[lkml]   [2019]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/5] Add of_ functions for device_link_add()
It could happen that we need to control suspend/resume ordering between
devices without obvious consumer/supplier link. For example when touchscreens
and DSI panels share the same reset line, in this case we need to be sure
of pm_runtime operations ordering between those two devices to correctly
perform reset.
DSI panel and touchscreen aren't sharing any heriachical relationship (unlike
I2C client and I2C bus or regulator client and regulator provider) so we need
to describe this in device-tree.

This series introduce of_device_links_{add,remove} and devm_of_device_links_add()
helpers to find and parse 'links-add' property in a device-tree node.
It allows to create and remove links between consumer and suppliers from
device-tree data so consumers will be suspend before their suppliers and resume
after them.

Benjamin Gaignard (3):
of/device: Add of_ functions for device_link_{add,remove}
Input: edt-ft5x06: Document links-add property
Input: goodix: Document links-add property

Yannick Fertré (2):
input: edt-ft5x06 - Call devm_of_device_links_add() to create links
input: goodix - Call devm_of_device_links_add() to create links

.../bindings/input/touchscreen/edt-ft5x06.txt | 2 +
.../bindings/input/touchscreen/goodix.txt | 2 +
drivers/input/touchscreen/edt-ft5x06.c | 2 +
drivers/input/touchscreen/goodix.c | 3 +
drivers/of/device.c | 103 +++++++++++++++++++++
include/linux/of_device.h | 20 ++++
6 files changed, 132 insertions(+)


 \ /
  Last update: 2019-04-24 12:20    [W:0.234 / U:0.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site