lkml.org 
[lkml]   [2019]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/6] dt-bindings: hwlock: update STM32 #hwlock-cells value
Date
Use a value of 2, so users can share hwlocks.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt
index adf4f000..60a3716 100644
--- a/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt
+++ b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt
@@ -4,8 +4,8 @@ STM32 Hardware Spinlock Device Binding
Required properties :
- compatible : should be "st,stm32-hwspinlock".
- reg : the register address of hwspinlock.
-- #hwlock-cells : hwlock users only use the hwlock id to represent a specific
- hwlock, so the number of cells should be <1> here.
+- #hwlock-cells : should be <2> so the hwlock users use the hwlock id to
+ represent a specific hwlock and define its shared / exclusive attribute.
- clock-names : Must contain "hsem".
- clocks : Must contain a phandle entry for the clock in clock-names, see the
common clock bindings.
@@ -16,7 +16,7 @@ Please look at the generic hwlock binding for usage information for consumers,
Example of hwlock provider:
hwspinlock@4c000000 {
compatible = "st,stm32-hwspinlock";
- #hwlock-cells = <1>;
+ #hwlock-cells = <2>;
reg = <0x4c000000 0x400>;
clocks = <&rcc HSEM>;
clock-names = "hsem";
--
2.7.4
\
 
 \ /
  Last update: 2019-04-25 11:19    [W:0.051 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site