[lkml]   [2019]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH 1/5] dt-bindings: pinctrl: Add BM1880 pinctrl binding
Add pinctrl binding for Bitmain BM1880 SoC. The SoC is not capable
of handling pinconf, thereby supporting only pinmux and this limitation
is documented.

Signed-off-by: Manivannan Sadhasivam <>
.../pinctrl/bitmain,bm1880-pinctrl.txt | 98 +++++++++++++++++++
1 file changed, 98 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt

diff --git a/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt
new file mode 100644
index 000000000000..ed34bb1ee81c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt
@@ -0,0 +1,98 @@
+Bitmain BM1880 Pin Controller
+This binding describes the pin controller found in the BM1880 SoC.
+Required Properties:
+- compatible: Should be "bitmain,bm1880-pinctrl"
+- reg: Offset and length of pinctrl space in SCTRL.
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration for BM1880 SoC
+includes only pinmux as there is no pinconf support available in SoC.
+Each configuration node can consist of multiple nodes describing the pinmux
+options. The name of each subnode is not important; all subnodes should be
+enumerated and processed purely based on their content.
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pinmux subnode:
+Required Properties:
+- pins: An array of strings, each string containing the name of a pin.
+ Valid values for pins are:
+ MIO0 - MIO111
+- groups: An array of strings, each string containing the name of a pin
+ group. Valid values for groups are:
+ nand_grp, spi_grp, emmc_grp, sdio_grp, eth0_grp, pwm0_grp,
+ pwm1_grp, pwm2_grp, pwm3_grp, pwm4_grp, pwm5_grp, pwm6_grp,
+ pwm7_grp, pwm8_grp, pwm9_grp, pwm10_grp, pwm11_grp, pwm12_grp,
+ pwm13_grp, pwm14_grp, pwm15_grp, pwm16_grp, pwm17_grp,
+ pwm18_grp, pwm19_grp, pwm20_grp, pwm21_grp, pwm22_grp,
+ pwm23_grp, pwm24_grp, pwm25_grp, pwm26_grp, pwm27_grp,
+ pwm28_grp, pwm29_grp, pwm30_grp, pwm31_grp, pwm32_grp,
+ pwm33_grp, pwm34_grp, pwm35_grp, pwm36_grp, i2c0_grp,
+ i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, uart0_grp, uart1_grp,
+ uart2_grp, uart3_grp, uart4_grp, uart5_grp, uart6_grp,
+ uart7_grp, uart8_grp, uart9_grp, uart10_grp, uart11_grp,
+ uart12_grp, uart13_grp, uart14_grp, uart15_grp, gpio0_grp,
+ gpio1_grp, gpio2_grp, gpio3_grp, gpio4_grp, gpio5_grp,
+ gpio6_grp, gpio7_grp, gpio8_grp, gpio9_grp, gpio10_grp,
+ gpio11_grp, gpio12_grp, gpio13_grp, gpio14_grp, gpio15_grp,
+ gpio16_grp, gpio17_grp, gpio18_grp, gpio19_grp, gpio20_grp,
+ gpio21_grp, gpio22_grp, gpio23_grp, gpio24_grp, gpio25_grp,
+ gpio26_grp, gpio27_grp, gpio28_grp, gpio29_grp, gpio30_grp,
+ gpio31_grp, gpio32_grp, gpio33_grp, gpio34_grp, gpio35_grp,
+ gpio36_grp, gpio37_grp, gpio38_grp, gpio39_grp, gpio40_grp,
+ gpio41_grp, gpio42_grp, gpio43_grp, gpio44_grp, gpio45_grp,
+ gpio46_grp, gpio47_grp, gpio48_grp, gpio49_grp, gpio50_grp,
+ gpio51_grp, gpio52_grp, gpio53_grp, gpio54_grp, gpio55_grp,
+ gpio56_grp, gpio57_grp, gpio58_grp, gpio59_grp, gpio60_grp,
+ gpio61_grp, gpio62_grp, gpio63_grp, gpio64_grp, gpio65_grp,
+ gpio66_grp, gpio67_grp, eth1_grp, i2s0_grp, i2s0_mclkin_grp,
+ i2s1_grp, i2s1_mclkin_grp, spi0_grp
+- function: An array of strings, each string containing the name of the
+ pinmux functions. The following are the list of pinmux
+ functions available:
+ nand, spi, emmc, sdio, eth0, pwm0, pwm1, pwm2, pwm3, pwm4,
+ pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11, pwm12, pwm13,
+ pwm14, pwm15, pwm16, pwm17, pwm18, pwm19, pwm20, pwm21, pwm22,
+ pwm23, pwm24, pwm25, pwm26, pwm27, pwm28, pwm29, pwm30, pwm31,
+ pwm32, pwm33, pwm34, pwm35, pwm36, i2c0, i2c1, i2c2, i2c3,
+ i2c4, uart0, uart1, uart2, uart3, uart4, uart5, uart6, uart7,
+ uart8, uart9, uart10, uart11, uart12, uart13, uart14, uart15,
+ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, gpio8,
+ gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, gpio15, gpio16,
+ gpio17, gpio18, gpio19, gpio20, gpio21, gpio22, gpio23,
+ gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30,
+ gpio31, gpio32, gpio33, gpio34, gpio35, gpio36, gpio37,
+ gpio38, gpio39, gpio40, gpio41, gpio42, gpio43, gpio44,
+ gpio45, gpio46, gpio47, gpio48, gpio49, gpio50, gpio51,
+ gpio52, gpio53, gpio54, gpio55, gpio56, gpio57, gpio58,
+ gpio59, gpio60, gpio61, gpio62, gpio63, gpio64, gpio65,
+ gpio66, gpio67, eth1, i2s0, i2s0_mclkin, i2s1, i2s1_mclkin,
+ spi0
+ pinctrl: pinctrl@50 {
+ compatible = "bitmain,bm1880-pinctrl";
+ reg = <0x50 0x4B0>;
+ pinctrl_uart0_default: uart0-default {
+ pinmux {
+ groups = "uart0_grp";
+ function = "uart0";
+ };
+ };
+ };
 \ /
  Last update: 2019-04-24 14:04    [W:0.072 / U:0.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site