lkml.org 
[lkml]   [2019]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patches in this message
/
SubjectRe: [Bug 203297] Synaptics touchpad TM-3127 functionality broken by PCI runtime power management patch on 4.20.2
From
Date
On 4/29/19 10:45 AM, Benjamin Tissoires wrote:
>> I would like to ask help from input subsystem experts what kind of SMBus
>> power state dependency Synaptics RMI4 SMBus devices have since it cease
>> to work if SMBus controllers idles between transfers and how this is
>> best to fix?
>
> Hmm, I am not sure there is such an existing architecture you could
> use in a simple patch.
>
> rmi-driver.c does indeed create an input device we could use to toggle
> on/off the PM state, but those callbacks are not wired to the
> transport driver (rmi_smbus.c), so it would required a little bit of
> extra work. And then, there are other RMI4 functions (firmware
> upgrade) that would not be happy if PM is in suspend while there is no
> open input node.
>
I see.

I got another thought about this. I noticed these input drivers need
SMBus Host Notify, maybe that explain the PM dependency? If that's the
only dependency then we could prevent the controller suspend if there is
a client needing host notify mechanism. IMHO that's less hack than the
patch to rmi_smbus.c.

Keijo: care to test does this idea would fix the issue (without the
previous patch)? I also attached the diff.

diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 38af18645133..d54eafad7727 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -327,6 +327,8 @@ static int i2c_device_probe(struct device *dev)

if (client->flags & I2C_CLIENT_HOST_NOTIFY) {
dev_dbg(dev, "Using Host Notify IRQ\n");
+ /* Adapter should not suspend for Host Notify */
+ pm_runtime_get_sync(&client->adapter->dev);
irq = i2c_smbus_host_notify_to_irq(client);
} else if (dev->of_node) {
irq = of_irq_get_byname(dev->of_node, "irq");
@@ -431,6 +433,8 @@ static int i2c_device_remove(struct device *dev)
device_init_wakeup(&client->dev, false);

client->irq = client->init_irq;
+ if (client->flags & I2C_CLIENT_HOST_NOTIFY)
+ pm_runtime_put(&client->adapter->dev);

return status;
}
> So I think this "hack" (with Mika's comments addressed) should go in
> until someone starts propagating the PM states correctly.
>
I guess you mean the Rafael's pm_runtime_get_sync() comment?

--
Jarkko
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 38af18645133..d54eafad7727 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -327,6 +327,8 @@ static int i2c_device_probe(struct device *dev)

if (client->flags & I2C_CLIENT_HOST_NOTIFY) {
dev_dbg(dev, "Using Host Notify IRQ\n");
+ /* Adapter should not suspend for Host Notify */
+ pm_runtime_get_sync(&client->adapter->dev);
irq = i2c_smbus_host_notify_to_irq(client);
} else if (dev->of_node) {
irq = of_irq_get_byname(dev->of_node, "irq");
@@ -431,6 +433,8 @@ static int i2c_device_remove(struct device *dev)
device_init_wakeup(&client->dev, false);

client->irq = client->init_irq;
+ if (client->flags & I2C_CLIENT_HOST_NOTIFY)
+ pm_runtime_put(&client->adapter->dev);

return status;
}
\
 
 \ /
  Last update: 2019-04-29 10:38    [W:0.080 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site