lkml.org 
[lkml]   [2019]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] arm64: dts: ulcb-kf: Add support for TI WL1837
Hi Simon,

Do we have any chance getting this upstream? If so, would you kindly
list the acceptance criteria we have to conform to?

Many thanks.

On Thu, Apr 11, 2019 at 02:41:03PM +0200, Spyridon Papageorgiou wrote:
> This patch adds description of TI WL1837 and links interfaces
> to communicate with the IC, namely the SDIO interface to WLAN.
>
> Signed-off-by: Spyridon Papageorgiou <spapageorgiou@de.adit-jv.com>
> ---
> arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 49 ++++++++++++++++++++++++++++++++
> 1 file changed, 49 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
> index 7a09576..27851a7 100644
> --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
> +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
> @@ -38,6 +38,18 @@
> regulator-min-microvolt = <5000000>;
> regulator-max-microvolt = <5000000>;
> };
> +
> + wlan_en: regulator-wlan_en {
> + compatible = "regulator-fixed";
> + regulator-name = "wlan-en-regulator";
> +
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + gpio = <&gpio_exp_74 4 GPIO_ACTIVE_HIGH>;
> + startup-delay-us = <70000>;
> + enable-active-high;
> + };
> };
>
> &can0 {
> @@ -88,6 +100,13 @@
> line-name = "Audio_Out_OFF";
> };
>
> + sd-wifi-mux {
> + gpio-hog;
> + gpios = <5 GPIO_ACTIVE_HIGH>;
> + output-low; /* Connect WL1837 */
> + line-name = "SD WiFi mux";
> + };
> +
> hub_pwen {
> gpio-hog;
> gpios = <6 GPIO_ACTIVE_HIGH>;
> @@ -254,6 +273,12 @@
> function = "scif1";
> };
>
> + sdhi3_pins: sdhi3 {
> + groups = "sdhi3_data4", "sdhi3_ctrl";
> + function = "sdhi3";
> + power-source = <3300>;
> + };
> +
> usb0_pins: usb0 {
> groups = "usb0";
> function = "usb0";
> @@ -273,6 +298,30 @@
> status = "okay";
> };
>
> +&sdhi3 {
> + pinctrl-0 = <&sdhi3_pins>;
> + pinctrl-names = "default";
> +
> + vmmc-supply = <&wlan_en>;
> + vqmmc-supply = <&wlan_en>;
> + bus-width = <4>;
> + no-1-8-v;
> + non-removable;
> + cap-power-off-card;
> + keep-power-in-suspend;
> + max-frequency = <26000000>;
> + status = "okay";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> + wlcore: wlcore@2 {
> + compatible = "ti,wl1837";
> + reg = <2>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> + };
> +};
> +
> &usb2_phy0 {
> pinctrl-0 = <&usb0_pins>;
> pinctrl-names = "default";
> --
> 2.7.4
>

--
Best regards,
Eugeniu.

\
 
 \ /
  Last update: 2019-04-25 13:13    [W:0.147 / U:40.468 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site