lkml.org 
[lkml]   [2019]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] drm/bridge: adv7511: Attach to DSI host at probe time
Date
In contrast to all of the DSI panel drivers in drivers/gpu/drm/panel
which attach to the DSI host via mipi_dsi_attach() at probe time, the
ADV7533 bridge device does not. Instead it defers this to the point that
the upstream device connects to its bridge via drm_bridge_attach().
The generic Synopsys MIPI DSI host driver does not register it's own
drm_bridge until the MIPI DSI has attached. But it does not call
drm_bridge_attach() on the downstream device until the upstream device
has attached. This leads to a chicken and the egg failure and the DRM
pipeline does not complete.
Since all other mipi_dsi_device drivers call mipi_dsi_attach() in
probe(), make the adv7533 mipi_dsi_device do the same. This ensures that
the Synopsys MIPI DSI host registers it's bridge such that it is
available for the upstream device to connect to.

Signed-off-by: Matt Redfearn <matt.redfearn@thinci.com>

---

drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index e7ddd3e3db9..ea36ac3a3de 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -874,9 +874,6 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge)
&adv7511_connector_helper_funcs);
drm_connector_attach_encoder(&adv->connector, bridge->encoder);

- if (adv->type == ADV7533)
- ret = adv7533_attach_dsi(adv);
-
if (adv->i2c_main->irq)
regmap_write(adv->regmap, ADV7511_REG_INT_ENABLE(0),
ADV7511_INT0_HPD);
@@ -1222,7 +1219,11 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
drm_bridge_add(&adv7511->bridge);

adv7511_audio_init(dev, adv7511);
- return 0;
+
+ if (adv7511->type == ADV7533)
+ return adv7533_attach_dsi(adv7511);
+ else
+ return 0;

err_unregister_cec:
i2c_unregister_device(adv7511->i2c_cec);
--
2.17.1
\
 
 \ /
  Last update: 2019-04-24 15:38    [W:0.099 / U:2.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site