lkml.org 
[lkml]   [2019]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 04/10] Documentation: dt: device tree bindings for LPDDR3 memories
On Fri, Apr 19, 2019 at 04:19:22PM +0200, Lukasz Luba wrote:
> The device tree bindings for LPDDR3 SDRAM memories.
>
> For specifying the AC timing parameters of the memory device
> the 'lpddr3' binding uses binding 'lpddr2-timings'.
>
> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
> ---
> .../devicetree/bindings/lpddr3/lpddr3-timings.txt | 57 +++++++++++++
> .../devicetree/bindings/lpddr3/lpddr3.txt | 93 ++++++++++++++++++++++

Please rename the lpddr2 directory to 'ddr' and add these to it.

Maybe whatever properties are common should be put in a common doc.

> 2 files changed, 150 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/lpddr3/lpddr3-timings.txt
> create mode 100644 Documentation/devicetree/bindings/lpddr3/lpddr3.txt
>
> diff --git a/Documentation/devicetree/bindings/lpddr3/lpddr3-timings.txt b/Documentation/devicetree/bindings/lpddr3/lpddr3-timings.txt
> new file mode 100644
> index 0000000..ebf3e00
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/lpddr3/lpddr3-timings.txt
> @@ -0,0 +1,57 @@
> +* AC timing parameters of LPDDR3 memories for a given speed-bin.
> +* The structures are based on LPDDR2 and extended where needed.
> +
> +Required properties:
> +- compatible : Should be "jedec,lpddr3-timings"
> +- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
> +- max-freq : maximum DDR clock frequency for the speed-bin. Type is <u32>
> +
> +Optional properties:
> +
> +The following properties represent AC timing parameters from the memory
> +data-sheet of the device for a given speed-bin. All these properties are
> +of type <u32> and the default unit is ps (pico seconds).
> +- tRFC
> +- tRRD
> +- tRPab
> +- tRPpb
> +- tRCD
> +- tRC
> +- tRAS
> +- tWTR
> +- tWR
> +- tRTP
> +- tW2W-C2C
> +- tR2R-C2C
> +- tFAW
> +- tXSR
> +- tXP
> +- tCKE
> +- tCKESR
> +- tMRD
> +
> +Example:
> +
> +timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@0 {

Since the lpddr2 version was written, we've gotten stricter about
allowing unit-address without reg property. Perhaps 'reg' should be the
max-freq instead.

> + compatible = "jedec,lpddr3-timings";
> + min-freq = <100000000>;
> + max-freq = <800000000>;
> + tRFC = <65000>;
> + tRRD = <6000>;
> + tRPab = <12000>;
> + tRPpb = <12000>;
> + tRCD = <10000>;
> + tRC = <33750>;
> + tRAS = <23000>;
> + tWTR = <3750>;
> + tWR = <7500>;
> + tRTP = <3750>;
> + tW2W-C2C = <0>;
> + tR2R-C2C = <0>;
> + tFAW = <25000>;
> + tXSR = <70000>;
> + tXP = <3750>;
> + tCKE = <3750>;
> + tCKESR = <3750>;
> + tMRD = <7000>;
> +};
> diff --git a/Documentation/devicetree/bindings/lpddr3/lpddr3.txt b/Documentation/devicetree/bindings/lpddr3/lpddr3.txt
> new file mode 100644
> index 0000000..fc7875c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/lpddr3/lpddr3.txt
> @@ -0,0 +1,93 @@
> +* LPDDR3 SDRAM memories compliant to JEDEC JESD209-2

That's an LPDDR2 spec.

> +
> +Required properties:
> +- compatible : Should be - "jedec,lpddr3"
> +- density : <u32> representing density in Mb (Mega bits)
> +- io-width : <u32> representing bus width. Possible values are 8, 16, 32, 64
> +
> +Optional properties:
> +
> +The following optional properties represent the minimum value of some AC
> +timing parameters of the DDR device in terms of number of clock cycles.
> +These values shall be obtained from the device data-sheet.
> +- tRFC-min-tck
> +- tRRD-min-tck
> +- tRPab-min-tck
> +- tRPpb-min-tck
> +- tRCD-min-tck
> +- tRC-min-tck
> +- tRAS-min-tck
> +- tWTR-min-tck
> +- tWR-min-tck
> +- tRTP-min-tck
> +- tW2W-C2C-min-tck
> +- tR2R-C2C-min-tck
> +- tWL-min-tck
> +- tDQSCK-min-tck
> +- tRL-min-tck
> +- tFAW-min-tck
> +- tXSR-min-tck
> +- tXP-min-tck
> +- tCKE-min-tck
> +- tCKESR-min-tck
> +- tMRD-min-tck
> +
> +Child nodes:
> +- The lpddr3 node may have one or more child nodes of type "lpddr3-timings".
> + "lpddr3-timings" provides AC timing parameters of the device for
> + a given speed-bin. Please see Documentation/devicetree/
> + bindings/lpddr3/lpddr3-timings.txt for more information on "lpddr3-timings"
> +
> +Example:
> +
> +samsung_K3QF2F20DB: lpddr3 {
> + compatible = "Samsung,K3QF2F20DB","jedec,lpddr3";
> + density = <16384>;
> + io-width = <32>;
> +
> + tRFC-min-tck = <17>;
> + tRRD-min-tck = <2>;
> + tRPab-min-tck = <2>;
> + tRPpb-min-tck = <2>;
> + tRCD-min-tck = <3>;
> + tRC-min-tck = <6>;
> + tRAS-min-tck = <5>;
> + tWTR-min-tck = <2>;
> + tWR-min-tck = <7>;
> + tRTP-min-tck = <2>;
> + tW2W-C2C-min-tck = <0>;
> + tR2R-C2C-min-tck = <0>;
> + tWL-min-tck = <8>;
> + tDQSCK-min-tck = <5>;
> + tRL-min-tck = <14>;
> + tFAW-min-tck = <5>;
> + tXSR-min-tck = <12>;
> + tXP-min-tck = <2>;
> + tCKE-min-tck = <2>;
> + tCKESR-min-tck = <2>;
> + tMRD-min-tck = <5>;
> +
> + timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@0 {
> + compatible = "jedec,lpddr3-timings";
> + min-freq = <100000000>;
> + max-freq = <800000000>;
> + tRFC = <65000>;
> + tRRD = <6000>;
> + tRPab = <12000>;
> + tRPpb = <12000>;
> + tRCD = <10000>;
> + tRC = <33750>;
> + tRAS = <23000>;
> + tWTR = <3750>;
> + tWR = <7500>;
> + tRTP = <3750>;
> + tW2W-C2C = <0>;
> + tR2R-C2C = <0>;
> + tFAW = <25000>;
> + tXSR = <70000>;
> + tXP = <3750>;
> + tCKE = <3750>;
> + tCKESR = <3750>;
> + tMRD = <7000>;
> + };
> +}
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2019-04-25 21:52    [W:0.227 / U:1.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site