lkml.org 
[lkml]   [2019]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 3.16 175/202] mmc: tmio_mmc_core: don't claim spurious interrupts
3.16.66-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

commit 5c27ff5db1491a947264d6d4e4cbe43ae6535bae upstream.

I have encountered an interrupt storm during the eMMC chip probing (and
the chip finally didn't get detected). It turned out that U-Boot left
the DMAC interrupts enabled while the Linux driver didn't use those.
The SDHI driver's interrupt handler somehow assumes that, even if an
SDIO interrupt didn't happen, it should return IRQ_HANDLED. I think
that if none of the enabled interrupts happened and got handled, we
should return IRQ_NONE -- that way the kernel IRQ code recoginizes
a spurious interrupt and masks it off pretty quickly...

Fixes: 7729c7a232a9 ("mmc: tmio: Provide separate interrupt handlers")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[bwh: Backported to 3.16:
- tmio_mmc_sdio_irq() can be used directly as an interrupt handler, so
make it return IRQ_NONE for unhandled interrupts
- Adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -639,7 +639,7 @@ irqreturn_t tmio_mmc_sdio_irq(int irq, v
unsigned int ireg, status;

if (!(pdata->flags & TMIO_MMC_SDIO_IRQ))
- return IRQ_HANDLED;
+ return IRQ_NONE;

status = sd_ctrl_read16(host, CTL_SDIO_STATUS);
ireg = status & TMIO_SDIO_MASK_ALL & ~host->sdcard_irq_mask;
@@ -649,7 +649,7 @@ irqreturn_t tmio_mmc_sdio_irq(int irq, v
if (mmc->caps & MMC_CAP_SDIO_IRQ && ireg & TMIO_SDIO_STAT_IOIRQ)
mmc_signal_sdio_irq(mmc);

- return IRQ_HANDLED;
+ return ireg ? IRQ_HANDLED : IRQ_NONE;
}
EXPORT_SYMBOL(tmio_mmc_sdio_irq);

@@ -666,9 +666,7 @@ irqreturn_t tmio_mmc_irq(int irq, void *
if (__tmio_mmc_sdcard_irq(host, ireg, status))
return IRQ_HANDLED;

- tmio_mmc_sdio_irq(irq, devid);
-
- return IRQ_HANDLED;
+ return tmio_mmc_sdio_irq(irq, devid);
}
EXPORT_SYMBOL(tmio_mmc_irq);

\
 
 \ /
  Last update: 2019-04-27 17:18    [W:1.065 / U:3.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site