lkml.org 
[lkml]   [2019]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 2/3] RISC-V: Add interrupt related SCAUSE defines in asm/csr.h
Date
This patch adds SCAUSE interrupt flag and SCAUSE interrupt related
defines to asm/csr.h. We also use these defines in kernel/irq.c and
express SIE/SIP flags in-terms of SCAUSE interrupt causes.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
---
arch/riscv/include/asm/csr.h | 21 +++++++++++++++++----
arch/riscv/kernel/irq.c | 16 ++++------------
2 files changed, 21 insertions(+), 16 deletions(-)

diff --git a/arch/riscv/include/asm/csr.h b/arch/riscv/include/asm/csr.h
index 2ae54a7386f1..a89a9bf2c7f2 100644
--- a/arch/riscv/include/asm/csr.h
+++ b/arch/riscv/include/asm/csr.h
@@ -51,10 +51,18 @@
#define SATP_MODE SATP_MODE_39
#endif

-/* Interrupt Enable and Interrupt Pending flags */
-#define SIE_SSIE _AC(0x00000002, UL) /* Software Interrupt Enable */
-#define SIE_STIE _AC(0x00000020, UL) /* Timer Interrupt Enable */
-#define SIE_SEIE _AC(0x00000200, UL) /* External Interrupt Enable */
+/* SCAUSE */
+#define SCAUSE_IRQ_FLAG (_AC(1, UL) << (__riscv_xlen - 1))
+
+#define IRQ_U_SOFT 0
+#define IRQ_S_SOFT 1
+#define IRQ_M_SOFT 3
+#define IRQ_U_TIMER 4
+#define IRQ_S_TIMER 5
+#define IRQ_M_TIMER 7
+#define IRQ_U_EXT 8
+#define IRQ_S_EXT 9
+#define IRQ_M_EXT 11

#define EXC_INST_MISALIGNED 0
#define EXC_INST_ACCESS 1
@@ -66,6 +74,11 @@
#define EXC_LOAD_PAGE_FAULT 13
#define EXC_STORE_PAGE_FAULT 15

+/* SIE (Interrupt Enable) and SIP (Interrupt Pending) flags */
+#define SIE_SSIE (_AC(0x1, UL) << IRQ_S_SOFT)
+#define SIE_STIE (_AC(0x1, UL) << IRQ_S_TIMER)
+#define SIE_SEIE (_AC(0x1, UL) << IRQ_S_EXT)
+
#ifndef __ASSEMBLY__

#define csr_swap(csr, val) \
diff --git a/arch/riscv/kernel/irq.c b/arch/riscv/kernel/irq.c
index 48e6b7db83a1..d5fd2369256c 100644
--- a/arch/riscv/kernel/irq.c
+++ b/arch/riscv/kernel/irq.c
@@ -14,17 +14,9 @@
/*
* Possible interrupt causes:
*/
-#define INTERRUPT_CAUSE_SOFTWARE 1
-#define INTERRUPT_CAUSE_TIMER 5
-#define INTERRUPT_CAUSE_EXTERNAL 9
-
-/*
- * The high order bit of the trap cause register is always set for
- * interrupts, which allows us to differentiate them from exceptions
- * quickly. The INTERRUPT_CAUSE_* macros don't contain that bit, so we
- * need to mask it off.
- */
-#define INTERRUPT_CAUSE_FLAG (1UL << (__riscv_xlen - 1))
+#define INTERRUPT_CAUSE_SOFTWARE IRQ_S_SOFT
+#define INTERRUPT_CAUSE_TIMER IRQ_S_TIMER
+#define INTERRUPT_CAUSE_EXTERNAL IRQ_S_EXT

int arch_show_interrupts(struct seq_file *p, int prec)
{
@@ -37,7 +29,7 @@ asmlinkage void __irq_entry do_IRQ(struct pt_regs *regs)
struct pt_regs *old_regs = set_irq_regs(regs);

irq_enter();
- switch (regs->scause & ~INTERRUPT_CAUSE_FLAG) {
+ switch (regs->scause & ~SCAUSE_IRQ_FLAG) {
case INTERRUPT_CAUSE_TIMER:
riscv_timer_interrupt();
break;
--
2.17.1
\
 
 \ /
  Last update: 2019-04-25 10:40    [W:0.050 / U:25.540 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site