lkml.org 
[lkml]   [2019]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 2/2] rtc: pcf2127: add battery-low INTn generation
Date
Hi,

> On 03/04/2019 15:49:03+0000, Flavio Suligoi wrote:
> > > Then, you should probably not enable BLIE because this will cause
> issues
> > > with the alarm functionnality.. It is certainly enough to use
> > > RTC_VL_READ periodically.
> >
> > We use the nINT signaling solution because of this pin, in addition
> > to be used by the CPU, can be also connected to an external connector,
> > available for the final user.
> > Anyway, even if the BLIE is set, the sw low voltage alarm works,
> > with the message (displayed about every 12 minutes):
> >
>
> I agree the DT property makes sense when the nINT pin is not connected
> to the CPU. But if it is, then you have an issue that nINT will be
> pulled low until the user changes the battery, meaning that you will
> not get any alarm interrupt anymore, possibly leading to a system that
> is not waking up anymore.

Ah, ok, thanks for the info.
I know this, but in our specific case, this is not a problem,
since we don't use the nINT for other purposes, but only for
a battery low indicator. On the contrary, in our case, it's better
that the alarm signal remains low until the battery is changed.

Anyway, I can specify this collateral effect in a specific file for the
Pcf2127 in the DT bindings Documentation. What do you think?


Flavio Suligoi

\
 
 \ /
  Last update: 2019-04-03 18:09    [W:2.131 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site