lkml.org 
[lkml]   [2019]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/5] Aspeed: Enable video engine
From
Date

On 4/24/19 5:50 AM, Hans Verkuil wrote:
> Hi Eddie,
>
> On 4/2/19 8:24 PM, Eddie James wrote:
>> This series enables the video engine on Aspeed BMC platforms. The video engine
>> clocking is added to the Aspeed clock driver. The use of the video engine reset
>> line, originally planned to be made externally available in the clock driver,
>> is removed from the video engine driver. Finally a node for the video engine is
>> added to the AST2500 devicetree.
>> The series also includes a missing property for reserved memory in the
>> devicetree documentation, and a small change to make the video engine driver
>> start without reserved memory.
> I assume you'll post a v3 since there were some comments?


Sure... The only change would be a missing semi-colon in the devicetree
doc. And we're only on v2 :)


>
> If you want to get it in for 5.2, then be aware that you should post it tomorrow
> at the latest.
>
> Regards,
>
> Hans
>
>> Eddie James (5):
>> media: platform: Aspeed: Remove use of reset line
>> media: platform: Aspeed: Make reserved memory optional
>> media: dt-bindings: aspeed-video: Add missing memory-region property
>> clk: Aspeed: Setup video engine clocking
>> ARM: dts: aspeed-g5: Add video engine
>>
>> .../devicetree/bindings/media/aspeed-video.txt | 6 ++++
>> arch/arm/boot/dts/aspeed-g5.dtsi | 10 ++++++
>> drivers/clk/clk-aspeed.c | 42 ++++++++++++++++++++--
>> drivers/media/platform/aspeed-video.c | 33 ++++-------------
>> 4 files changed, 61 insertions(+), 30 deletions(-)
>>

\
 
 \ /
  Last update: 2019-04-24 17:01    [W:0.230 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site