lkml.org 
[lkml]   [2019]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 3/5] mmc: mmci: fix clear of busy detect status
Date
From: Ludovic Barre <ludovic.barre@st.com>

The "busy_detect_flag" is used to read/clear busy value of
mmci status. The "busy_detect_mask" is used to manage busy irq of
mmci mask.
For sdmmc variant, the 2 properties have not the same offset.
To clear the busyd0 status bit, we must add busy detect flag,
the mmci mask is not enough.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
drivers/mmc/host/mmci.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index a040f54..3cd52e8 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1517,7 +1517,8 @@ static irqreturn_t mmci_irq(int irq, void *dev_id)
* to make sure that both start and end interrupts are always
* cleared one after the other.
*/
- status &= readl(host->base + MMCIMASK0);
+ status &= readl(host->base + MMCIMASK0) |
+ host->variant->busy_detect_flag;
if (host->variant->busy_detect)
writel(status & ~host->variant->busy_detect_mask,
host->base + MMCICLEAR);
--
2.7.4
\
 
 \ /
  Last update: 2019-04-26 09:47    [W:0.281 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site