lkml.org 
[lkml]   [2019]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 5/7] net: stmmac: add xpcs function hooks into main driver and ethtool
Date
> From: Ong Boon Leong <boon.leong.ong@intel.com>
>
> With xPCS functions now ready, we add them into the main driver and
> ethtool logics. To differentiate from EQoS MAC PCS and DWC Ethernet xPCS,
> we introduce 'has_xpcs' in platform data as a mean to indicate whether GBE
> controller includes xPCS or not.
>
> To support platform-specific C37 AN PCS mode selection for MII MMD, we
> introduce 'pcs_mode' in platform data.
>
> The basic framework for xPCS interrupt handling is implemented too.
>
> Reviewed-by: Chuah Kim Tatt <kim.tatt.chuah@intel.com>
> Reviewed-by: Voon Weifeng <weifeng.voon@intel.com>
> Reviewed-by: Kweh Hock Leong <hock.leong.kweh@intel.com>
> Reviewed-by: Baoli Zhang <baoli.zhang@intel.com>
> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
> ---
> drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 +
> .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 14 ++++++
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 50
> ++++++++++++++++++++++
> include/linux/stmmac.h | 2 +
> 4 files changed, 68 insertions(+)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> index dd95d95..0b8460a 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> @@ -36,6 +36,7 @@ struct stmmac_resources {
> const char *mac;
> int wol_irq;
> int lpi_irq;
> + int xpcs_irq;
> int irq;
> };
>
> @@ -168,6 +169,7 @@ struct stmmac_priv {
> int clk_csr;
> struct timer_list eee_ctrl_timer;
> int lpi_irq;
> + int xpcs_irq;
> int eee_enabled;
> int eee_active;
> int tx_lpi_timer;
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
> b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
> index 3c749c3..0c146b3 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
> @@ -392,6 +392,10 @@ static int stmmac_ethtool_get_link_ksettings(struct
> net_device *dev,
>
> mutex_lock(&priv->lock);
> stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 1, priv->hw->ps, 0);
> +
> + if (priv->plat->has_xpcs)
> + stmmac_xpcs_ctrl_ane(priv, dev, 1, 0);
> +
> mutex_unlock(&priv->lock);
>
> return 0;
> @@ -457,6 +461,11 @@ static void stmmac_ethtool_gregs(struct net_device
> *dev,
> pause->autoneg = 1;
> if (!adv_lp.pause)
> return;
> + } else if (priv->plat->has_xpcs &&
> + !stmmac_xpcs_get_adv_lp(priv, netdev, &adv_lp)) {
> + pause->autoneg = 1;
> + if (!adv_lp.pause)
> + return;
> } else {
> if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
> netdev->phydev->supported) || @@ -
> 488,6 +497,11 @@ static void stmmac_ethtool_gregs(struct net_device *dev,
> pause->autoneg = 1;
> if (!adv_lp.pause)
> return -EOPNOTSUPP;
> + } else if (priv->plat->has_xpcs &&
> + !stmmac_xpcs_get_adv_lp(priv, netdev, &adv_lp)) {
> + pause->autoneg = 1;
> + if (!adv_lp.pause)
> + return -EOPNOTSUPP;
> } else {
> if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
> phy->supported) ||
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index ec031e3..d6e315f 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -112,6 +112,7 @@
> MODULE_PARM_DESC(chain_mode, "To use chain instead of ring mode");
>
> static irqreturn_t stmmac_interrupt(int irq, void *dev_id);
> +static irqreturn_t xpcs_interrupt(int irq, void *dev_id);
>
> #ifdef CONFIG_DEBUG_FS
> static int stmmac_init_fs(struct net_device *dev); @@ -2538,6 +2539,10 @@
> static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
> /* Initialize MTL*/
> stmmac_mtl_configuration(priv);
>
> + /* Initialize the xPCS PHY */
> + if (priv->plat->has_xpcs)
> + stmmac_xpcs_init(priv, dev, priv->plat->pcs_mode);
> +
> /* Initialize Safety Features */
> stmmac_safety_feat_configuration(priv);
>
> @@ -2579,6 +2584,9 @@ static int stmmac_hw_setup(struct net_device
> *dev, bool init_ptp)
> if (priv->hw->pcs)
> stmmac_pcs_ctrl_ane(priv, priv->hw, 1, priv->hw->ps, 0);
>
> + if (priv->plat->has_xpcs)
> + stmmac_xpcs_ctrl_ane(priv, dev, 1, 0);
> +
> /* set TX and RX rings length */
> stmmac_set_rings_length(priv);
>
> @@ -2696,11 +2704,27 @@ static int stmmac_open(struct net_device *dev)
> }
> }
>
> + /* xPCS IRQ line */
> + if (priv->xpcs_irq > 0) {
> + ret = request_irq(priv->xpcs_irq, xpcs_interrupt,
> IRQF_SHARED,
> + dev->name, dev);
> + if (unlikely(ret < 0)) {
> + netdev_err(priv->dev,
> + "%s: ERROR: allocating the xPCS IRQ %d
> (%d)\n",
> + __func__, priv->xpcs_irq, ret);
> + goto xpcsirq_error;
> + }
> + }
> +
> stmmac_enable_all_queues(priv);
> stmmac_start_all_queues(priv);
>
> return 0;
>
> +xpcsirq_error:
> + if (priv->lpi_irq > 0)
> + free_irq(priv->lpi_irq, dev);
> +
> lpiirq_error:
> if (priv->wol_irq != dev->irq)
> free_irq(priv->wol_irq, dev);
> @@ -3774,6 +3798,31 @@ static irqreturn_t stmmac_interrupt(int irq, void
> *dev_id)
> return IRQ_HANDLED;
> }
>
> +/**
> + * xPCS_interrupt - xPCS ISR
> + * @irq: interrupt number.
> + * @dev_id: to pass the net device pointer.
> + * Description: this is the xPCS interrupt service routine.
> + */
> +static irqreturn_t xpcs_interrupt(int irq, void *dev_id) {
> + irqreturn_t ret = IRQ_NONE;
> + struct net_device *ndev = (struct net_device *)dev_id;
> + struct stmmac_priv *priv = netdev_priv(ndev);
> +
> + if (unlikely(!ndev)) {
> + netdev_err(priv->dev, "%s: invalid dev pointer\n",
> + __func__);
> + return ret;
> + }
> +
> + /* To handle xPCS interrupts */
> + if (priv->plat->has_xpcs)
> + ret = stmmac_xpcs_irq_status(priv, ndev, &priv->xstats);
> +
> + return ret;
> +}
> +
> #ifdef CONFIG_NET_POLL_CONTROLLER
> /* Polling receive - used by NETCONSOLE and other diagnostic tools
> * to allow network I/O with interrupts disabled.
> @@ -4263,6 +4312,7 @@ int stmmac_dvr_probe(struct device *device,
> priv->dev->irq = res->irq;
> priv->wol_irq = res->wol_irq;
> priv->lpi_irq = res->lpi_irq;
> + priv->xpcs_irq = res->xpcs_irq;
>
> if (res->mac)
> memcpy(priv->dev->dev_addr, res->mac, ETH_ALEN); diff --
> git a/include/linux/stmmac.h b/include/linux/stmmac.h index
> b00e795..2adb78c 100644
> --- a/include/linux/stmmac.h
> +++ b/include/linux/stmmac.h
> @@ -189,6 +189,8 @@ struct plat_stmmacenet_data {
> struct reset_control *stmmac_rst;
> struct stmmac_axi *axi;
> int has_gmac4;
> + int has_xpcs;
> + int pcs_mode;
> bool has_sun8i;
> bool tso_en;
> int mac_port_sel_speed;
> --
> 1.9.1

++ stmmac maintainers and c45 experts

\
 
 \ /
  Last update: 2019-04-25 09:08    [W:0.195 / U:7.380 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site