lkml.org 
[lkml]   [2019]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/2] Bluetooth: btusb: Disable LE Advertising on system suspend
From
Date
Hi Marcel,

> On Apr 24, 2019, at 12:28 AM, Marcel Holtmann <marcel@holtmann.org> wrote:
>
> Hi Kai-Heng,
>
>> System may freeze during suspend, and it's caused by btusb early wakeup:
>>
>> kernel: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -16
>> kernel: dpm_run_callback(): pci_pm_suspend+0x0/0x130 returns -16
>> kernel: PM: Device 0000:00:14.0 failed to suspend async: error -16
>> kernel: PM: Some devices failed to suspend, or early wake event detected
>> kernel: usb usb1: usb resume
>> kernel: hub 1-0:1.0: hub_resume
>> kernel: usb usb1-port1: status 0507 change 0000
>> kernel: usb usb1-port6: status 0103 change 0004
>> kernel: usb usb1-port10: status 0107 change 0000
>>
>> where btusb is connecte to usb1-port6.
>>
>> The expirement shows that the early wakeup is caused by LE Advertising
>> packet.
>>
>> Disabling it via event mask can prevent the issue from happening.
>>
>> BugLink: https://bugs.launchpad.net/bugs/1823029
>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
>> ---
>> drivers/bluetooth/btusb.c | 12 ++++++++++++
>> 1 file changed, 12 insertions(+)
>>
>> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
>> index 10c8f9872ee5..f03fcf5687e4 100644
>> --- a/drivers/bluetooth/btusb.c
>> +++ b/drivers/bluetooth/btusb.c
>> @@ -490,6 +490,7 @@ struct btusb_data {
>> int (*setup_on_usb)(struct hci_dev *hdev);
>>
>> int oob_wake_irq; /* irq for out-of-band wake-on-bt */
>> + bool suspended;
>> };
>>
>> static inline void btusb_free_frags(struct btusb_data *data)
>> @@ -3316,12 +3317,18 @@ static void btusb_disconnect(struct usb_interface *intf)
>> static int btusb_suspend(struct usb_interface *intf, pm_message_t message)
>> {
>> struct btusb_data *data = usb_get_intfdata(intf);
>> + struct hci_dev *hdev = data->hdev;
>>
>> BT_DBG("intf %p", intf);
>>
>> if (data->suspend_count++)
>> return 0;
>>
>> + if (!PMSG_IS_AUTO(message)) {
>> + hci_disable_le_advertising(hdev);
>> + data->suspended = true;
>> + }
>> +
>> spin_lock_irq(&data->txlock);
>> if (!(PMSG_IS_AUTO(message) && data->tx_in_flight)) {
>> set_bit(BTUSB_SUSPENDING, &data->flags);
>> @@ -3427,6 +3434,11 @@ static int btusb_resume(struct usb_interface *intf)
>> spin_unlock_irq(&data->txlock);
>> schedule_work(&data->work);
>>
>> + if (data->suspended) {
>> + hci_enable_le_advertising(hdev);
>> + data->suspended = false;
>> + }
>> +
>> return 0;
>
> this is a clear NAK. Please stop hacking things.
>
> Lets use hci_suspend_dev and hci_resume_dev and make it actually do something to disable the events for advertising.

Do you mean hci_disable_le_advertising() should be called by hci_suspend_dev(), which should be called by btusb_suspend()?

I’ve tried calling hci_suspend_dev() without disabling advertising, the issue still presents.

Kai-Heng

>
> Regards
>
> Marcel

\
 
 \ /
  Last update: 2019-04-25 18:27    [W:0.045 / U:0.356 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site