lkml.org 
[lkml]   [2019]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] arm64: dts: qcom: Fully describe the CDSP
On 24-03-19, 10:20, Bjorn Andersson wrote:

It would have been great to explain the change and why we are moving the
node :)

> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/qcs404.dtsi | 88 ++++++++++++++++++----------
> 1 file changed, 57 insertions(+), 31 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> index f62cd09d965e..c20425aa9ed9 100644
> --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> @@ -113,37 +113,6 @@
> };
> };
>
> - remoteproc_cdsp: remoteproc-cdsp {
> - compatible = "qcom,qcs404-cdsp-pas";
> -
> - interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
> - <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> - <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> - <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> - <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> - interrupt-names = "wdog", "fatal", "ready",
> - "handover", "stop-ack";
> -
> - clocks = <&xo_board>;
> - clock-names = "xo";
> -
> - memory-region = <&cdsp_fw_mem>;
> -
> - qcom,smem-states = <&cdsp_smp2p_out 0>;
> - qcom,smem-state-names = "stop";
> -
> - status = "disabled";
> -
> - glink-edge {
> - interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
> -
> - qcom,remote-pid = <5>;
> - mboxes = <&apcs_glb 12>;
> -
> - label = "cdsp";
> - };
> - };
> -
> remoteproc_wcss: remoteproc-wcss {
> compatible = "qcom,qcs404-wcss-pas";
>
> @@ -288,6 +257,57 @@
> clock-names = "core";
> };
>
> + remoteproc_cdsp: remoteproc@b00000 {
> + compatible = "qcom,qcs404-cdsp-pas";
> + reg = <0x00b00000 0x4040>;
> +
> + interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
> + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
> +
> + clocks = <&xo_board>,
> + <&gcc GCC_CDSP_CFG_AHB_CLK>,
> + <&gcc GCC_CDSP_TBU_CLK>,
> + <&gcc GCC_BIMC_CDSP_CLK>,
> + <&turingcc TURING_WRAPPER_AON_CLK>,
> + <&turingcc TURING_Q6SS_AHBS_AON_CLK>,
> + <&turingcc TURING_Q6SS_AHBM_AON_CLK>,
> + <&turingcc TURING_Q6SS_Q6_AXIM_CLK>;
> + clock-names = "xo",
> + "sway",
> + "tbu",
> + "bimc",
> + "ahb_aon",
> + "q6ss_slave",
> + "q6ss_master",
> + "q6_axim";
> +
> + resets = <&gcc GCC_CDSP_RESTART>;
> + reset-names = "restart";
> +
> + qcom,halt-regs = <&tcsr 0x19004>;
> +
> + memory-region = <&cdsp_fw_mem>;
> +
> + qcom,smem-states = <&cdsp_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
> +
> + qcom,remote-pid = <5>;
> + mboxes = <&apcs_glb 12>;
> +
> + label = "cdsp";
> + };
> + };
> +
> usb3_phy: phy@78000 {
> compatible = "qcom,usb-ssphy";
> reg = <0x78000 0x400>;
> @@ -506,6 +526,7 @@
> compatible = "qcom,gcc-qcs404";
> reg = <0x01800000 0x80000>;
> #clock-cells = <1>;
> + #reset-cells = <1>;

Shouldn't this be a separate patch?

>
> assigned-clocks = <&gcc GCC_APSS_AHB_CLK_SRC>;
> assigned-clock-rates = <19200000>;
> @@ -516,6 +537,11 @@
> reg = <0x01905000 0x20000>;
> };
>
> + tcsr: syscon@1937000 {
> + compatible = "syscon";
> + reg = <0x01937000 0x25000>;
> + };
> +

This too..

> spmi_bus: spmi@200f000 {
> compatible = "qcom,spmi-pmic-arb";
> reg = <0x0200f000 0x001000>,
> --
> 2.18.0

--
~Vinod

\
 
 \ /
  Last update: 2019-04-27 10:20    [W:0.051 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site