+/*
+ * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
+ */
+&i2c3 {
+ status = "okay";
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc_i2c: rtc@68 {
+ compatible = "st,m41t0";
+ reg = <0x68>;
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&pwm4 {
+ status = "okay";
+};
+
+&reg_usb_host_vbus {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <&reg_usb_host_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ status = "okay";
+};
+
+&weim {
+ status = "okay";
+
+ /* weim memory map: 32MB on CS0, CS1, CS2 and CS3 */
+ ranges = <0 0 0x08000000 0x02000000
+ 1 0 0x0a000000 0x02000000
+ 2 0 0x0c000000 0x02000000
+ 3 0 0x0e000000 0x02000000>;
+
+ /* SRAM on Colibri nEXT_CS0 */
+ sram@0,0 {
+ compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram";
+ reg = <0 0 0x00010000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+ fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
+ 0x00000000 0x04000040 0x00000000>;
+ };
+
+ /* SRAM on Colibri nEXT_CS1 */
+ sram@1,0 {
+ compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram";
+ reg = <1 0 0x00010000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+ fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
+ 0x00000000 0x04000040 0x00000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-uhs-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-uhs-eval-v3.dts
new file mode 100644
index 000000000000..9a18b5c70752
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-colibri-uhs-eval-v3.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2019 Toradex AG
+ */
+
+/dts-v1/;
+
+#include "imx6dl-colibri-eval-v3.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX6DL/S on Colibri Ev. Board V3 with UHS-I";
+ compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl",
+ "fsl,imx6dl";
+};
+
+/* Colibri MMC with UHS-I support*/
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>;
+ vqmmc-supply = <&vgen3_reg>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+ /delete-property/no-1-8-v;
+};
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 1beac22266ed..8eed89634a45 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -215,7 +215,12 @@
regulator-always-on;
};

- /* vgen3: unused */
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };

vgen4_reg: vgen4 {
regulator-min-microvolt = <1800000>;
@@ -385,12 +390,15 @@
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
+ no-1-8-v;
cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */
disable-wp;
- vqmmc-supply = <&reg_module_3v3>;
+ enable-sdio-wakeup;
+ keep-power-in-suspend;
bus-width = <4>;
- no-1-8-v;
status = "disabled";
+ cap-sd-highspeed;
+ vmmc-supply = <&reg_module_3v3>;
};

/* eMMC */
@@ -698,6 +706,28 @@
>;
};

+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170b1
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100b1
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f1
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f1
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1
+ >;
+ };
+
pinctrl_weim_cs0: weimcs0grp {
fsl,pins = <
/* nEXT_CS0 */
--
2.17.1
\
 
 \ /
  Last update: 2019-04-04 11:20    [W:0.073 / U:11.548 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site