lkml.org 
[lkml]   [2019]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 12/15] kvm/vmx: Emulate MSR TEST_CTL
From
Date
On Thu, 2019-04-25 at 09:42 +0200, Thomas Gleixner wrote:
> On Wed, 24 Apr 2019, Fenghua Yu wrote:
> >
> > +static void atomic_switch_msr_test_ctl(struct vcpu_vmx *vmx)
> > +{
> > + u64 host_msr_test_ctl;
> > +
> > + if (!boot_cpu_has(X86_FEATURE_SPLIT_LOCK_DETECT))
> > + return;
>
> Again: MSR_TST_CTL is not only about LOCK_DETECT. Check the control mask.
>
> > + host_msr_test_ctl = this_cpu_read(msr_test_ctl_cache);
> > +
> > + if (host_msr_test_ctl == vmx->msr_test_ctl) {
>
> This still assumes that the only bit which can be set in the MSR is that
> lock detect bit.
>
> > + clear_atomic_switch_msr(vmx, MSR_TEST_CTL);
> > + } else {
> > + add_atomic_switch_msr(vmx, MSR_TEST_CTL, vmx->msr_test_ctl,
> > + host_msr_test_ctl, false);
>
> So what happens here is that if any other bit is set on the host, VMENTER
> will happily clear it.

There are two bits of MSR TEST_CTL defined in Intel SDM now, which is bit 29 and
bit 31. Bit 31 is not used in kernel, and here we only need to switch bit 29
between host and guest.
So should I also change the name to atomic_switch_split_lock_detect() to
indicate that we only switch bit 29?

> guest = (host & ~vmx->test_ctl_mask) | vmx->test_ctl;
>
> That preserves any bits which are not exposed to the guest.
>
> But the way more interesting question is why are you exposing the MSR and
> the bit to the guest at all if the host has split lock detection enabled?
>
> That does not make any sense as you basically allow the guest to switch it
> off and then launch a slowdown attack. If the host has it enabled, then a
> guest has to be treated like any other process and the #AC trap has to be
> caught by the hypervisor which then kills the guest.
>
> Only if the host has split lock detection disabled, then you can expose it
> and allow the guest to turn it on and handle it on its own.

Indeed, if we use split lock detection for protection purpose, when host has it
enabled we should directly pass it to guest and forbid guest from disabling it.
And only when host disables split lock detection, we can expose it and allow the
guest to turn it on.

If it is used for protection purpose, then it should follow what you said and
this feature needs to be disabled by default. Because there are split lock
issues in old/current kernels and BIOS. That will cause the existing guest
booting failure and killed due to those split lock.

If it is only used for debug purpose, I think it might be OK to enable this
feature by default and make it indepedent between host and guest?

So I think how to handle this feature between host and guest depends on how we
use it? Once you give me a decision, I will follow it in next version.

> Thanks,
>
> tglx
>
>

\
 
 \ /
  Last update: 2019-04-27 14:25    [W:0.103 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site