lkml.org 
[lkml]   [2019]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH v2 1/5] usb: dwc2: bus suspend/resume for hosts with DWC2_POWER_DOWN_PARAM_NONE
Date
Hi,

On 4/18/2019 04:15, Douglas Anderson wrote:
> This is an attempt to rehash commit 0cf884e819e0 ("usb: dwc2: add bus
> suspend/resume for dwc2") on ToT. That commit was reverted in commit
> b0bb9bb6ce01 ("Revert "usb: dwc2: add bus suspend/resume for dwc2"")
> because apparently it broke the Altera SOCFPGA.
>
> With all the changes that have happened to dwc2 in the meantime, it's
> possible that the Altera SOCFPGA will just magically work with this
> change now. ...and it would be good to get bus suspend/resume
> implemented.
>
> This change is a forward port of one that's been living in the Chrome
> OS 3.14 kernel tree.
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---
> This patch was last posted at:
>
> https://urldefense.proofpoint.com/v2/url?u=https-3A__lkml.kernel.org_r_1446237173-2D15263-2D1-2Dgit-2Dsend-2Demail-2Ddianders-40chromium.org&d=DwIDAg&c=DPL6_X_6JkXFx7AXWqB0tg&r=9hPBFKCJ_nBjJhGVrrlYOeOQjP_HlVzYqrC_D7niMJI&m=MMfe-4lZePyty6F5zfQ54kiYGuJWNulyRat944LkOsc&s=nExFpAPP_0plZfO5LMG1B-mqt1vyCvE35elVcyVgs8Y&e=
>
> ...and appears to have died the death of silence. Maybe it could get
> some bake time in linuxnext if we can't find any proactive testing?
>
> I will also freely admit that I don't know tons about the theory
> behind this patch. I'm mostly just re-hashing the original commit
> from Kever that was reverted since:
> * Turning on partial power down on rk3288 doesn't "just work". I
> don't get hotplug events. This is despite dwc2 auto-detecting that
> we are power optimized.
What do you mean by doesn't "just work" ? It seem to me that even after
adding this patch you don't get issues fixed.
You mention that you don't get the hotplug events. Please provide dwc2
debug logs and register dumps on this issue.

> * If we don't do something like this commit we don't get into as low
> of a power mode.
>
> Changes in v2: None
>
> drivers/usb/dwc2/hcd.c | 84 ++++++++++++++++++++++++++----------------
> 1 file changed, 53 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
> index e272d020012e..978232a9e4a8 100644
> --- a/drivers/usb/dwc2/hcd.c
> +++ b/drivers/usb/dwc2/hcd.c
> @@ -4482,6 +4482,7 @@ static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
> unsigned long flags;
> int ret = 0;
> u32 hprt0;
> + u32 pcgctl;
>
> spin_lock_irqsave(&hsotg->lock, flags);
>
> @@ -4497,7 +4498,7 @@ static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
> if (hsotg->op_state == OTG_STATE_B_PERIPHERAL)
> goto unlock;
>
> - if (hsotg->params.power_down != DWC2_POWER_DOWN_PARAM_PARTIAL)
> + if (hsotg->params.power_down > DWC2_POWER_DOWN_PARAM_PARTIAL)
> goto skip_power_saving;
>

"hsotg->params.power_down" is assigned to "DWC2_POWER_DOWN_PARAM_NONE =
0" if there is no hibernation or partial power down supported by the
core or power saving features are disabled by
"hsotg->params.power_saving = false" , "DWC2_POWER_DOWN_PARAM_PARTIAL"
if core supports partial power down, "DWC2_POWER_DOWN_PARAM_HIBERNATION
" if the core supports hibernation

When you check "if (hsotg->params.power_down >
DWC2_POWER_DOWN_PARAM_PARTIAL)" you are saying that "skip_power_saving"
only in that case when core supports Hibernation. But what if core
doesn't support both hibernation and partial power down and the
"hsotg->params.power_down" value us equal to
"DWC2_POWER_DOWN_PARAM_NONE" which is 0.

With this implementation driver will program entering to suspend when
core doesn't support both hibernation and partial power down.

> /*
> @@ -4506,21 +4507,35 @@ static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
> */
> if (!hsotg->bus_suspended) {
> hprt0 = dwc2_read_hprt0(hsotg);
> - hprt0 |= HPRT0_SUSP;
> - hprt0 &= ~HPRT0_PWR;
> - dwc2_writel(hsotg, hprt0, HPRT0);
> - spin_unlock_irqrestore(&hsotg->lock, flags);
> - dwc2_vbus_supply_exit(hsotg);
> - spin_lock_irqsave(&hsotg->lock, flags);
> + if (hprt0 & HPRT0_CONNSTS) { > + hprt0 |= HPRT0_SUSP;
Here you set "HPRT0_SUSP" bit but what if core doesn't support both
hibernation and Partial Power down assuming that
hsotg->params.power_down" value us equal to "DWC2_POWER_DOWN_PARAM_NONE"
which is 0.
> + if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL)
You make one checking of hsotg->params.power_down mode here.
> + hprt0 &= ~HPRT0_PWR;
> + dwc2_writel(hsotg, hprt0, HPRT0);
> + }
> + if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL) {
another checking of power_down mode here.
> + spin_unlock_irqrestore(&hsotg->lock, flags);
> + dwc2_vbus_supply_exit(hsotg);
> + spin_lock_irqsave(&hsotg->lock, flags);
> + } else {
> + pcgctl = readl(hsotg->regs + PCGCTL);
> + pcgctl |= PCGCTL_STOPPCLK;
> + writel(pcgctl, hsotg->regs + PCGCTL);
"PCGCTL_STOPPCLK" bit is set only when core enters to partial power
down. So here if hsotg->params.power_down is not equal to
DWC2_POWER_DOWN_PARAM_PARTIAL and is DWC2_POWER_DOWN_PARAM_NONE the the
bit will be set.
> + }
> }
>
> - /* Enter partial_power_down */
> - ret = dwc2_enter_partial_power_down(hsotg);
> - if (ret) {
> - if (ret != -ENOTSUPP)
> - dev_err(hsotg->dev,
> - "enter partial_power_down failed\n");
> - goto skip_power_saving;
> + if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL) {
one more power_down mode checking here.
I understand that those checking are to make sure that we got partial
power down mode enabled but before this patch it was done with one checking.
> + /* Enter partial_power_down */
> + ret = dwc2_enter_partial_power_down(hsotg);
> + if (ret) {
> + if (ret != -ENOTSUPP)
> + dev_err(hsotg->dev,
> + "enter partial_power_down failed\n");
> + goto skip_power_saving;
> + }
> +
> + /* After entering partial_power_down, hardware is no more accessible */
> + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
> }
>
> /* Ask phy to be suspended */
> @@ -4530,9 +4545,6 @@ static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
> spin_lock_irqsave(&hsotg->lock, flags);
> }
>
> - /* After entering partial_power_down, hardware is no more accessible */
> - clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
> -
> skip_power_saving:
> hsotg->lx_state = DWC2_L2;
> unlock:
> @@ -4545,6 +4557,7 @@ static int _dwc2_hcd_resume(struct usb_hcd *hcd)
> {
> struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
> unsigned long flags;
> + u32 pcgctl;
> int ret = 0;
>
> spin_lock_irqsave(&hsotg->lock, flags);
> @@ -4555,17 +4568,11 @@ static int _dwc2_hcd_resume(struct usb_hcd *hcd)
> if (hsotg->lx_state != DWC2_L2)
> goto unlock;
>
> - if (hsotg->params.power_down != DWC2_POWER_DOWN_PARAM_PARTIAL) {
> + if (hsotg->params.power_down > DWC2_POWER_DOWN_PARAM_PARTIAL) {
> hsotg->lx_state = DWC2_L0;
> goto unlock;
> }
>
> - /*
> - * Set HW accessible bit before powering on the controller
> - * since an interrupt may rise.
> - */
> - set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
> -
> /*
> * Enable power if not already done.
> * This must not be spinlocked since duration
> @@ -4577,10 +4584,23 @@ static int _dwc2_hcd_resume(struct usb_hcd *hcd)
> spin_lock_irqsave(&hsotg->lock, flags);
> }
>
> - /* Exit partial_power_down */
> - ret = dwc2_exit_partial_power_down(hsotg, true);
> - if (ret && (ret != -ENOTSUPP))
> - dev_err(hsotg->dev, "exit partial_power_down failed\n");
> + if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL) {
> + /*
> + * Set HW accessible bit before powering on the controller
> + * since an interrupt may rise.
> + */
> + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
> +
> +
you leave an odd blank line here. Please delete it.
> + /* Exit partial_power_down */
> + ret = dwc2_exit_partial_power_down(hsotg, true);
> + if (ret && (ret != -ENOTSUPP))
> + dev_err(hsotg->dev, "exit partial_power_down failed\n");
> + } else {
> + pcgctl = readl(hsotg->regs + PCGCTL);
> + pcgctl &= ~PCGCTL_STOPPCLK;
> + writel(pcgctl, hsotg->regs + PCGCTL);

Here if core doesn't support both hibernation and partial power down
and "hsotg->params.power_down" is equal to "DWC2_POWER_DOWN_PARAM_NONE"
which is 0 then "PCGCTL_STOPPCLK" bit is unset.

> + }
>
> hsotg->lx_state = DWC2_L0;
>
> @@ -4592,10 +4612,12 @@ static int _dwc2_hcd_resume(struct usb_hcd *hcd)
> spin_unlock_irqrestore(&hsotg->lock, flags);
> dwc2_port_resume(hsotg);
> } else {
> - dwc2_vbus_supply_init(hsotg);
> + if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_PARTIAL) {
> + dwc2_vbus_supply_init(hsotg);
>
> - /* Wait for controller to correctly update D+/D- level */
> - usleep_range(3000, 5000);
> + /* Wait for controller to correctly update D+/D- level */
> + usleep_range(3000, 5000);
> + }
>
> /*
> * Clear Port Enable and Port Status changes.
>

I have tested the patch on HAPS-DX. With this patch or without it when I
have a device connected core enters to partial power down and doesn't
exit from it. So I cannot use the device.

--
Regards,
Artur

\
 
 \ /
  Last update: 2019-04-29 10:44    [W:0.281 / U:12.152 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site