lkml.org 
[lkml]   [2019]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/5] dt-bindings: ti-lmu: Modify dt bindings for the LM3697
From
Date
Hi Dan,

Thank you for the patch.

You need Lee Jones on CC for this series.

One more comment below.

On 3/25/19 3:24 PM, Dan Murphy wrote:
> The LM3697 is a single function LED driver. The single function LED
> driver needs to reside in the LED directory as a dedicated LED driver
> and not as a MFD device. The device does have common brightness and ramp
> features and those can be accomodated by a TI LMU framework.
>
> The LM3697 dt binding needs to be moved from the ti-lmu.txt and a dedicated
> LED dt binding needs to be added. The new LM3697 LED dt binding will then
> reside in the Documentation/devicetree/bindings/leds directory and follow the
> current LED and general bindings guidelines.
>
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
> .../devicetree/bindings/leds/leds-lm3697.txt | 77 +++++++++++++++++++
> .../devicetree/bindings/mfd/ti-lmu.txt | 26 +------
> 2 files changed, 78 insertions(+), 25 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/leds/leds-lm3697.txt
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-lm3697.txt b/Documentation/devicetree/bindings/leds/leds-lm3697.txt
> new file mode 100644
> index 000000000000..a780f11acd38
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-lm3697.txt
> @@ -0,0 +1,77 @@
> +* Texas Instruments - LM3697 Highly Efficient White LED Driver
> +
> +The LM3697 11-bit LED driver provides high-
> +performance backlight dimming for 1, 2, or 3 series
> +LED strings while delivering up to 90% efficiency.
> +
> +This device is suitable for display and keypad Lighting
> +
> +Required properties:
> + - compatible:
> + "ti,lm3697"
> + - reg : I2C slave address
> + - #address-cells : 1
> + - #size-cells : 0
> +
> +Optional properties:
> + - enable-gpios : GPIO pin to enable/disable the device
> + - vled-supply : LED supply
> +
> +Required child properties:
> + - reg : 0 - LED is Controlled by bank A
> + 1 - LED is Controlled by bank B
> + - led-sources : Indicates which HVLED string is associated to which
> + control bank. This is a zero based property so
> + HVLED1 = 0, HVLED2 = 1, HVLED3 = 2.
> + Additional information is contained
> + in Documentation/devicetree/bindings/leds/common.txt
> +
> +Optional child properties:
> + - max_brightness - This determines whether to use 8 bit brightness mode
> + or 11 bit brightness mode. If this value is not
> + set the device is defaulted to the preferred 8bit
> + brightness mode per 7.3.4.1 of the data sheet.
> + The values are 255 (8bit) or 2047 (11bit).

We should use led-max-microamp for that, if possible.

--
Best regards,
Jacek Anaszewski

\
 
 \ /
  Last update: 2019-04-03 22:11    [W:0.226 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site