lkml.org 
[lkml]   [2019]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 7/8] HID: logitech: Enable high-resolution scrolling on Logitech mice
Hi Benjamin,

I tried again to add hi-res wheel support for the G500 with Hans de
Goede's latest patch series you've just merged in for-5.2/logitech, it
is much better but there is still some issues.

The first one is the device index, I need to use device index 0
instead 0xff. I added a quick and dirty quirk (stealing in the
QUIRK_CLASS range since the normal quirk range looks full) to change
the device index assigned in __hidpp_send_report. After that the
device is correctly initialized and the wheel multiplier is set.

The second issue is that wheel values are not actually scaled
according to the multiplier. I get 7/8 full scroll event for each
wheel step. I think it happens because the mouse is split in two
devices. The first device has the wheel events, and the second device
has the HID++ reports. The wheel multiplier is only set on the second
device (where the hi-res mode is enabled) and does not affect the
wheel events from the first one.

Le mer. 19 déc. 2018 à 21:35, Benjamin Tissoires
<benjamin.tissoires@redhat.com> a écrit :
>
> On Wed, Dec 19, 2018 at 11:57 AM Clément VUCHENER
> <clement.vuchener@gmail.com> wrote:
> >
> > Le sam. 15 déc. 2018 à 15:45, Clément VUCHENER
> > <clement.vuchener@gmail.com> a écrit :
> > >
> > > Le ven. 14 déc. 2018 à 19:37, Harry Cutts <hcutts@chromium.org> a écrit :
> > > >
> > > > Hi Clement,
> > > >
> > > > On Fri, 14 Dec 2018 at 05:47, Clément VUCHENER
> > > > <clement.vuchener@gmail.com> wrote:
> > > > > Hi, The G500s (and the G500 too, I think) does support the "scrolling
> > > > > acceleration" bit. If I set it, I get around 8 events for each wheel
> > > > > "click", this is what this driver expects, right? If I understood
> > > > > correctly, I should try this patch with the
> > > > > HIDPP_QUIRK_HI_RES_SCROLL_1P0 quirk set for my mouse.
> > > >
> > > > Thanks for the info! Yes, that should work.
> > >
> > > Well, it is not that simple. I get "Device not connected" errors for
> > > both interfaces of the mouse.
> >
> > I suspect the device is not responding because the hid device is not
> > started. When is hid_hw_start supposed to be called? It is called
> > early for HID_QUIRK_CLASS_G920 but later for other device. So the
> > device is not started when hidpp_is_connected is called. Is this
> > because most of the device in this driver are not real HID devices but
> > DJ devices? How should non-DJ devices be treated?
>
> Hi Clement,
>
> I have a series I sent last September that allows to support non DJ
> devices on logitech-hidpp
> (https://patchwork.kernel.org/project/linux-input/list/?series=16359).
>
> In its current form, with the latest upstream kernel, the series will
> oops during the .event() callback, which is easy enough to fix.
> However, I am currently trying to make it better as a second or third
> reading made me realized that there was a bunch of non-sense in it and
> a proper support would require slightly more work for the non unifying
> receiver case.
>
> I hope I'll be able to send out something by the end of the week.
>
> Cheers,
> Benjamin

\
 
 \ /
  Last update: 2019-04-24 17:35    [W:0.070 / U:4.820 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site