lkml.org 
[lkml]   [2019]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 1/6] dt-bindings: ap806: add the cluster clock node in the syscon file
On Tue, Apr 23, 2019 at 11:51:02AM +0200, Gregory CLEMENT wrote:
> Document the device tree binding for the cluster clock controllers found
> in the Armada 7K/8K SoCs.
>
> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ---
> .../arm/marvell/ap806-system-controller.txt | 26 +++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
> index 7b8b8eb0191f..a65d3e9ff915 100644
> --- a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
> +++ b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
> @@ -143,3 +143,29 @@ ap_syscon1: system-controller@6f8000 {
> #thermal-sensor-cells = <1>;
> };
> };
> +
> +Cluster clocks:
> +---------------
> +
> +Device Tree Clock bindings for cluster clock of AP806 Marvell. Each
> +cluster contain up to 2 CPUs running at the same frequency.
> +
> +Required properties:
> +- compatible: must be "marvell,ap806-cpu-clock";
> +- #clock-cells : should be set to 1.
> +- clocks : shall be the input parents clock phandle for the clock.
> +- reg: register range associated the cluster clocks, offset must be 0
> + and the size have to be the whole size of the system-controller
> +
> +
> +ap_syscon1: system-controller@6f8000 {
> + compatible = "syscon", "simple-mfd";

This should have a specific compatible.

> + reg = <0x6f8000 0x1000>;
> +
> + cpu_clk: clock-cpu@0 {
> + compatible = "marvell,ap806-cpu-clock";
> + clocks = <&ap_clk 0>, <&ap_clk 1>;
> + #clock-cells = <1>;
> + reg = <0x0 0x1000>;

This takes the entire address range of the parent, then why the child
node? You can't add any other child nodes without creating an overlap.

Your example also won't compile.

Rob

\
 
 \ /
  Last update: 2019-04-26 16:30    [W:0.059 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site