lkml.org 
[lkml]   [2019]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/3] power: supply: Add driver for Microchip UCS1002
Hi Andrey,

Many thanks to push this upstream. Actually this the fifth version [1]
of this patchset. I think that is interesting for the maintainers
maintain the history and the changelog.

[1] https://lkml.org/lkml/2016/3/14/233

Missatge de Andrey Smirnov <andrew.smirnov@gmail.com> del dia dc., 17
d’abr. 2019 a les 10:46:
>
> Add driver for Microchip UCS1002 Programmable USB Port Power
> Controller with Charger Emulation. The driver exposed a power supply
> device to control/monitor various parameter of the device as well as a
> regulator to allow controlling VBUS line.
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> Cc: Chris Health <cphealy@gmail.com>
> Cc: Lucas Stach <l.stach@pengutronix.de>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Cc: Sebastian Reichel <sre@kernel.org>
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-pm@vger.kernel.org
> ---
> drivers/power/supply/Kconfig | 9 +
> drivers/power/supply/Makefile | 1 +
> drivers/power/supply/ucs1002_power.c | 639 +++++++++++++++++++++++++++
> 3 files changed, 649 insertions(+)
> create mode 100644 drivers/power/supply/ucs1002_power.c
>
> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index e901b9879e7e..c614c8a196f3 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -660,4 +660,13 @@ config FUEL_GAUGE_SC27XX
> Say Y here to enable support for fuel gauge with SC27XX
> PMIC chips.
>
> +config CHARGER_UCS1002
> + tristate "Microchip UCS1002 USB Port Power Controller"
> + depends on I2C
> + depends on OF
> + select REGMAP_I2C
> + help
> + Say Y to enable support for Microchip UCS1002 Programmable
> + USB Port Power Controller with Charger Emulation.
> +
> endif # POWER_SUPPLY
> diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
> index b731c2a9b695..c56803a9e4fe 100644
> --- a/drivers/power/supply/Makefile
> +++ b/drivers/power/supply/Makefile
> @@ -87,3 +87,4 @@ obj-$(CONFIG_AXP288_CHARGER) += axp288_charger.o
> obj-$(CONFIG_CHARGER_CROS_USBPD) += cros_usbpd-charger.o
> obj-$(CONFIG_CHARGER_SC2731) += sc2731_charger.o
> obj-$(CONFIG_FUEL_GAUGE_SC27XX) += sc27xx_fuel_gauge.o
> +obj-$(CONFIG_CHARGER_UCS1002) += ucs1002_power.o
> diff --git a/drivers/power/supply/ucs1002_power.c b/drivers/power/supply/ucs1002_power.c
> new file mode 100644
> index 000000000000..b0b81d62e003
> --- /dev/null
> +++ b/drivers/power/supply/ucs1002_power.c
> @@ -0,0 +1,639 @@
> +// SPDX-License-Identifier: GPL-2.0+

There is a license mismatch, or this should be GPL-2.0 or
MODULE_LICENCE should GPL.

> +/*
> + * Driver for UCS1002 Programmable USB Port Power Controller
> + *
> + * Copyright (C) 2019 Zodiac Inflight Innovations
> + */
> +#include <linux/freezer.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/kthread.h>
> +#include <linux/device.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/power_supply.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/of_regulator.h>
> +
> +/* UCS1002 Registers */
> +#define UCS1002_REG_CURRENT_MEASUREMENT 0x00
> +
> +/*
> + * The Total Accumulated Charge registers store the total accumulated
> + * charge delivered from the VS source to a portable device. The total
> + * value is calculated using four registers, from 01h to 04h. The bit
> + * weighting of the registers is given in mA/hrs.
> + */
> +#define UCS1002_REG_TOTAL_ACC_CHARGE 0x01
> +
> +/* Other Status Register */
> +#define UCS1002_REG_OTHER_STATUS 0x0f
> +# define F_ADET_PIN BIT(4)
> +# define F_CHG_ACT BIT(3)
> +
> +/* Interrupt Status */
> +#define UCS1002_REG_INTERRUPT_STATUS 0x10
> +# define F_DISCHARGE_ERR BIT(6)
> +# define F_RESET BIT(5)
> +# define F_MIN_KEEP_OUT BIT(4)
> +# define F_TSD BIT(3)
> +# define F_OVER_VOLT BIT(2)
> +# define F_BACK_VOLT BIT(1)
> +# define F_OVER_ILIM BIT(0)
> +
> +/* Pin Status Register */
> +#define UCS1002_REG_PIN_STATUS 0x14
> +# define UCS1002_PWR_STATE_MASK 0x03
> +# define F_PWR_EN_PIN BIT(6)
> +# define F_M2_PIN BIT(5)
> +# define F_M1_PIN BIT(4)
> +# define F_EM_EN_PIN BIT(3)
> +# define F_SEL_PIN BIT(2)
> +# define F_ACTIVE_MODE_MASK GENMASK(5, 3)
> +# define F_ACTIVE_MODE_PASSTHROUGH F_M2_PIN
> +# define F_ACTIVE_MODE_DEDICATED F_EM_EN_PIN
> +# define F_ACTIVE_MODE_BC12_DCP (F_M2_PIN | F_EM_EN_PIN)
> +# define F_ACTIVE_MODE_BC12_SDP F_M1_PIN
> +# define F_ACTIVE_MODE_BC12_CDP (F_M1_PIN | F_M2_PIN | F_EM_EN_PIN)
> +
> +/* General Configuration Register */
> +#define UCS1002_REG_GENERAL_CFG 0x15
> +# define F_RATION_EN BIT(3)
> +
> +/* Emulation Configuration Register */
> +#define UCS1002_REG_EMU_CFG 0x16
> +
> +/* Switch Configuration Register */
> +#define UCS1002_REG_SWITCH_CFG 0x17
> +# define F_PIN_IGNORE BIT(7)
> +# define F_EM_EN_SET BIT(5)
> +# define F_M2_SET BIT(4)
> +# define F_M1_SET BIT(3)
> +# define F_S0_SET BIT(2)
> +# define F_PWR_EN_SET BIT(1)
> +# define F_LATCH_SET BIT(0)
> +# define V_SET_ACTIVE_MODE_MASK GENMASK(5, 3)
> +# define V_SET_ACTIVE_MODE_PASSTHROUGH F_M2_SET
> +# define V_SET_ACTIVE_MODE_DEDICATED F_EM_EN_SET
> +# define V_SET_ACTIVE_MODE_BC12_DCP (F_M2_SET | F_EM_EN_SET)
> +# define V_SET_ACTIVE_MODE_BC12_SDP F_M1_SET
> +# define V_SET_ACTIVE_MODE_BC12_CDP (F_M1_SET | F_M2_SET | F_EM_EN_SET)
> +
> +/* Current Limit Register */
> +#define UCS1002_REG_ILIMIT 0x19
> +# define UCS1002_ILIM_SW_MASK GENMASK(3, 0)
> +
> +/* Product ID */
> +#define UCS1002_REG_PRODUCT_ID 0xfd
> +# define UCS1002_PRODUCT_ID 0x4e
> +
> +/* Manufacture name */
> +#define UCS1002_MANUFACTURER "SMSC"
> +
> +struct ucs1002_info {
> + struct power_supply *charger;
> + struct i2c_client *client;
> + struct regmap *regmap;
> + struct regulator_desc *regulator_descriptor;
> + bool present;
> +};
> +
> +static enum power_supply_property ucs1002_props[] = {
> + POWER_SUPPLY_PROP_ONLINE,
> + POWER_SUPPLY_PROP_CHARGE_NOW,
> + POWER_SUPPLY_PROP_CURRENT_NOW,
> + POWER_SUPPLY_PROP_CURRENT_MAX,
> + POWER_SUPPLY_PROP_PRESENT, /* the presence of PED */
> + POWER_SUPPLY_PROP_MANUFACTURER,
> + POWER_SUPPLY_PROP_USB_TYPE,
> + POWER_SUPPLY_PROP_HEALTH,
> +};
> +
> +static int ucs1002_get_online(struct ucs1002_info *info,
> + union power_supply_propval *val)
> +{
> + unsigned int reg;
> + int ret;
> +
> + ret = regmap_read(info->regmap, UCS1002_REG_OTHER_STATUS, &reg);
> + if (ret)
> + return ret;
> +
> + val->intval = !!(reg & F_CHG_ACT);
> +
> + return 0;
> +}
> +
> +static int ucs1002_get_charge(struct ucs1002_info *info,
> + union power_supply_propval *val)
> +{
> + /*
> + * To fit within 32 bits some values are rounded (uA/h)
> + *
> + * For Total Accumulated Charge Middle Low Byte register, addr
> + * 03h, byte 2
> + *
> + * B0: 0.01084 mA/h rounded to 11 uA/h
> + * B1: 0.02169 mA/h rounded to 22 uA/h
> + * B2: 0.04340 mA/h rounded to 43 uA/h
> + * B3: 0.08676 mA/h rounded to 87 uA/h
> + * B4: 0.17350 mA/h rounded to 173 uÁ/h
> + *
> + * For Total Accumulated Charge Low Byte register, addr 04h,
> + * byte 3
> + *
> + * B6: 0.00271 mA/h rounded to 3 uA/h
> + * B7: 0.005422 mA/h rounded to 5 uA/h
> + */
> + static const int bit_weights_uAh[BITS_PER_TYPE(u32)] = {
> + 0, 0, 0, 0, 0, 0, 3, 5,
> +

nit: I personally don't like these empty lines here.

> + 11, 22, 43, 87, 173, 347, 694, 1388,
> +
> + 2776, 5552, 11105, 22210, 44420, 88840, 177700, 355400,
> +
> + 710700, 1421000, 2843000, 5685000, 11371000, 22742000,
> + 45484000, 90968000,
> + };
> + unsigned long total_acc_charger;
> + unsigned int reg;
> + int i, ret;
> +
> + ret = regmap_bulk_read(info->regmap, UCS1002_REG_TOTAL_ACC_CHARGE,
> + &reg, sizeof(u32));
> + if (ret)
> + return ret;
> +
> + total_acc_charger = be32_to_cpu(reg);
> + val->intval = 0;
> +
> + for_each_set_bit(i, &total_acc_charger, ARRAY_SIZE(bit_weights_uAh))
> + val->intval += bit_weights_uAh[i];
> +
> + return 0;
> +}
> +
> +static int ucs1002_get_current(struct ucs1002_info *info,
> + union power_supply_propval *val)
> +{
> + /*
> + * The Current Measurement register stores the measured
> + * current value delivered to the portable device. The range
> + * is from 9.76 mA to 2.5 A.
> + */
> + static const int bit_weights_uA[BITS_PER_TYPE(u8)] = {
> + 9760, 19500, 39000, 78100, 156200, 312300, 624600, 1249300,
> + };
> + unsigned long current_measurement;
> + unsigned int reg;
> + int i, ret;
> +
> + ret = regmap_read(info->regmap, UCS1002_REG_CURRENT_MEASUREMENT, &reg);
> + if (ret)
> + return ret;
> +
> + current_measurement = reg;
> + val->intval = 0;
> +
> + for_each_set_bit(i, &current_measurement, ARRAY_SIZE(bit_weights_uA))
> + val->intval += bit_weights_uA[i];
> +
> + return 0;
> +}
> +
> +/*
> + * The Current Limit register stores the maximum current used by the
> + * port switch. The range is from 500mA to 2.5 A.
> + */
> +static const u32 ucs1002_current_limit_uA[] = {
> + 500000, 900000, 1000000, 1200000, 1500000, 1800000, 2000000, 2500000,
> +};
> +
> +static int ucs1002_get_max_current(struct ucs1002_info *info,
> + union power_supply_propval *val)
> +{
> + unsigned int reg;
> + int ret;
> +
> + ret = regmap_read(info->regmap, UCS1002_REG_ILIMIT, &reg);
> + if (ret)
> + return ret;
> +
> + val->intval = ucs1002_current_limit_uA[reg & UCS1002_ILIM_SW_MASK];
> +
> + return 0;
> +}
> +
> +static int ucs1002_set_max_current(struct ucs1002_info *info, u32 val)
> +{
> + unsigned int reg;
> + int ret, idx;
> +
> + for (idx = 0; idx < ARRAY_SIZE(ucs1002_current_limit_uA); idx++) {
> + if (val == ucs1002_current_limit_uA[idx])
> + break;
> + }
> +
> + if (idx == ARRAY_SIZE(ucs1002_current_limit_uA)) {
> + dev_err(&info->client->dev,
> + "%d is an invalid max current value\n", val);
> + return -EINVAL;
> + }
> +
> + ret = regmap_write(info->regmap, UCS1002_REG_ILIMIT, idx);
> + if (ret)
> + return ret;
> + /*
> + * Any current limit setting exceeding the one set via ILIM
> + * pin will be rejected, so we read out freshly changed limit
> + * to make sure that it took effect.
> + */
> + ret = regmap_read(info->regmap, UCS1002_REG_ILIMIT, &reg);
> + if (ret)
> + return ret;
> +
> + if (reg != idx)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static enum power_supply_usb_type ucs1002_usb_types[] = {
> + POWER_SUPPLY_USB_TYPE_PD,
> + POWER_SUPPLY_USB_TYPE_SDP,
> + POWER_SUPPLY_USB_TYPE_DCP,
> + POWER_SUPPLY_USB_TYPE_CDP,
> + POWER_SUPPLY_USB_TYPE_UNKNOWN,
> +};
> +
> +static int ucs1002_set_usb_type(struct ucs1002_info *info, int val)
> +{
> + unsigned int mode;
> +
> + if (val >= ARRAY_SIZE(ucs1002_usb_types))
> + return -EINVAL;
> +
> + switch (ucs1002_usb_types[val]) {
> + case POWER_SUPPLY_USB_TYPE_PD:
> + mode = V_SET_ACTIVE_MODE_DEDICATED;
> + break;
> + case POWER_SUPPLY_USB_TYPE_SDP:
> + mode = V_SET_ACTIVE_MODE_BC12_SDP;
> + break;
> + case POWER_SUPPLY_USB_TYPE_DCP:
> + mode = V_SET_ACTIVE_MODE_BC12_DCP;
> + break;
> + case POWER_SUPPLY_USB_TYPE_CDP:
> + mode = V_SET_ACTIVE_MODE_BC12_CDP;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return regmap_update_bits(info->regmap, UCS1002_REG_SWITCH_CFG,
> + V_SET_ACTIVE_MODE_MASK, mode);
> +}
> +
> +static int ucs1002_get_usb_type(struct ucs1002_info *info,
> + union power_supply_propval *val)
> +{
> + enum power_supply_usb_type type;
> + unsigned int reg;
> + int ret;
> +
> + ret = regmap_read(info->regmap, UCS1002_REG_PIN_STATUS, &reg);
> + if (ret)
> + return ret;
> +
> + switch (reg & F_ACTIVE_MODE_MASK) {
> + default:
> + type = POWER_SUPPLY_USB_TYPE_UNKNOWN;
> + break;
> + case F_ACTIVE_MODE_DEDICATED:
> + type = POWER_SUPPLY_USB_TYPE_PD;
> + break;
> + case F_ACTIVE_MODE_BC12_SDP:
> + type = POWER_SUPPLY_USB_TYPE_SDP;
> + break;
> + case F_ACTIVE_MODE_BC12_DCP:
> + type = POWER_SUPPLY_USB_TYPE_DCP;
> + break;
> + case F_ACTIVE_MODE_BC12_CDP:
> + type = POWER_SUPPLY_USB_TYPE_CDP;
> + break;
> + };
> +
> + val->intval = type;
> +
> + return 0;
> +}
> +
> +static int ucs1002_get_health(struct ucs1002_info *info,
> + union power_supply_propval *val)
> +{
> + unsigned int reg;
> + int ret, health;
> +
> + ret = regmap_read(info->regmap, UCS1002_REG_INTERRUPT_STATUS, &reg);
> + if (ret)
> + return ret;
> +
> + if (reg & F_TSD)
> + health = POWER_SUPPLY_HEALTH_OVERHEAT;
> + else if (reg & (F_OVER_VOLT | F_BACK_VOLT))
> + health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
> + else if (reg & F_OVER_ILIM)
> + health = POWER_SUPPLY_HEALTH_OVERCURRENT;
> + else if (reg & (F_DISCHARGE_ERR | F_MIN_KEEP_OUT))
> + health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
> + else
> + health = POWER_SUPPLY_HEALTH_GOOD;
> +
> + val->intval = health;
> +
> + return 0;
> +}
> +
> +static int ucs1002_get_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + struct ucs1002_info *info = power_supply_get_drvdata(psy);
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_ONLINE:
> + return ucs1002_get_online(info, val);
> + case POWER_SUPPLY_PROP_CHARGE_NOW:
> + return ucs1002_get_charge(info, val);
> + case POWER_SUPPLY_PROP_CURRENT_NOW:
> + return ucs1002_get_current(info, val);
> + case POWER_SUPPLY_PROP_CURRENT_MAX:
> + return ucs1002_get_max_current(info, val);
> + case POWER_SUPPLY_PROP_USB_TYPE:
> + return ucs1002_get_usb_type(info, val);
> + case POWER_SUPPLY_PROP_HEALTH:
> + return ucs1002_get_health(info, val);
> + case POWER_SUPPLY_PROP_PRESENT:
> + val->intval = info->present;
> + return 0;
> + case POWER_SUPPLY_PROP_MANUFACTURER:
> + val->strval = UCS1002_MANUFACTURER;
> + return 0;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int ucs1002_set_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + const union power_supply_propval *val)
> +{
> + struct ucs1002_info *info = power_supply_get_drvdata(psy);
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_CURRENT_MAX:
> + return ucs1002_set_max_current(info, val->intval);
> + case POWER_SUPPLY_PROP_USB_TYPE:
> + return ucs1002_set_usb_type(info, val->intval);
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int ucs1002_property_is_writeable(struct power_supply *psy,
> + enum power_supply_property psp)
> +{
> + switch (psp) {
> + case POWER_SUPPLY_PROP_CURRENT_MAX:
> + case POWER_SUPPLY_PROP_USB_TYPE:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> +static const struct power_supply_desc ucs1002_charger_desc = {
> + .name = "ucs1002",
> + .type = POWER_SUPPLY_TYPE_USB,
> + .usb_types = ucs1002_usb_types,
> + .num_usb_types = ARRAY_SIZE(ucs1002_usb_types),
> + .get_property = ucs1002_get_property,
> + .set_property = ucs1002_set_property,
> + .property_is_writeable = ucs1002_property_is_writeable,
> + .properties = ucs1002_props,
> + .num_properties = ARRAY_SIZE(ucs1002_props),
> +};
> +
> +static irqreturn_t ucs1002_charger_irq(int irq, void *data)
> +{
> + int ret, regval;
> + bool present;
> + struct ucs1002_info *info = data;
> +
> + present = info->present;
> +
> + ret = regmap_read(info->regmap, UCS1002_REG_OTHER_STATUS, &regval);
> + if (ret)
> + return IRQ_HANDLED;
> +
> + /* update attached status */
> + info->present = (regval & F_ADET_PIN) ? true : false;
> +
> + /* notify the change */
> + if (present != info->present)
> + power_supply_changed(info->charger);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t ucs1002_alert_irq(int irq, void *data)
> +{
> + struct ucs1002_info *info = data;
> +
> + power_supply_changed(info->charger);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static const struct regulator_ops ucs1002_regulator_ops = {
> + .is_enabled = regulator_is_enabled_regmap,
> + .enable = regulator_enable_regmap,
> + .disable = regulator_disable_regmap,
> +};
> +
> +static const struct regulator_desc ucs1002_regulator_descriptor = {
> + .name = "ucs1002-vbus",
> + .ops = &ucs1002_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + .enable_reg = UCS1002_REG_SWITCH_CFG,
> + .enable_mask = F_PWR_EN_SET,
> + .enable_val = F_PWR_EN_SET,
> + .fixed_uV = 5000000,
> + .n_voltages = 1,
> +};
> +
> +static int ucs1002_probe(struct i2c_client *client,
> + const struct i2c_device_id *dev_id)
> +{
> + struct device *dev = &client->dev;
> + struct power_supply_config charger_config = {};
> + const struct regmap_config regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + };
> + struct regulator_config regulator_config = {};
> + int irq_a_det, irq_alert, ret;
> + struct regulator_dev *rdev;
> + struct ucs1002_info *info;
> + unsigned int regval;
> +
> + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
> + if (!info)
> + return -ENOMEM;
> +
> + info->regmap = devm_regmap_init_i2c(client, &regmap_config);
> + if (IS_ERR(info->regmap)) {
> + ret = PTR_ERR(info->regmap);
> + dev_err(dev, "regmap initialization failed: %d\n", ret);
> + return ret;
> + }
> +
> + info->client = client;
> +
> + irq_a_det = of_irq_get_byname(dev->of_node, "a_det");
> + irq_alert = of_irq_get_byname(dev->of_node, "alert");
> +
> + charger_config.of_node = dev->of_node;
> + charger_config.drv_data = info;
> +
> + ret = regmap_read(info->regmap, UCS1002_REG_PRODUCT_ID, &regval);
> + if (ret)
> + return ret;
> +
> + if (regval != UCS1002_PRODUCT_ID) {
> + dev_err(dev,
> + "Product ID does not match (0x%02x != 0x%02x)\n",
> + regval, UCS1002_PRODUCT_ID);
> + return -ENODEV;
> + }
> +
> + dev_info(dev, "registered with product id 0x%02x\n", regval);
> +
> + /* Enable charge rationing by default */
> + ret = regmap_update_bits(info->regmap, UCS1002_REG_GENERAL_CFG,
> + F_RATION_EN, F_RATION_EN);
> + if (ret)
> + return ret;
> +
> + dev_dbg(dev, "set active mode selection through i2c\n");
> + /*
> + * Ignore the M1, M2, PWR_EN, and EM_EN pin states. Set active
> + * mode selection to Dedicated Charger Emulation Cycle.
> + *
> + * #M1 #M2 EM_EN
> + * 0 0 1 - Dedicated Charger Emulation Cycle
> + *
> + */
> + ret = regmap_update_bits(info->regmap, UCS1002_REG_SWITCH_CFG,
> + F_PIN_IGNORE | F_EM_EN_SET | F_M2_SET |
> + F_M1_SET, F_PIN_IGNORE | F_EM_EN_SET);
> + if (ret)
> + return ret;
> + /*
> + * Be safe and set initial current limit to 500mA
> + */
> + ret = ucs1002_set_max_current(info, 500000);
> + if (ret) {
> + dev_err(dev, "Failed to read max current default\n");
> + return ret;
> + }
> +
> + info->charger = devm_power_supply_register(dev, &ucs1002_charger_desc,
> + &charger_config);
> + if (IS_ERR(info->charger)) {
> + dev_err(dev, "failed to register power supply\n");
> + return PTR_ERR(info->charger);
> + }
> +
> + ret = regmap_read(info->regmap, UCS1002_REG_PIN_STATUS, &regval);
> + if (ret)
> + return ret;
> +
> + info->regulator_descriptor =
> + devm_kmemdup(dev, &ucs1002_regulator_descriptor,
> + sizeof(ucs1002_regulator_descriptor),
> + GFP_KERNEL);
> + info->regulator_descriptor->enable_is_inverted = !(regval & F_SEL_PIN);
> +
> + regulator_config.dev = dev;
> + regulator_config.of_node = dev->of_node;
> + regulator_config.regmap = info->regmap;
> +
> + rdev = devm_regulator_register(dev, info->regulator_descriptor,
> + &regulator_config);
> + if (IS_ERR(rdev)) {
> + dev_err(dev, "failed to register VBUS regulator\n");
> + return PTR_ERR(rdev);
> + }
> +
> + if (irq_a_det > 0) {
> + ret = devm_request_threaded_irq(dev, irq_a_det, NULL,
> + ucs1002_charger_irq,
> + IRQF_TRIGGER_FALLING |
> + IRQF_TRIGGER_RISING |
> + IRQF_ONESHOT,
> + "ucs1002-a_det", info);
> + if (ret) {
> + dev_err(dev, "failed to request A_DET threaded irq\n");
> + return ret;
> + }
> + }
> +
> + if (irq_alert > 0) {
> + ret = devm_request_threaded_irq(dev, irq_alert, NULL,
> + ucs1002_alert_irq,
> + IRQF_TRIGGER_FALLING |
> + IRQF_TRIGGER_RISING |
> + IRQF_ONESHOT,
> + "ucs1002-alert", info);
> + if (ret) {
> + dev_err(dev, "failed to request ALERT threaded irq\n");
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +#if IS_ENABLED(CONFIG_OF)

This driver is DT only, this if is not needed.

> +static const struct of_device_id ucs1002_of_match[] = {
> + { .compatible = "microchip,ucs1002", },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, ucs1002_of_match);
> +#endif
> +
> +static const struct i2c_device_id ucs1002_ids[] = {
> + {"ucs1002", 0},
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(i2c, ucs1002_ids);
> +
> +static struct i2c_driver ucs1002_driver = {
> + .driver = {
> + .name = "ucs1002",
> + .of_match_table = of_match_ptr(ucs1002_of_match),

No need to use of_match_ptr, is DT-only.

> + },
> + .probe = ucs1002_probe,
> +};
> +module_i2c_driver(ucs1002_driver);
> +
> +MODULE_DESCRIPTION("Microchip UCS1002 Programmable USB Port Power Controller");
> +MODULE_AUTHOR("Enric Balletbo Serra <enric.balletbo@collabora.com>");

I'm not sure how much differs this patch from the one I sent 3 years
ago ... but if i'm the author or co-author you should add the
signed-off-by.

[1] https://lkml.org/lkml/2016/3/14/233
[2] https://www.spinics.net/lists/devicetree/msg122745.html

> +MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>");
> +MODULE_LICENSE("GPL v2");
> --
> 2.20.1
>

\
 
 \ /
  Last update: 2019-04-26 18:53    [W:0.149 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site