lkml.org 
[lkml]   [2019]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.9 32/41] net/mlx5e: ethtool, Remove unsupported SFP EEPROM high pages query
Date
From: Erez Alfasi <ereza@mellanox.com>

[ Upstream commit ace329f4ab3ba434be2adf618073c752d083b524 ]

Querying EEPROM high pages data for SFP module is currently
not supported by our driver and yet queried, resulting in
invalid FW queries.

Set the EEPROM ethtool data length to 256 for SFP module will
limit the reading for page 0 only and prevent invalid FW queries.

Fixes: bb64143eee8c ("net/mlx5e: Add ethtool support for dump module EEPROM")
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/port.c | 4 ----
2 files changed, 1 insertion(+), 5 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -1365,7 +1365,7 @@ static int mlx5e_get_module_info(struct
break;
case MLX5_MODULE_ID_SFP:
modinfo->type = ETH_MODULE_SFF_8472;
- modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+ modinfo->eeprom_len = MLX5_EEPROM_PAGE_LENGTH;
break;
default:
netdev_err(priv->netdev, "%s: cable type not recognized:0x%x\n",
--- a/drivers/net/ethernet/mellanox/mlx5/core/port.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c
@@ -368,10 +368,6 @@ int mlx5_query_module_eeprom(struct mlx5
size -= offset + size - MLX5_EEPROM_PAGE_LENGTH;

i2c_addr = MLX5_I2C_ADDR_LOW;
- if (offset >= MLX5_EEPROM_PAGE_LENGTH) {
- i2c_addr = MLX5_I2C_ADDR_HIGH;
- offset -= MLX5_EEPROM_PAGE_LENGTH;
- }

MLX5_SET(mcia_reg, in, l, 0);
MLX5_SET(mcia_reg, in, module, module_num);

\
 
 \ /
  Last update: 2019-04-30 14:06    [W:0.472 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site