lkml.org 
[lkml]   [2019]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 6/9] dt-bindings: display: hdmi-connector: Add DDC power supply
On Sat, Apr 13, 2019 at 06:54:15PM +0200, megous@megous.com wrote:
> From: Ondrej Jirman <megous@megous.com>
>
> Some Allwinner SoC using boards (Orange Pi 3 for example) need to enable
> on-board voltage shifting logic for the DDC bus to be usable. Use
> ddc-supply on the hdmi-connector to model this.
>
> Add binding documentation for optional ddc-supply property.
>
> Signed-off-by: Ondrej Jirman <megous@megous.com>
> ---
> .../devicetree/bindings/display/connector/hdmi-connector.txt | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt b/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt
> index 508aee461e0d..33085aeb0bb9 100644
> --- a/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt
> +++ b/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt
> @@ -9,6 +9,7 @@ Optional properties:
> - label: a symbolic name for the connector
> - hpd-gpios: HPD GPIO number
> - ddc-i2c-bus: phandle link to the I2C controller used for DDC EDID probing
> +- ddc-supply: the power supply for the DDC bus

It's not just for DDC. It powers the chips in bridge dongles for
example. Pretty much every diagram I find just calls it 5V or +5V.

So how about '5V-supply' or 'v5V-supply'?

Rob

\
 
 \ /
  Last update: 2019-04-26 20:24    [W:0.157 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site