lkml.org 
[lkml]   [2019]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next 11/19] net: ethernet: ti: cpsw: fix allmulti cfg in dual_mac mode
On Tue, Apr 23, 2019 at 04:09:02PM +0300, Grygorii Strashko wrote:
>Now CPSW ALE will set/clean Host port bit in Unregistered Multicast Flood
>Mask (UNREG_MCAST_FLOOD_MASK) for every VLAN without checking if this port
>belongs to VLAN or not when ALLMULTI mode flag is set for nedev. This is
>working in non dual_mac mode, but in dual_mac - it causes
>enabling/disabling ALLMULTI flag for both ports.
>
>Hence fix it by adding additional parameter to cpsw_ale_set_allmulti() to
>specify ALE port number for which ALLMULTI has to be enabled and check if
>port belongs to VLAN before modifying UNREG_MCAST_FLOOD_MASK.
>
>Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
>---
> drivers/net/ethernet/ti/cpsw.c | 12 +++++++++---
> drivers/net/ethernet/ti/cpsw_ale.c | 12 ++++++++++--
> drivers/net/ethernet/ti/cpsw_ale.h | 2 +-
> 3 files changed, 20 insertions(+), 6 deletions(-)
>
[...]
>+ vlan_members =
>+ cpsw_ale_get_vlan_member_list(ale_entry,
>+ ale->vlan_field_bits);
Seems like declaration for cpsw_ale_get_vlan_member_list() is not
part of the patchset


--
Regards,
Ivan Khoronzhuk

\
 
 \ /
  Last update: 2019-04-24 14:22    [W:0.228 / U:1.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site