lkml.org 
[lkml]   [2019]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v4 1/4] PCI: Consider alignment of hot-added bridges when distributing available resources
On Wed, Apr 17, 2019 at 02:16:36PM +0000, Nicholas Johnson wrote:
> Rewrite pci_bus_distribute_available_resources to better handle bridges
> with different resource alignment requirements. Pass more details
> arguments recursively to track the resource start and end addresses
> relative to the initial hotplug bridge. This is especially useful for
> Thunderbolt with native PCI enumeration, enabling external graphics
> cards and other devices with bridge alignment higher than 0x100000
> bytes.

It would be nice to have a concrete example including the actual
hotplug bridge windows and the resources required by a hot-added
device. That would help show exactly what the current code is doing
wrong and how your patch fixes it.

> Change extend_bridge_window to resize the actual resource, rather than
> using add_list and dev_res->add_size. If an additional resource entry
> exists for the given resource, zero out the add_size field to avoid it
> interfering. Because add_size is considered optional when allocating,
> using add_size could cause issues in some cases, because successful
> resource distribution requires sizes to be guaranteed.

Could this be a separate patch, or is it impossible to separate from
the pci_bus_distribute_available_resources() changes? If it could be
split, it would make it easier to review, backport, isolate problems,
etc.

> Such cases
> include hot-adding nested hotplug bridges in one enumeration, and
> potentially others which are yet to be encountered.

Obviously hot-adding nested bridges may require more resources, but
the connection to extend_bridge_window() and add_size is not obvious
to me.

> Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
> ---
> drivers/pci/setup-bus.c | 203 ++++++++++++++++++++++------------------
> 1 file changed, 110 insertions(+), 93 deletions(-)
>
> diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
> index ec44a0f3a..a1ca8a11f 100644
> --- a/drivers/pci/setup-bus.c
> +++ b/drivers/pci/setup-bus.c
> @@ -1815,34 +1815,48 @@ void __init pci_assign_unassigned_resources(void)
> }
>
> static void extend_bridge_window(struct pci_dev *bridge, struct resource *res,
> - struct list_head *add_list, resource_size_t available)
> + struct list_head *add_list, resource_size_t new_size)
> {
> struct pci_dev_resource *dev_res;
> + resource_size_t add_size;
>
> if (res->parent)
> return;
>
> - if (resource_size(res) >= available)
> - return;
> -
> - dev_res = res_to_dev_res(add_list, res);
> - if (!dev_res)
> - return;
> + /*
> + * Resources requested using add_size in additional resource lists are
> + * considered optional when allocated. Guaranteed size of allocation
> + * is required to guarantee successful resource distribution. Hence,
> + * the size of the actual resource must be adjusted.
> + */
> + if (new_size >= resource_size(res)) {
> + add_size = new_size - resource_size(res);
> + pci_dbg(bridge, "bridge window %pR extended by %pa\n", res,
> + &add_size);
> + } else {
> + add_size = resource_size(res) - new_size;
> + pci_dbg(bridge, "bridge window %pR shrunken by %pa\n", res,
> + &add_size);
> + }
>
> - /* Is there room to extend the window? */
> - if (available - resource_size(res) <= dev_res->add_size)
> - return;
> + res->end = res->start + new_size - 1;
>
> - dev_res->add_size = available - resource_size(res);
> - pci_dbg(bridge, "bridge window %pR extended by %pa\n", res,
> - &dev_res->add_size);
> + /*
> + * If a list entry exists, we need to remove any additional size
> + * requested because that could interfere with the alignment and
> + * sizing done when distributing resources, causing resources to
> + * fail to allocate later on.
> + */
> + dev_res = res_to_dev_res(add_list, res);
> + if (dev_res)
> + dev_res->add_size = 0;
> }
>
> static void pci_bus_distribute_available_resources(struct pci_bus *bus,
> - struct list_head *add_list, resource_size_t available_io,
> - resource_size_t available_mmio, resource_size_t available_mmio_pref)
> + struct list_head *add_list, struct resource io,
> + struct resource mmio, struct resource mmio_pref)
> {
> - resource_size_t remaining_io, remaining_mmio, remaining_mmio_pref;
> + resource_size_t io_per_hp, mmio_per_hp, mmio_pref_per_hp, align;
> unsigned int normal_bridges = 0, hotplug_bridges = 0;
> struct resource *io_res, *mmio_res, *mmio_pref_res;
> struct pci_dev *dev, *bridge = bus->self;
> @@ -1852,25 +1866,32 @@ static void pci_bus_distribute_available_resources(struct pci_bus *bus,
> mmio_pref_res = &bridge->resource[PCI_BRIDGE_RESOURCES + 2];
>
> /*
> - * Update additional resource list (add_list) to fill all the
> - * extra resource space available for this port except the space
> - * calculated in __pci_bus_size_bridges() which covers all the
> - * devices currently connected to the port and below.
> + * The alignment of this bridge is yet to be considered, hence it must
> + * be done now before extending its bridge window. A single bridge
> + * might not be able to occupy the whole parent region if the alignment
> + * differs - for example, an external GPU at the end of a Thunderbolt
> + * daisy chain.
> */
> - extend_bridge_window(bridge, io_res, add_list, available_io);
> - extend_bridge_window(bridge, mmio_res, add_list, available_mmio);
> - extend_bridge_window(bridge, mmio_pref_res, add_list,
> - available_mmio_pref);
> + align = pci_resource_alignment(bridge, io_res);
> + if (!io_res->parent && align)
> + io.start = ALIGN(io.start, align);
> +
> + align = pci_resource_alignment(bridge, mmio_res);
> + if (!mmio_res->parent && align)
> + mmio.start = ALIGN(mmio.start, align);
> +
> + align = pci_resource_alignment(bridge, mmio_pref_res);
> + if (!mmio_pref_res->parent && align)
> + mmio_pref.start = ALIGN(mmio_pref.start, align);
>
> /*
> - * Calculate the total amount of extra resource space we can
> - * pass to bridges below this one. This is basically the
> - * extra space reduced by the minimal required space for the
> - * non-hotplug bridges.
> + * Update the resources to fill as much remaining resource space in the
> + * parent bridge as possible, while considering alignment.
> */
> - remaining_io = available_io;
> - remaining_mmio = available_mmio;
> - remaining_mmio_pref = available_mmio_pref;
> + extend_bridge_window(bridge, io_res, add_list, resource_size(&io));
> + extend_bridge_window(bridge, mmio_res, add_list, resource_size(&mmio));
> + extend_bridge_window(bridge, mmio_pref_res, add_list,
> + resource_size(&mmio_pref));
>
> /*
> * Calculate how many hotplug bridges and normal bridges there
> @@ -1884,80 +1905,79 @@ static void pci_bus_distribute_available_resources(struct pci_bus *bus,
> normal_bridges++;
> }
>
> + /*
> + * There is only one bridge on the bus so it gets all possible
> + * resources which it can then distribute to the possible
> + * hotplug bridges below.
> + */
> + if (hotplug_bridges + normal_bridges == 1) {
> + dev = list_first_entry(&bus->devices, struct pci_dev, bus_list);
> + if (dev->subordinate)
> + pci_bus_distribute_available_resources(dev->subordinate,
> + add_list, io, mmio, mmio_pref);
> + return;
> + }
> +
> + /*
> + * Reduce the available resource space by what the
> + * bridge and devices below it occupy.
> + */
> for_each_pci_bridge(dev, bus) {
> - const struct resource *res;
> + struct resource *res;
> + resource_size_t used_size;
>
> if (dev->is_hotplug_bridge)
> continue;
>
> - /*
> - * Reduce the available resource space by what the
> - * bridge and devices below it occupy.
> - */
> res = &dev->resource[PCI_BRIDGE_RESOURCES + 0];
> - if (!res->parent && available_io > resource_size(res))
> - remaining_io -= resource_size(res);
> + align = pci_resource_alignment(dev, res);
> + align = align ? ALIGN(io.start, align) - io.start : 0;
> + used_size = align + resource_size(res);
> + if (!res->parent && used_size <= resource_size(&io))
> + io.start += used_size;
>
> res = &dev->resource[PCI_BRIDGE_RESOURCES + 1];
> - if (!res->parent && available_mmio > resource_size(res))
> - remaining_mmio -= resource_size(res);
> + align = pci_resource_alignment(dev, res);
> + align = align ? ALIGN(mmio.start, align) - mmio.start : 0;
> + used_size = align + resource_size(res);
> + if (!res->parent && used_size <= resource_size(&mmio))
> + mmio.start += used_size;
>
> res = &dev->resource[PCI_BRIDGE_RESOURCES + 2];
> - if (!res->parent && available_mmio_pref > resource_size(res))
> - remaining_mmio_pref -= resource_size(res);
> + align = pci_resource_alignment(dev, res);
> + align = align ? ALIGN(mmio_pref.start, align) -
> + mmio_pref.start : 0;
> + used_size = align + resource_size(res);
> + if (!res->parent && used_size <= resource_size(&mmio_pref))
> + mmio_pref.start += used_size;
> }
>
> - /*
> - * There is only one bridge on the bus so it gets all available
> - * resources which it can then distribute to the possible
> - * hotplug bridges below.
> - */
> - if (hotplug_bridges + normal_bridges == 1) {
> - dev = list_first_entry(&bus->devices, struct pci_dev, bus_list);
> - if (dev->subordinate) {
> - pci_bus_distribute_available_resources(dev->subordinate,
> - add_list, available_io, available_mmio,
> - available_mmio_pref);
> - }
> + if (!hotplug_bridges)
> return;
> - }
>
> /*
> - * Go over devices on this bus and distribute the remaining
> - * resource space between hotplug bridges.
> + * Distribute any remaining resources equally between
> + * the hotplug-capable downstream ports.
> */
> - for_each_pci_bridge(dev, bus) {
> - resource_size_t align, io, mmio, mmio_pref;
> - struct pci_bus *b;
> + io_per_hp = div64_ul(resource_size(&io), hotplug_bridges);
> + mmio_per_hp = div64_ul(resource_size(&mmio), hotplug_bridges);
> + mmio_pref_per_hp = div64_ul(resource_size(&mmio_pref),
> + hotplug_bridges);
>
> - b = dev->subordinate;
> - if (!b || !dev->is_hotplug_bridge)
> + for_each_pci_bridge(dev, bus) {
> + if (!dev->subordinate || !dev->is_hotplug_bridge)
> continue;
>
> - /*
> - * Distribute available extra resources equally between
> - * hotplug-capable downstream ports taking alignment into
> - * account.
> - *
> - * Here hotplug_bridges is always != 0.
> - */
> - align = pci_resource_alignment(bridge, io_res);
> - io = div64_ul(available_io, hotplug_bridges);
> - io = min(ALIGN(io, align), remaining_io);
> - remaining_io -= io;
> -
> - align = pci_resource_alignment(bridge, mmio_res);
> - mmio = div64_ul(available_mmio, hotplug_bridges);
> - mmio = min(ALIGN(mmio, align), remaining_mmio);
> - remaining_mmio -= mmio;
> + io.end = io.start + io_per_hp - 1;
> + mmio.end = mmio.start + mmio_per_hp - 1;
> + mmio_pref.end = mmio_pref.start + mmio_pref_per_hp - 1;
>
> - align = pci_resource_alignment(bridge, mmio_pref_res);
> - mmio_pref = div64_ul(available_mmio_pref, hotplug_bridges);
> - mmio_pref = min(ALIGN(mmio_pref, align), remaining_mmio_pref);
> - remaining_mmio_pref -= mmio_pref;
> + pci_bus_distribute_available_resources(dev->subordinate,
> + add_list, io, mmio, mmio_pref);
>
> - pci_bus_distribute_available_resources(b, add_list, io, mmio,
> - mmio_pref);
> + io.start = io.end + 1;
> + mmio.start = mmio.end + 1;
> + mmio_pref.start = mmio_pref.end + 1;
> }
> }
>
> @@ -1965,22 +1985,19 @@ static void
> pci_bridge_distribute_available_resources(struct pci_dev *bridge,
> struct list_head *add_list)
> {
> - resource_size_t available_io, available_mmio, available_mmio_pref;
> - const struct resource *res;
> + struct resource io_res, mmio_res, mmio_pref_res;
>
> if (!bridge->is_hotplug_bridge)
> return;
>
> + io_res = bridge->resource[PCI_BRIDGE_RESOURCES + 0];
> + mmio_res = bridge->resource[PCI_BRIDGE_RESOURCES + 1];
> + mmio_pref_res = bridge->resource[PCI_BRIDGE_RESOURCES + 2];
> +
> /* Take the initial extra resources from the hotplug port */
> - res = &bridge->resource[PCI_BRIDGE_RESOURCES + 0];
> - available_io = resource_size(res);
> - res = &bridge->resource[PCI_BRIDGE_RESOURCES + 1];
> - available_mmio = resource_size(res);
> - res = &bridge->resource[PCI_BRIDGE_RESOURCES + 2];
> - available_mmio_pref = resource_size(res);
>
> pci_bus_distribute_available_resources(bridge->subordinate,
> - add_list, available_io, available_mmio, available_mmio_pref);
> + add_list, io_res, mmio_res, mmio_pref_res);
> }
>
> void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
> --
> 2.20.1
>

\
 
 \ /
  Last update: 2019-04-25 15:29    [W:0.045 / U:21.816 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site