lkml.org 
[lkml]   [2019]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] mmc: sdhci_am654: Fix minor phy configurations
Date
Fix the following minor things:

1. Line wrapping with the regmap_*() functions is way more conservative
than required by the 80 character rule. Expand the function calls out to
use less number of lines.

2. Add an error message if the DLL fails to lock.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
drivers/mmc/host/sdhci_am654.c | 37 ++++++++++++++++------------------
1 file changed, 17 insertions(+), 20 deletions(-)

diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
index eea183e90f1b..866a9082705f 100644
--- a/drivers/mmc/host/sdhci_am654.c
+++ b/drivers/mmc/host/sdhci_am654.c
@@ -88,8 +88,7 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
int ret;

if (sdhci_am654->dll_on) {
- regmap_update_bits(sdhci_am654->base, PHY_CTRL1,
- ENDLL_MASK, 0);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL1, ENDLL_MASK, 0);

sdhci_am654->dll_on = false;
}
@@ -101,8 +100,7 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
val = (1 << OTAPDLYENA_SHIFT) |
(sdhci_am654->otap_del_sel << OTAPDLYSEL_SHIFT);
- regmap_update_bits(sdhci_am654->base, PHY_CTRL4,
- mask, val);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val);
switch (clock) {
case 200000000:
sel50 = 0;
@@ -120,8 +118,7 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
/* Configure PHY DLL frequency */
mask = SEL50_MASK | SEL100_MASK;
val = (sel50 << SEL50_SHIFT) | (sel100 << SEL100_SHIFT);
- regmap_update_bits(sdhci_am654->base, PHY_CTRL5,
- mask, val);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL5, mask, val);
/* Configure DLL TRIM */
mask = DLL_TRIM_ICP_MASK;
val = sdhci_am654->trm_icp << DLL_TRIM_ICP_SHIFT;
@@ -129,19 +126,21 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
/* Configure DLL driver strength */
mask |= DR_TY_MASK;
val |= sdhci_am654->drv_strength << DR_TY_SHIFT;
- regmap_update_bits(sdhci_am654->base, PHY_CTRL1,
- mask, val);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL1, mask, val);
/* Enable DLL */
- regmap_update_bits(sdhci_am654->base, PHY_CTRL1,
- ENDLL_MASK, 0x1 << ENDLL_SHIFT);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL1, ENDLL_MASK,
+ 0x1 << ENDLL_SHIFT);
/*
* Poll for DLL ready. Use a one second timeout.
* Works in all experiments done so far
*/
- ret = regmap_read_poll_timeout(sdhci_am654->base,
- PHY_STAT1, val,
- val & DLLRDY_MASK,
- 1000, 1000000);
+ ret = regmap_read_poll_timeout(sdhci_am654->base, PHY_STAT1,
+ val, val & DLLRDY_MASK, 1000,
+ 1000000);
+ if (ret) {
+ dev_err(mmc_dev(host->mmc), "DLL failed to relock\n");
+ return;
+ }

sdhci_am654->dll_on = true;
}
@@ -186,8 +185,7 @@ static int sdhci_am654_init(struct sdhci_host *host)

/* Reset OTAP to default value */
mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
- regmap_update_bits(sdhci_am654->base, PHY_CTRL4,
- mask, 0x0);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, 0x0);

regmap_read(sdhci_am654->base, PHY_STAT1, &val);
if (~val & CALDONE_MASK) {
@@ -201,15 +199,14 @@ static int sdhci_am654_init(struct sdhci_host *host)
}

/* Enable pins by setting IO mux to 0 */
- regmap_update_bits(sdhci_am654->base, PHY_CTRL1,
- IOMUX_ENABLE_MASK, 0);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL1, IOMUX_ENABLE_MASK, 0);

/* Set slot type based on SD or eMMC */
if (host->mmc->caps & MMC_CAP_NONREMOVABLE)
ctl_cfg_2 = SLOTTYPE_EMBEDDED;

- regmap_update_bits(sdhci_am654->base, CTL_CFG_2,
- ctl_cfg_2, SLOTTYPE_MASK);
+ regmap_update_bits(sdhci_am654->base, CTL_CFG_2, ctl_cfg_2,
+ SLOTTYPE_MASK);

return sdhci_add_host(host);
}
--
2.19.2
\
 
 \ /
  Last update: 2019-04-25 17:58    [W:0.068 / U:47.588 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site